• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.822-828
• /
• 1998

Binary system of water and polyoxyethylene dodecyl ether, $C_{12}H_{25}(OCH_2CH_2)nOH$, have been studied by $^1H$ NMR techniques. For n=5($C_{12}EO_5$) and n=8($C_{12}EO_8$), the self-diffusion coefficients of nonionic surfactants in the isotropic phase($L_1$) have been measured by using pulsed field gradient technique for a range of temperature and concentrations. In addition the line widths of the different proton signals have been monitored, and samples of some liquid crystalline characteristic were also studied. Dramatic Broadening of the methylene signals of the alkyl($C_{12}H_{25}$) chain is observed as the hexagonal liquid crystalline phase is approached in the $C_{12}EO_5-$water system, while only small broadening is observed in the $C_{12}EO_8-$water system. It was shown that there was a growth of $C_{12}EO_5$ micelles to rods with increasing concentrations, while the $C_{12}EO_8-$ micelles at low temperature remain small in the concentration range. The self-diffusion coefficients of the surfactants decrease rapidly with increasing concentration until a minimum is reached after which there is slow increase. The location of the minimum point occurs at lower concentrations the temperature is close to the cloud point, where the system separate into two isotropic phase. In the line width studies, broadening is found at a certain temperature interval when the concentration is increased in the $C_{12}EO_5$ system. The results indicate that the surfactant aggregates grow in size at the cloud point is approached. The aggregates seem to be flexible and probably not to be of a definite shape close to the cloud point. In the $C_{12}EO_8$ system, the micelles are much less affected by an increase in temperature and micellar growth can't be unambiguously established. The methylene signals of the ethylene oxide moieties consistantly show narrower $^1H$ signals, showing that in the aggregates they are less ordered than the chain methylenes. The various changes in aggregate size and shape are correlated with the stability ranges of the isotropic and liquid crystalline phases according to phase diagrams from the literature. Both aggregate size and phase structure are in qualitative agreement with concentration based on the effective shape of the molecules at different temperature and concentration.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1086-1091
• /
• 1999

$K^+-{\beta}/{\beta}"-Al_2O_3$ in the ternary system $K_2O-MgO-Al_2O_3$ was directly synthesized by solid state reaction. The phase formation and phase relation were carefully investigated in relation to starting composition, calcining temperature and time, and dispersion medium. The optimal synthetic condition was also examined for the formation of ${\beta}"-Al_2O_3$ phase with a maximum fraction. As a composition range, the mole ratio of $K_2O$ to $Al_2O_3$ was changed from 1:5 to 1:6.2 and the amount of MgO used as a stabilizer was varied from 4.2 wt % to 6.3 wt %. The calcining temperature was selected between $1000^{\circ}C$ and $1500^{\circ}C$. At $1000^{\circ}C$, the ${\beta}/{\beta}"-Al_2O_3$ phases began to form resulted from the combining of ${\alpha}-Al_2O_3$ and $KAlO_2$ and increased with temperature rising. All of ${\alpha}-Al_2O_3$ phase disappeared to be homogenized to the ${\beta}/{\beta}"-Al_2O_3$ phase at $1200^{\circ}C$. Near the temperature at $1300^{\circ}C$, the fraction of ${\beta}"-Al_2O_3$ phase showed a maximum value with the composition of $K_{1.67}Mg_{0.67}Al_{10.33}O_{17}$. At temperatures above $1300^{\circ}C$, the fraction of ${\beta}"-Al_2O_3$ phase decreased gradually owing to $K_2O$ loss caused by a high potassium vapor pressure, and the appropriate calcining time was about 5 hours. Acetone was more effective than distilled water as a dispersion medium for milling and mixing.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.77-87
• /
• 2008

Wooden model erosion control dam was made with pitch pine, of which the strength properties was evaluated. Wooden model erosion control dam was made with diameter 90 mm of pitch pine round posts treated with CUAZ-2 (Copper Azole), changing joint in three different types. In each type, erosion control dam was made in nine floor (cross-bar of five floors and vertical-bar of four floors), of which the hight was 790 mm. And then strength properties were investigated through horizontal loading test and impact strength test, and the deformation of structure through image processing (AICON 3D DPA-PRO system). In horizontal loading test of wooden model erosion control dam using round post of diameter 90 mm, whether there was stone or not did not affect strength much when using self drill screw, but strength was decreased by 23%. In monolithic type of erosion control dam using screw bar, strength was increased by 1.5 times and deformation was decreased when filling with stone. When reinforcing with screw bar that ring is connected to self drill screw, strength was increased by 4.8 times. In impact strength test of wooden model erosion control dam made with round post of diameter 90 mm, the erosion control dam connected with self drilling screw not filling with stone was totally destroyed by the 1st impact, and the erosion control dam using screw bar was ruptured at cross-bar at which 779 kgf of impact was loaded in the 1st impact. In the 2nd impact, the base parts were ruptured, and reaction force was decreased to 545 kgf. In the 3rd impact, whole base parts were destroyed, and reaction force was decreased to 263 kgf.

• Horticultural Science & Technology
• /
• v.18 no.5
• /
• pp.612-620
• /
• 2000

In developing soil wetting agent using polyoxyethylene octylphenyl ether [$C_8H_{17}O(C_2H_4O)_{10}H$, POE], the effect of mixtures of POE and polyoxyethylene+polypropyleneoxide tridecylether (1:1, w/w, CM-1), polyoxyethylene+polypropyleneoxide tridecylether+propyleneglycol monomethylether (1:1:2, w/w/w, CM-2) or glycerin+ditridecyl phthalate (1:1, w/w, CM-3) on changes of concentration of POE, initial wetting, evaporative water loss, water infiltration, and changes of physical properties in root media were determined. The mixtures of POE and CM-1, 2, or 3 with zeolite or vermiculite as carrier had high concentrations of POE in root media during 6 elution times, but those after 6 times decreased rapidly indicating unstable elution of POE. The commercial AquaGro was more effective than the mixtures of POE+CM-1, 2, or 3 in water retention during 18 hours. Root media incorporated with POE+CM-2 held more water than any other treatments at 84 hours after watering, but the differences among treatments except control were not significant. In the treatments with zeolite as a carrier, POE+CM-3 had the greatest evaporative water loss followed by POE+CM-2, AquaGro, control, and POE+CM-2. In the treatments with vermiculite as a carrier, POE+CM-1 had the highest evaporative water loss followed by POE+CM-3, AquaGro, control, and POE+CM-2. In the effect of mixtures with zeolite as a carrier on infiltration of water into root media, the treatment of POE+CM-1 had the highest amount of water infiltrated followed by POE+CM-3, AquaGro, POE+CM-2, and control. In the effect of mixtures with vermiculite as a carrier on infiltration of water into root media, the treatment of POE+CM-3 had the highest amount of water infiltrated followed by AquaGro, POE+CM-1, POE+CM-2, and control.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.377-384
• /
• 2015

A survey of the artificial radionuclides in rivers and lakes was conducted to investigate their levels in surface water. Water samples were collected at 60 points and analyzed by gamma-ray spectrometry with a measurement time of 10,000 seconds for ¹³⁴Cs, ¹³⁷Cs, and ¹³¹I. The obained values were lower than MDA for all points, except one point for ¹³¹I that was 0.533±0.058 Bq/L. ¹³¹I is known as a radioactive material that occurs frequently in sewage treatment plants. Because it is often used for medical treatments and subject to spreading into the environment due to the excretion from the patients. For the point where ¹³¹I was detected, we conducted additional investigation on the upstream river point and the effluent points of nearby sewage treatment plant to find the source of ¹³¹I. ¹³¹I was not detected at the upstream points of one of the upstream sewage treatment plants but found at the downstream points with the level being 0.257±0.034 to 0.799±0.051 Bq/L, proving the sewage treatment plant was the ¹³¹Isource.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.85-95
• /
• 2016

In this study, furfural, which is one of the value-added chemicals, was produced from the hydrolyzate of Quercus mongolica using dilute acid pretreatment, and the optimal pretreatment condition was determined by Response Surface Methodology (RSM) to obtain high yield of furfural. Based on Central Composite Design, the pretreatment experiment was designed with parameters such as reaction temperature ($X_1$), acid concentration ($X_2$), and reaction time ($X_3$) as independent variables, while dependent variable was furfural concentration (Y), and furfural yield (Z) was shown as percentage of Y per a dry weight basis. According to results of RSM, it was confirmed that reaction temperature ($X_1$) was the most influence factor and reaction temperature ($X_1$)-acid concentration ($X_2$) was the most significant interaction factor on furfural yield. Also, the optimal condition for the highest furfural yield was predicted at reaction temperature of $184^{\circ}C$, acid concentration of 1.17%, and reaction time of 5 min by RSM, and expected maximum yield of furfural was 6.37%. Experimentally, the maximum yield of furfural produced at above optimal condition was 6.21%, and it was considerably similar with the predicted value, and therefore the model for furfural production from the hydrolyzate of Quercus mongolica during dilute acid pretreatment could be built using RSM.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.251-265
• /
• 1999

Various types of horizontal reference planes are used for diagnosis, treatment planning and evaluation of treatment results. But these reference Planes lack accuracy and repro-ducibility, and are mainly for Caucasian. Unlike the adult patients who have completed growth, the horizontal reference planes for growing children may change continuously during growth. Therefore this must be considered in selecting the horizontal reference plane. The purpose of this study was to Investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the angle formed by FH plane and other horizontal reference planes in relation to different skeletal maturity and malocclusion types. 540 subjects with no orthodontic treatment history were chosen, and hand -wrist X-rays and lateral cephalometric X-rays were taken. According to SMA(Skeletal Maturity Assessment) of hand-wrist X-rays, the subjects were classified into 3 skeletal maturity groups : SMI 1-4 for group A, SMI 5-7 for group B and SMI 8-11 for group C. A second classification was made according to cephalometric analysis of lateral cephalograms. The subjects were classified into 3 malocclusion groups : Skeletal Class I, II and III malocclusion group. 10 measurements were evaluated. The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among skeletal maturity groups, malocclusion groups, and between .sexes. 2. The angles formed by the SN plane and FH plane were $8.27^{\circ}{\pm}2.31^{\circ}$ for males and $8.59^{\circ}{\pm}2.24^{\circ}$ for females. The average value for females and males was $8.42^{\circ}{\pm}2.28^{\circ}$. 3. The angle formed by the FH plane and palatal plane was almost constant showing no difference among skeletal maturity groups, malocclusion groups, and between sexes($1.09^{\circ}{\pm}3.21^{\circ}$).

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.419-435
• /
• 2003

The purpose of this study was to evaluate growth changes and skeletal characteristics of Korean children with Class III malocclusions from 10 to 14 years of skeletal age. Radiographs of 60 children with Class III malocclusion and 60 normal controls were assessed. Both groups were subdivided into 6 samples according to sex and skeletal age. Skeletal age was assessed using handwrist X-rays using the Greulich and Pyle norms. The Krogman-Walker plane (occipitale-maxillon) through Sella was used as a reference plane in this study with x-axis perpendicular to the x-axis. Sir Student t-tests were conducted to compare the control group with the Class III group according to each gender a:nd age. The characteristics of Class III malocclusion group compared to the control group included shorter anterior and posterior cranial base, shorter and retrusive maxilla, forger mandible, increased molar-incisor distance, retroclined lower incisors, labially proclined upper incisors, and anteriorly located mandibular molar, smaller upper and middle facial depth, and larger lower facial depth. Landmarks representing facial depth, size of maxilla and mandible, and their AP relationship including anterior facial height indicate that growth characteristic was determined early in life. But growth Pattern of cranial base and some of the dental landmarks showed progressive divergence between Control and Class III groups with age. The position of the posterior border of the mandible was found to be significantly forward in both females and males by the age of 14 and at the anterior border in males and females at all ages. Hyperdivergent mandibular plane, changes in anterior segment of mandible, small anterior cranial base, and decrease in cranial base flexure was also noted.

• Journal of Korean Academy of Nursing
• /
• v.1 no.1
• /
• pp.64-76
• /
• 1970

This report will present a clinical and statistical analysis of 210 case of Ectopic pregnancies who were treated at the Department of Obstetrics and Gynecology at Chung Nam Medical Center from January, 1966 to March, 1970. The results obtained are as follows; 1. The total number of Ectopic pregnancies was 8.22%. 2. The occurrence of Ectopic pregnancy was high in June(13.81%), low in October(2.98%). There was a higher occurrence of Ectopic pregnancy in the summer than in the winter. 3. The average age of all patients was 33.25 years. The most frequent age for this type of pregnancy was 31-35 years (32.86%) . The youngest patient was 18 years old and the oldest was 50. 4. Multipara occurred in 82.38% of the cases; Mulipara in 17. 62% and the occurrence of primipara was especially high, 20.95%. 5. 48.09% of the women had previously experienced normal deliveries; 42.8% had received artificial abortions and 5.23% had experienced spontaneous abortions. 3.8% had a previous history of Ectopic pregnancy. It was found that the occurrence of Ectopic pregnancy was more frequent in those women who had a D & C in the Past. 6. The average length of infertility was 21.7 months. The shortest length was 60 days; longest period of infertility was 19 years. 7. The occurrence of Ectopic pregnancy is higher (29.27%) in patient who have experienced only one previous D & C. The total number of patients who received a D & C was 58.57%. 3. Ectopic symptoms appeared during the first 4.7 weeks (mean) and most frequently occurred between the 5th and 6th weeks (48.57%) of pregnancy. The Symptoms were: -99.04% complained of lower abdominal pains. -80.95% experienced abnormal uttering bleeding. -42.38% experienced bleeding before the occurrence of pain. -18.57% experienced pain before the occurrence of bleeding. -8.57% experienced both pain and bleeding. -7.62% experienced only bleeding. -22.86% experienced only pain. 9. In-77.62% of the cases the annexal mass palpated. 91.42% complained of abdominal tenderness. 42.38% complained of pain when the cervix was examined. 10. Culdocentesis was performed in 86.19% of the cases. In 92.82% of the cases the presence of an Ectopic pregnancy was accurately diagnosed 11. 71.90% of the Ectopic pregnancies occurred in the ampule portion of the ovarian tube, of the total number of gestations, 40.95% were tubal abortions and 59.05% were ruptured. The ruptured group occurred more frequently in the islamic portion and interstitial portion of the tube than the aborted group. The aborted group occurred more frequently in the fimbrial extremities of the tube. 12. The blood pressure (systolic) was noted at 119-80mmHg in 81.89% of the total cases. Hemoglobin value was noted at over 8gm/㎗ in 58.57% of the cases. The average blood transfusion was 2.3 pints. 13. In 52.86% of the Ectopic pregnancies the right side of the ovarian tube was affected. The left side of the tube was affected in 47.14% of the cases. 14. 3.33% of the patients were not given an accurate diagnosis. 15. The kinds of operation performed were as follows; Salpingectomy, 41.43%; Adnectomy, 38.57% and Adnectomy with total hysterectomy, 19.05%. 16. The patient mortality rate was significantly small; only 1 case out of 210 died. This patient most likely had a profuse hemorrhage because of a ruptured tube before her admission to the hospital. 17. The patients personal feelings and attitudes must be treated with care. Particularly patients who are concerned about vaginal bleeding or the impossibility of another pregnancy.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.460-467
• /
• 2009

This research was conducted for the purpose of investigating the influence substrates addition such as germanium or Granite porphyry gravel have on the growth of foliage, on the inorganic compositions of leaves as well as on root activity, in order to discover effective means of introducing plants to the indoors. Syngonium podophyllum, Dracaena sanderiana, Epipremnum aureum and Hedera helix were used as study subjects to which soil (mixed top-soil: Sunshine Mix No. 2, USA), tap water, tap water with germanium (300g), tap water with Granite porphyry gravel (300g) were added respectively and formulated. Studies on growth variations according to substrates addition indicate that growth of Syngonium podophyllum was most sluggish under tap water only treatment. Plant growth was most active under geranium-gravel treatment. In the case of Dracaena sanderiana, treatment of substrates addition had no meaningful influence on plant growth. However, the growth of Epipremnum aureum and Hedera helix was also shown to be most active under geranium-gravel treatment. Geranium-gravel treatment was shown to be particularly beneficial for root length, number of roots and dry weight. Root activity was analyzed on ten day intervals and there was discernable difference in the root activity of all the plants according to the varying treatments. In the case of the Syngonium podophyllum, the root activity was sluggish in all three types of treatment on the 10th day but improved gradually. On the 30th to the 50th day of the experiment, the root activity was found to be best under the Granite porphyry gravel treatment. In the case of the Dracaena sanderiana, the root activity was most active under the geranium-gravel treatment from the 10th to the 40th day but deteriorated from the 50th day. However, there was no significant different in all three treatments from the 60th day onwards. Analysis of the inorganic components of the leaves indicates that, while Ca and Mg were higher in the geranium than in the Granite porphyry gravel, they do not directly influence the content of inorganic components in the leaves. The results indicate that Epipremnum aureum and Hedera helix grow better under hydro-culture than when grown in soil and growth under hydro-culture is shown to increase when germanium is added to tap water.