• Korean Journal of Microbiology
• /
• v.52 no.1
• /
• pp.98-109
• /
• 2016

The study was aimed to investigate the mixing ratio of kiwi and persimmon juices for the production of good quality wine by Saccharomyces cerevisiae Y28. Firstly, the optimum condition of rapidase treatment for the kiwi and persimmon juices was established, thereafter various mixing ratio (10:0, 9:1, 8:2, 7:3, 6:4, 5:5) of kiwi and persimmon was investigated regarding physiochemical properties and flavor compounds of wine. As the result, the optimum conditions were obtained as 0.3% rapidase for 1 h in kiwi and 0.3% rapidase for 3 h in persimmon. According to higher ration of persimmon, the pH of wines increased from 3.69 to 3.77, while the acidity of wines decreased from 2.07% to 1.51% at 14 days fermentation. The ranges of brix and reducing sugar in wines were decreased which ranges around 9.6 to 8.8 and 6.07 to 6.90 g/L, respectively, after fermentation. Major organic acid in wines were identified as tartaric acid, malic acid, and citric acid. A small amount of free sugar such as sucrose and glucose were detected in wines, but fructose was completely absent. The soluble phenolic contents were decreased that ranges around 1.00 to 1.25 g/L, in contrast, browning degree were increased ranges around 0.212 to 0.412 after fermentation. The major flavor components were identified as ethyl acetate and hydrazine, and 1,1-dimethyl. Importantly, phenylethyl alcohol was detected from the all wines that have a typical rose like flavor. But sensory test results and preference of kiwi-persimmon (7:3) mixing wine was better than the other wines.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.471-490
• /
• 2016

This study investigated provenance of raw materials and making technique of lime-based materials used in the tomb barriers of the Yesan Mokri tombs from Joseon dynasty on the basis of analysis to material characteristics and physical properties. In the barrier materials, dry density and porosity are the highest value ($1.82g/cm^3$) and the lowest value (25.20%) in the south wall of No. 1 tomb, respectively. Dry density and porosity are inversely proportional in all barrier materials, but unconfined compressive strength, which is the highest value of $182.36kg/cm^2$ in the No. 2 tomb, does not show an interrelation with porosity and density. Mineral components in the lime-soil mixtures of the tomb barrier are mainly quartz, feldspar, mica and calcite about 200 to $600{\mu}m$ size with yellowish brown matrix. Hydrotalcite and portlandite are detected in the lime mixture, and kaolinite in the soils. The lime materials of the tomb barrier occurred in large quantities weight loss and variable endothermic peaks caused by decarbonization reaction of $CaCO_3$ in the range from 600 to $800^{\circ}C$ in thermal analysis. Making temperature of lime for the tomb barrier is presumed approximately about $800^{\circ}C$ based on the occurrences, compositions and thermal analysis. The tomb barriers are revealed to very wide composition ranges of major elements and loss-on-ignition (22.5 to 33.6 wt.%) owing to mixture of the three materials (lime, sand and clay). It is interpreted that low quality construction technique was applied as the limes are very heterogeneous mixture with aggregates, and curing of the lime was poorly processed in the tomb barriers. Possible limestone sources are distributed in many areas around the Mokri site where limestone conformation and quarries for commercial production are found within Yesan and Hongseong areas. Therefore, we estimated that raw materials were possibly supplied from the local mines near the Mokri site.

• Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.95-100
• /
• 2007

The cellulase gene of Bacillus licheniformis K11 which has plant growth-promoting activity by auxin and antagonistic ability by siderophore was cloned in pUC18 using PCR employing heterologous primers. The 1.6kb PCR fragment contained the full sequence of the cellulase gene, denoted celW which has been reported to encode a 499 amino acid protein. Similarity search in protein data base revealed that the cellulase from B. licheniformis K11 was more than 97% identical in amino acid sequence to those of various Bacillus spp. The cellulase protein from B. licheniformis K11, overproduced in E. coli DH5${\alpha}$ by the lac promoter on the vector, had apparent molecular weight of 55 kDa upon CMC-SDS-PAGE analysis. The protein not only had enzymatic activity toward carboxymethyl-cellulose (CMC), but also was able to degrade insoluble cellulose, such as Avicel and filter paper (Whatman$^{\circledR}$ No. 1). In addition, the cellulase could degrade a fungal cell wall of Phytophthora capsici. Consequently B. licheniformis K11 was able to suppress the peperblight causing P. capsici by its cellulase. Biochemical analysis showed that the enzyme had a maximum activity at 60$^{\circ}C$ and pH 6.0. Also, the enzyme activity was activated by Co$^{2+}$ of Mn$^{2+}$ but inhibited by Fe$^{3+}$ or Hg$^{2+}$. Moreover, enzyme activity was not inhibited by SDS or sodium azide.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.173-182
• /
• 2007

It is well known that manganese nodules enriched with valuable metals are abundantly distributed in the abyssal plain area in the Clarion-Clipperton (C-C) fracture zone of the northeast Pacific. Previous studies using deep-sea camera (DSC) system reported different observations about the relation of seafloor topographic change and nodule abundance, and they were sometimes contradictory. Moreover, proper foundation on the estimation of DSC underwater position, was not introduced clearly. The variability of the mining condition of manganese nodule according to seafloor topography was examined in the Korea Deep Ocean Study (KODOS) area, located in the C-C zone. In this paper, it is suggested that the utilization of deep towing system such as DSC is very useful approach to whom are interested in analysing the distributional characteristics of manganese nodule filed and in selecting promising minable area. To this purpose, nodule abundance and detailed bathymetry were acquired using deep-sea camera system and multi-beam echo sounder, respectively on the seamount free abyssal hill area of southern part ($132^{\circ}10'W$, $9^{\circ}45'N$) in KODOS regime. Some reasonable assumptions were introduced to enhance the accuracy of estimated DSC sampling position. The accuracy in the result of estimated underwater position was verified indirectly through the comparison of measured abundances on the crossing point of neighboring DSC tracks. From the recorded seafloor images, not only nodules and sediments but cracks and cliffs could be also found frequently. The positions of these probable unminable area were calculated by use of the recorded time being encountered with them from the seafloor images of DSC. The results suggest that the unminable areas are mostly distributed on the slope sides and hill tops, where nodule collector can not travel over.

• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.465-472
• /
• 2010

This study surveyed salivary flow rate, salivary viscosity, and salivary buffering capacity in order to intensively analyze salivary factors among factors of occurrence in dental caries for finding mutually different factors that function in occurrence of dental caries depending on each individual. Even the acid body within dental plaque has great influence upon dental caries. Thus, the comparative analysis was carried out by surveying the hydrogen ion concentration in dental plaque. The following results were obtained in this study. 1. The average decayed teeth in the survey subjects stood at 1.67 piece. The extracted teeth caused by dental caries stood at 0.47 piece. The filled teeth were indicated to be 6.31 pieces. Accordingly, the average permanent dental caries experience teeth were surveyed to be 8.44 pieces. 2. The results according to dental caries activity test method were indicated to be $12.56{\pm}4.15ml$ for the average stimulated salivary flow rate, $3.89{\pm}1.83ml$ for non-stimulated salivary flow rate, $1.49{\pm}0.69$ for salivary viscosity, and $8.51{\pm}2.44$ for salivary buffering capacity. The hydrogen ion concentration test in dental plaque was indicated to be $5.62{\pm}0.50$ for before brushing teeth, $5.23{\pm}0.58$ for 5 minutes after brushing teeth, $5.25{\pm}0.56$ for 10 minutes after brushing teeth, $5.29{\pm}0.62$ for 15 minutes after brushing teeth, $5.34{\pm}0.58$ for 20 minutes after brushing teeth, $5.40{\pm}0.53$ for 25 minutes after brushing teeth, and $5.61{\pm}0.59$ for 30 minutes after brushing teeth. 3. Stimulated salivary and non-stimulated salivary flow rate, salivary viscosity, and salivary buffering capacity were indicated to be higher in group with non-caries than group with caries. However, it was statistically insignificant. The hydrogen ion concentration in dental plaque showed wholly statistical significant in the relationship with people with dental caries under progression. However, people without dental caries were indicated to be higher than people with dental caries. 4. As for correlation between caries activity test methods, the stimulated salivary flow rate had significantly positive correlation with non-stimulated salivary flow rate(p<0.001). Non-stimulated salivary flow rate showed negative correlation with salivary buffering capacity(p<0.01). The hydrogen ion concentration test in dental plaque showed positive correlation according to the passage of time after brushing teeth. However, there was no significant correlation with salivary viscosity and salivary buffering capacity(p>0.05).

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.319-325
• /
• 2018

The aim of the present study was to determine the influence of different fertilizer combinations on the growth, yield, and fruit quality of 'Duke' blueberry cultivar and the water quality of growth medium. The experiment was carried out with three year old 'Duke' blueberry bushes which were cultivated in containers ($60{\times}80{\times}40cm$) filled with 130 L peat moss and 40 L pearlite (v/v). Sawdust was used as the mulch in growth containers. Three different fertilizer combinations (FC) i.e., FC-1 consisted with standard solution, FC-2 consisted with nitrogen reduced by 10% from FC-1, and FC-3 consisted with nitrogen reduced by 20% from FC-1 were tested while, the ground water used as the control. The effects of different fertilizer combinations on shoot diameter, shoot length, number of shoots, leaf length, SPAD value (the relative content of chlorophyll), berry weight, soluble solids content, titratable acidity, and yield per bush in 'Duke' blueberry were examined. Also, the effects of different fertilizer combinations on pH, EC, $NH_4$ and $NO_3$ in 'Duke' blueberry growth medium were monitored. The highest pH and lowest EC, $NH_4$ and $NO_3$ in growth medium was recorded with control treatment during the experiment period. The maximum shoot diameter (3.7 mm) and shoot length (35.7 cm) was recorded for the FC-1. Highest number of shoots (47%) were recorded from 'Duke' blueberry bushes supplemented with FC-1 compared to other treatments. The fertilizer combinations supplemented with nitrogen showed significant influence on leaf length and SPAD value compared to control 'Duke' blueberry bushes. However, the fruit quality attributes, i.e., berry weight, soluble solids content, and titratable acidity were not significant different among fertilizer treatments. The significantly highest yields per bush were recorded for FC-1, FC-2, and FC-3, as 2.2, 2.9, and 2.7 kg, respectively compared to control (0.2 kg). Although, the FC-1 was supplemented with highest nitrogen content it resulted low yield per bush while having high number of shoots and vigorous growth.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.171-180
• /
• 2020

The effect of three different light qualities on growth, photosynthesis, quality and safe parameters of hydroponic cultivated spinach (Spinacia oleracea L.) were investigated indoor. Three different light qualities were created of red (660 nm), blue (450 nm) and green (550 nm) LEDs corresponding at ratio R660/B450 = 4/1 (RBL); R660/B450/G550= 5/2/3 (WWL); R660/B450/G550 = 1/1/1 (WL), which were tested at the same intensity (PPFD =190 μmol m^-2 s^-1). The results showed that the plant height and leaf number were the lowest in WL treatment. The SPAD, Net photosynthesis rate Pn, Fv/Fm, Leaf area index LAI values and all parameters of root characteristics were the highest in RBL treatment and were significantly different from two others. Fresh weight of stem, leaf and root, dry weight of root in the three light qualities were significantly different. In contrast, the highest K⁺ content in WL was different from WWL and RBL treatments, while Ca²⁺ and Fe²⁺ content were the highest in the RBL treatment. Vitamin C content was significantly different between the three treatments. nitrate and oxalic acid contents were the highest in WL treatment, whereas soluble-solids contents and vitamin C contents were the highest in RBL treatment. Oxalic acid, nitrate contents were observed tending reduced under WWL although oxalic acid content in RBL treatment was not different from WL and WWL treatments. In all three different light treatments were not detected Salmonella, E.coli. Our results suggest that RBL may be appropriate light for growth of spinach, but supplementary green light to a combination of red and blue LEDs at the reasonable rate can change the quality of spinach in a positive direction. Hydroponic cultivated spinach was safe for users.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1084-1091
• /
• 2015

Aquaculture of olive flounder started in the middle of 1980's and now farming has been taken place in many places along the coastal line in Korea. The taste of olive flounder has a good chewy texture because of high collagen content, low fat content, so it is popular for sliced raw fish. Olive flounder is popular among Koreans but the consumption pattern is uniformly so as to be used as sliced raw fish but not other ways. So, now there needs to develop high valued-processed food using olive flounder. This study was set to investigate the processing of terrine by using olive flounder, in which terrine is French style meat loaf that is well favored around the world. In this study, terrine was prepared by chopping olive flounder meat with 39 g egg white and 10 mL fresh cream (per 50 g fillet) and then seasoned with 5 mL lemon juice, 5 mL brandy, 0.05 g salt and 0.05 g pepper. The 25 g of dough was placed on a vinyl wrap, put with 2 g cheese, and layered an another 25 g dough, and then rolled up and wrapped by aluminium foil. Two different cooking methods were used for terrine processing in this study. Terrine-1 was cooked by vacuum sealed in polyethylene film ($20{\times}30{\times}0.05mm$) after boiling for 5 min and stored at $-20^{\circ}C$ for 7 days. Terrine-2 was prepared by vacuum sealed in polyethylene film ($20{\times}30{\times}0.05mm$) and stored at $-20^{\circ}C$ for 7 days. After 7 days, Terrine-1 was thawed and then heated up in microwave for 2 min (Sample-1), while Terrine-2 was thawed and then boiled in water for 5 min (Sample-2). Viable bacterial count, chemical composition, pH, salinity, hardness, TBA, free amino acid content, and sensory evaluation were measured for both Sample-1 and Sample-2. Especially, the scores of sensory evaluation of Sample-2 is slightly higher than that of Sample-1. On the other hand, there were no significant differences on color, odor, taste, texture, and overall acceptance between Sample-1 and Sample-2.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.241-249
• /
• 2013

This study was aimed to provide the fundamental data about oxidized hair color products. For this reason, we collected 125 oxidized hair color products, which were distributed in domestic market from January to October, 2012, and measured the heavy metal concentrations of lead, arsenic, cadmium, chromium, manganese, nickel, copper in the samples. Results were compared by domestic, foreign, henna, type and color. The average metal concentrations were as follows; 0.211 ${\mu}g/g$ for lead, 0.008 ${\mu}g/g$ for cadmium, 0.051 ${\mu}g/g$ for arsenic, 0.954 ${\mu}g/g$ for chromium, 6.250 ${\mu}g/g$ for manganese, 0.591 ${\mu}g/g$ for nickel and 0.544 ${\mu}g/g$ for copper. In case of lead and arsenic, the concentrations were much less than the regulated amount (20 ${\mu}g/g$ and 10 ${\mu}g/g$, respectively) suggested by MFDS (Ministry of Food and Drug Safety). In henna (p < 0.05), the concentrations were significantly higher than those of other domestic and foreign oxidized hair color products as follows; 1.264 ${\mu}g/g$ for lead, 0.267 ${\mu}g/g$ for arsenic, 0.025 ${\mu}g/g$ for cadmium, 4.055 ${\mu}g/g$ for chromium, 72.044 ${\mu}g/g$ for manganese, 3.076 ${\mu}g/g$ for nickel and 4.640 ${\mu}g/g$ for copper. Statistically, it showed that the heavy metal concentrations were quite different for the different types of hair color products. The cream and liquid type products had the highest average concentration in chromium (0.708 ${\mu}g/g$, 0.478 ${\mu}g/g$, respectively). On the other hand, powder type products showed the highest concentration in manganese (60.041 ${\mu}g/g$). In addition, the concentrations of heavy metals and the color of products are not quite correlated. It was shown that average concentrations of lead and chromium were higher for yellow, chromium for red and pink, manganese for brown and black, and nickel for green.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.161-172
• /
• 2011

Open beaker digestion method is routinely used as the sample preparation technique for trace element determination of rock samples by inductively coupled plasma mass spectrometry, With this method, however, dissolution of Zr and Hf is not always guaranteed especially when the samples contain refractory minerals. In this study, glass bead digestion technique was compared with conventional open beaker digestion technique for the sample preparation of three USGS rock standards such as AGV-2, BHVO-2, and G-3. Thirty trace elements including rare earth elements were analysed by ICP-MS and ICP-AES. There were no clear differences in analytical results for the AGV-2 and BHVO-2 standards between the two techniques, but Zr, Hf, Y, and middle- to heavy- rare earth element concentrations of the G-3 standard prepared by open beaker digestion technique were significantly lower than the recommended values. This can be attributed to the presence of refractory mineral zircon. On the contrary, all the analytical results of the G-3 standard prepared by glass bead digestion technique were in good agreement with the recommended values, indicating complete dissolution of zircon. The analytical results show that the volatile elements such as Pb and Zn were not lost during the preparation of glass bead. Low dilution glass bead digestion technique described here will be very helpful to enhance precision and accuracy of trace element analysis for geological samples containing refractory minerals.