• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.9-14
• /
• 2023

In this study, an experiment was conducted to confirm the applicability of the external shape control of the ultrasonic knife to the CFRTP material, which is the base material of thermoplastic. TC910 based on polyamide6 (PA6) was used as the material. The slope 와 and tool transfer speed of the material and tool were selected as process factors for processing, and the following results were obtained. Under all cutting conditions using an ultrasonic knife, friction heat caused by high-frequency vibration was issued at 150℃ at the contact part between the material and the knife during cutting. As a result of the cutting force analysis, the faster the transfer speed, the higher the cutting force as the angle of entry of the blade increased, and the size of the cutting force changed during cutting. As for the size of the burr in accordance with the transfer speed condition, the smallest burr occurred at 150mm/min in the side part, and the smallest burr occurred at 150mm/min and 200mm/min in the case of the outlet burr. The size of the burr according to the entry angle tended to decrease as the tool entry angle increased, and the side part tended to increase as the tool entry angle increased. As a result of the cutting surface analysis, it was confirmed that the base material was eluted under all conditions, and the faster the transfer speed, the lower the elution phenomenon of the base material. Based on the above results, cutting the CFRTP material with an ultrasonic knife is possible, but the effect on heat generation caused by friction needs to be minimized, and further research needs to be conducted on this.

• Industry Promotion Research
• /
• v.7 no.4
• /
• pp.9-15
• /
• 2022

This study evaluated the automated system of the roll bending process, which is one of the difficult processes. In the past, 20 cartridges were produced per hour. but Automation changed it to a process that produces 50 pieces per hour. The average value of production was 57.6 pieces per hour, error of repeatability was 0.03 mm, average roll diameter error value was 0.49 mm, average alignment error value was 0.09 mm and average process lead time was 43.21 seconds. This paper presented specific evaluation methods such as productivity, repeatability, defect rate, alignment defect rate, and process lead time. It is thought that the contents performed in this study will be helpful in the verification of other automation systems in the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.15-20
• /
• 2019

Inspection and measurement of surface quality is one of the most critical processes for manufacturing products such as semiconductor wafers, sapphire substrates, and display panels. The vibrations of the inspection and measurement devices are supposed to be the most dominant factors for severe measurement errors and longer measuring time. In this study, dynamic characteristics of an inspection and measurement device are analyzed through frequency response experiment and computer simulation to obtain parameters such as frequencies, magnitudes, mode shapes, and periods of vibrations. And then an active damper which consists of sensor, interface board, and actuator is designed based on the parameters to formulate the most effective reaction signal to suppress the vibrations which is generated by an interface board, and provided by an actuator. If the vibrations are measured by the sensor, the active damper immediately generates and provides the corresponding reaction signal to inspection and measurement device. The result shows that the active damper can suppress structural vibrations effectively and reduce measuring time of the device and enhance the productivity.

• Research in Plant Disease
• /
• v.24 no.4
• /
• pp.302-307
• /
• 2018

From 2014 to 2016, approximately 5% of okra fruit were observed displaying gray mold symptoms at the research field of Jeollabuk-do Agricultural Research and Extension Services, Korea. The symptoms observed were water-soaked, brown or gray spots, and abundant mycelial with conidia appearing on the infected fruit. Initial infection commenced from the base of fruit and gradually moved to the pod, where it finally resulted in collapse. Colonies on potato dextrose agar were gray to grayish brown, felted and cottony expanding 65-80 mm after one week. The fungus formed several black sclerotia ranging $1.0-3.5{\times}0.5-3.0mm$ on the Petri dish after two weeks. The conidia were one-celled, ellipsoidal or ovoid, colorless or pale brown, and $6.2-15.4{\times}5.0-10.4{\mu}m$. Conidiophores arose solitary or in groups, straight or flexuous, septate, with an inflated basal cell brown to light brown, and measured $85-450{\times}10.0-40.0{\mu}m$. On the basis of the morphological characteristics and phylogenetic analyses of internal transcribed spacer rDNA, the fungus was identified as Botrytis cinerea Pers. Pathogenicity of a representative isolate was proved by artificial inoculation, fulfilling Koch's postulates. To our knowledge, this is the first report on the occurrence of B. cinerea on okra in Korea.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.557-570
• /
• 2023

The purpose of this study is to develop a digital-based non-face-to-face instructional design model for national public servants. For this purpose, we reviewed the direction of non-face-to-face instructional design based on previous research, and interviewed a total of 10 instructors and learners with experience in non-face-to-face education to identify the success factors of non-face-to-face instructional design for government employees. In addition, to ensure the validity of the instructional design model, a Delphi survey was conducted with experts in instructional design and educational management. As a result, the digital-based instructional design model for national public servants reflects the importance of learning objectives and content design to enhance learning motivation and improve educational effectiveness, and includes detailed implementation plans to support specific and clear performance activities for instructors in non-face-to-face education situations. The instructional design model developed through this study can be expanded as a standard for improving the quality of education in public human resource development, and can be used as a teaching and learning guide according to learner types and characteristics.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2019

In order to examine the functionality of broccoli sprout (Brassica oleracea, BS), solvent extracts were prepared and their anti-oxidative and immunomodulating activities were compared with those of broccoli (B). EtOH extracts (E) were potently higher than hot-water extracts (HW) in the antioxidant contents and radical scavenging activity. In particular, the total polyphenolic contents in addition to ABTS and DPPH radical scavenging activity were significantly higher in EtOH extract of broccoli sprout (BS-E; 9.15 mg GAE/g, 4.52 mg AEAC/g, and 1.14 mg AEAC/g) compared with that of broccoli (B-E; 7.83 mg GAE/g, 3.63 mg AEAC/g, and 0.97 mg/AEAC/g). Whereas, total flavonoid content was significantly higher in B-E (1.60 mg QE/g) than BS-E (1.43 mg QE/g). Anti-inflammatory activity was investigated using LPS-induced cell line model at a concentration of $10{\sim}100{\mu}g/mL$, in which all solvent extracts of both broccoli sprouts and broccoli were not toxic to RAW 264.7 cell lines. In anti-inflammatory activity of broccoli sprouts, EtOH extracts also showed significantly more potent activity than hot-water extracts in all sample concentrations tested. In addition, BS-E ($100{\mu}g/mL$) inhibited nitric oxide (NO) and IL-6 production to 60.9% and 68.9% compared with the LPS inflammation group (without extracts), whereas B-E inhibited 49.6% and 54.9%. On the other hand, in immunostimulating activity by splenocytes and macrophages, hot-water extract showed significantly higher activity than EtOH extract. Especially, BS-HW stimulated the splenocyte proliferation (1.2-fold against saline group) and IFN-${\gamma}$ production (264.39 pg/mL) at $100{\mu}g/mL$, and the production of IL-6 (1.33-fold), IL-12 (1.09-fold) and TNF-${\alpha}$ (1.49-fold) from macrophages was also significantly enhanced over broccoli. In conclusion, broccoli sprouts showed more potent anti-oxidative, anti-inflammatory and immunostimulating activity than broccoli, suggesting the possibility of using broccoli sprouts as functional food materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.52-59
• /
• 2020

Currently, the domestic electricity rates for houses are charged by applying a progressive level according to monthly electricity usage. Electricity rates rise sharply wWhen the amount of electricity used is large, electricity rates rise sharply. The standardized electricity rate progressive system has limitations in that it lacks consideration of the consumers' power usage patterns and limits consumers' their options. Accordingly, the Ministry of Trade, Industry and Energy and the Korea Electric Power Corporation have been demonstrating the basis of a rate system for housing, which is a method of charging electricity according to the amount of electricity used by season and time. In this paper, 10 electricity usage patterns were derived through from AMI data analysis for 5 five years of 362 apartment complexes located in metropolitan cities. The patterns were, and then applied to the existing domestic electricity rate and time-by-time rates applied to demonstrations, and by time-by-time rates in the US and Australia. The effect of the optional rate by pattern was compared and analyzed. As a result, it was confirmed that benefits occurred in five5 patterns compared to existing rate plans, and the electricity rates increased in 5 five patterns, and t. This phenomenon shows the same phenomenon withis the same as the overseas rates, including domestic rates being demonstrated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.649-656
• /
• 2019

Flux cored arc welding (FCAW), which is used widely in many fields, such as shipyards, bridge structures, construction machinery, and plant industry, is an alternative to shielded metal arc welding (SMAW). FCAW is used largely in the welding of carbon and alloy steel because it can be welded in all poses and obtain excellent quality in the field under a range of working conditions. In this study, the mechanical properties of welded parts were analyzed after different welding of SS400 and SM490A using FCAW. The following conclusions were drawn. The tensile test results satisfied the KS standard tensile strength in the range of 400~510 N/mm2 in all welding positions. The bending test confirmed that most of the specimens did not show surface breakage or other defects during bending and exhibited sufficient toughness, even after plastic deformation. The hardness test results were lower than the standard value of 350 Hv of KS B 0893. Similar to the hardness test, were greater than the KS reference value. The macro test revealed no internal flaws, non-metallic inclusions, bubbles or impurities on the entire cross section of the weld, and there were no concerns regarding lamination.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.651-661
• /
• 2021

Eruca sativa, called arugula, is a perennial plant in the Brassicaceae family, an edible plant commonly used in Italian cuisine. To study as a cosmetic material application E. sativa was extracted with 70% ethanol (ES). Then ES was fractionated using n-hexane, chloroform, ethyl acetate, n-butyl alcohol and water (EHex, EEA, ECHCl₃, EBuOH and EDW). EEA showed mushroom tyrosinase inhibitory activity. ES, EEA and EBuOH showed inhibition of tyrosinase activity. As a result, ES is expected to have skin whitening efficacy. ES was applied to 0.05, 0.1% the toner and emulsion formulation to test the stability. The anti-microbial activity of eight bacteria and fungi including Staphylococcus aureus and Propionibacterium acnes which cause dermatitis and acne was evaluated. EEA showed effects in all of microorganisms. The toner and emulsion containing ES with 0.05, 0.1% were passed in the challenge test. At -20, 4, 25, 55 ℃ and daylight, there was no significant change on pH, viscosity for 4 months. However, emulsions had phase separation phenomenon at 55 ℃, so the base formulation needs improvement. In addition, through the skin penetration test, EEA penetrated 0.058% in 6 hr, predicting the clinical efficacy. This means that E. sativa can contribute whitening agent and the synergistic effect of preservatives.