• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.56-70
• /
• 2017

In this study, multi-image information for the central Taewha River basin was used to develop and analyze a distribution map of non-point pollution sources. The data were collected using a hyper-sensor (image), aerial photography, and a field spectro-radiometer. An image correction process was performed for each image to develop an ortho-image. In addition, the spectra from the field spectro-radiometer measurements were analyzed for each classification to create land cover and distribution maps of non-point pollutant sources. In the western region of the Taewha River basin, where most of the forest and agricultural land is distributed, the distribution map showed generated loads for BOD($kg/km^2{\times}day$) of 1.0 - 2.3, for TN($kg/km^2{\times}day$) of 0.06 - 9.44, and for TP($kg/km^2{\times}day$) of 0.03 - 0.24, which were low load distributions. In the eastern region where urbanization is in progress, the BOD, TN, and TP were 85.9, 13.69, and 2.76, respectively and these showed relatively high load distributions when the land use was classified by plot.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.3
• /
• pp.23-29
• /
• 2002

A wall-frame type structural system has been widely used to make full use of a limited land in large cities to satisfy the several functional requirement in one building. However, this type of hybrid structure brought some problems due to the vertical discontinuity of a structural system. The response of a wall-frame type structural system having a deep transfer girder was observed. An arch system was introduced to replace the deep transfer girder. The adequacy of an arch system was observed for the various boundary conditions of a system. The proposed system was compared to a general transfer girder system by applying both gravity load and lateral load. It was observed that an arch system fairly distributes the stress without concentrating stress at a certain location of a system differently from the current transfer girder system. The moment decrement effect of a column can also be obtained by eliminating the large mass of a transfer girder. Also it was investigated that an arch system is more economical and effective than the current transfer girder system.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.197-206
• /
• 2004

The ground anchor support system may not be occasionally used because of space limitations in urban excavation sites nearby the existing structures. In this case, soil nailing system with relatively short length of nails could be efficiently adopted as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in an excavation zone of the existing weak subsoils. Pretensioning the soil nails then could play important roles to reduce deformations mainly in the upper part of the nailed-soil excavation system as well as to improve local stability. In this study, a newly modified soil nailing technology named as the PSN (Pretension Soil Nailing), is developed to reduce both facing displacements and ground surface settlements in top-down excavation process as well as to increase the global stability. Up to now, the analytical procedure and design technique are proposed to evaluate maximum pretension force and stability of the PSN system. Also, proposed are techniques to determine the required thickness of a shotcrete facing and to estimate probability of a failure against the punching shear, Based on the proposed procedure and technique, effects of the radius of a influence circle and dilatancy angle on the thickness of a shotcrete facing, bonded length and safety factors are analyzed. In addition, effects of the reduction of deformations expected by pretension of the soil nails are examined in detail throughout an illustrative example and the $FLAC^{2D}$ program analysis. And a numerical approach is proposed PSN system using the shear strength reduction technique with the $FLAC^{2D}$ program.

• Journal of Mushroom
• /
• v.18 no.3
• /
• pp.201-207
• /
• 2020

Mushrooms growing in the Wolchulsan National Park were surveyed from April to October 2018. As a result of this survey, 2 divisions, 9 classes, 24 orders, 71 families, 177 genera, and 407 species were found. Among them, 3 classes, 16 orders, 55 families, 150 genera, and 370 species belonged to Basidiomycota, while 6 classes, 8 orders, 16 families, 27 genera, and 37 species belonged to Ascomycota. The species richness was the highest in September at the altitudes between ~100 and 200 m. Among the investigated sites, the most diverse species occurred in the Gyeongpodae area. In this survey we found, Macrolepiota procera, Suillus bovinus, and Amanita pantherina, all of which have been known as climate-sensitive biological indicator species (CBIS). Based on the DNA sequence analyses, Craterellus parvogriseus was confirmed as a new record for Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.649-660
• /
• 2015

Data obtained from the Calpuff inverse modeling estimate the emission amount of pollutants, and enable to establish the aim for reduction through the comparison of various cases. This study pursued to accumulate the fundamental data by the Calpuff inverse modeling for five areas in the vicinity of Donghae harbor, which focused on reduction of atmospheric fine dust. As a result of evaluation of the allowed emission amount for local sites, site-D required the most reduction, $4.95{\mu}g/m^2{\cdot}S$, based on the atmospheric guideline, $50{\mu}g/m^3$. The theoretical mitigation could decrease the average concentration of PM10 to $42.6{\mu}g/m^3$ for the study field (Donghae waste water treatment plant). Modeling only for site-A emission showed the potential concentration around the residential area of Donghae harbor, $40{\sim}50{\mu}g/m^3$. However, it will rise over $50{\mu}g/m^3$ with the addition of background level. Therefore no more emission would be allowed. Site-B including commercial area and unpaved field required the reduction of $0.11{\mu}g/m^2{\cdot}S$ due to vehicles and fugitive dust. Site-C and E did not emit additional pollutants.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.313-313
• /
• 2011

오염물질은 배출원의 형태에 따라 점오염물질과 비점오염물질로 구분하고 있고 점오염물질은 생활하수, 산업폐수, 축산폐수, 환경기초시설 방류수 등으로 발생원이 명확하고 수집하여 처리 및 관리가 용이하나 비점오염물질은 배출위치가 명확하지 않으며, 강우 시 일시적으로 대량 배출되는 특징을 가진 농경지, 도로, 대지, 임야 등에서 배출되는 오염물질을 말한다. 우리나라에서 비점오염은 전체 수질오염의 42~67%(2003년)를 차지하는 것으로 나타났고, 2015년에는 전체 수질오염의 65~75%에 이를 것으로 예상되고 있다. 이 중 농업 비점오염원은 총 수질 오염량의 30%이상을 차지할 것으로 추정하고 있으나 이를 저감하기 위한 최적관리방법의 효과검증에 관한 연구는 아직 미미한 상태이다. 이에 본 연구에서는 농경지 중 밭에서 발생하는 비점오염을 저감하기 위한 기법으로 다양한 규모와 형태의 Silt Fence/식생밭두렁/침사구를 설치하여 밭 비점오염에 대한 저감효과를 평가하고 제어대책을 개발하여 최적관리기법을 제시하고 이에 대한 매뉴얼을 개발하기 위한 기초연구를 실시하려 한다. Silt Fence는 주로 건설공사현장에서 홍수유출 발생 시 인접한 하천 및 호소 등으로 유사 및 오염물질이 유입되는 것을 방지하기 위해 임시적으로 설치하는 시설로 합성 직물 필터를 나무나 금속 막대로 연결하여 등고선 방향으로 설치하는 것으로 대상 지역의 토양이 교란되기 전에 그 지역 아래쪽에 설치한다. 식생밭두렁은 밭의 이랑의 길이가 길어질수록 강우 시 빗물이 하단에 이를 때 늘어난 유량과 빠른 유속으로 토양침식이 가중되는데, 이때 30~35m간격으로 식생밭두렁을 설치하게 되면 상부와 하부의 침식정도가 유사한 경향을 보여 식생밭두렁을 설치하지 않은 지역에 비해 토양의 침식정도가 작게 나타나게 된다. 이러한 Silt Fence/식생밭두렁/침사구의 밭 비점오염의 저감효과 평가 및 제어대책 개발을 위한 기초 실험을 수행하기 위해 경상남도 사천시 용현면 선진리 일대에 시험포장을 조성 하였으며, 시험포장내에 6개의 Plot을 만들어 하단부에 포장에서의 유출수의 유량을 측정하기 위해 플룸을 설치하였고 실내실험을 통해 플룸의 수위-유량관계 곡선을 작성하였다. 포장의 토양특성을 판별하기 위해 Plot별로 토양시료를 채취하여 특성을 분석 한 결과 6개 Plot모두 모래함량이 많은 점토질 사질토로 분류되었다. 향후 강우 시 시험포장에서 발생하는 유출수의 수질을 분석하고 Silt Fence/식생밭두렁/침사구의 오염물질 저감효과를 분석하여 제어대책을 개발하게 되면 농업수자원확보를 위한 관리방안 선정을 위한 정책수립에 활용될 수 있으며 비점오염 배출을 최소화시켜 수질의 개선에 기여할 뿐만 아니라 우리나라 농업에 적합한 최적영농관리기술을 개발 할 수 있을 것으로 사료된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.480-486
• /
• 2020

The National Registered Cultural Heritage no. 377, 'The Eclectic-style House in Daeheung-dong, Daejeon', was relocated in 2013, even though it was privately owned. The relocation of National Registered Cultural Heritage through an urban redevelopment project is rare because the restriction of the preservation of a cultural asset is relatively tolerated. For the sake of profit in a redevelopment project, a privately owned Registered Cultural Heritage is likely to be demolished with no laws to prevent it. This study researched the history of the heritage and the procedure of the relocation process. Based on the research, the study intends to clarify the relationship between the economic and legislative conditions with the result of the National Registered Cultural Heritage relocation in general. The failure of the successful relocation of the National Registered Cultural Heritage in redevelopment projects is caused mainly by a change of ownership, which is generally from personal to anonymous associations. Based on the condition, this study maintained the Cultural Heritage's redefinition as a public asset and proposed phased amendments in each major procedure of a redevelopment project for the successful preservation and reuse of National Registered Cultural Heritage.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.46-56
• /
• 2018

This paper aimed to identify main factors of community characters, which have an effect on the land surface temperature(LST) change and estimate the impacting coefficient(ratio) of factors in a significant level of statistics. Chungcheongbuk-do province was selected and then partitioned into city and county areas for the sake of convenience of modeling. LST time series data and the community character data were developed based on Terra Satellite MODIS data and collected from the National Statistical Office, respectively. By the cause and effect relationship between community characters and LST, regression coefficients were estimated using a penal model. In a panel modeling, LST and community characters were used as a dependent variable and explanatory variables, respectively. Panel modeling analysis was carried out using statistical package STATA14 and one-way fixed effect model was selected as the most suitable model to evaluate the regression coefficients in the study area. The impacting ratio of LST change by any explanatory variable derived from the regression coefficients of the panel model fixed. Impacting ratios for industrial areas, elevation ${\times}$ building, energy usage, average window speed, non-urban management area, agricultural, nature and environmental conservation, average precipitation were 3.746, 2.856, 2.742, 0.553, 0.102, 0.071 and 0.003, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.545-553
• /
• 2009

Digital Elevation Models (DEM) is widely used in establishing the topographic profile in nation spatial information. Aerial Light Detection And Ranging (LiDAR) system is one of the well-known means to produce DEM. The system has fast data acquisition procedures and less weather-dependent restrictions compared to photogrammetric approaches. In this regards, LiDAR has been widely utilized and accepted in the process of nation spatial information generation due to its sufficient positional accuracy. However, the investigation of the accuracy of aerial LiDAR data over the area of forestation with various kinds of vegetations has been barely implemented in Korea. Hence, this research focuses on the investigation of the accuracy of aerial LiDAR data over the area of forestation and the evaluation of the acquired accuracy according to the characteristics of the vegetations. The study areas include land with shrubs and its adjacent forest area with mixed tree species. The spots for the investigation have been selected to be well-distributed over the whole study areas and their coordinates are surveyed by Global Positioning Systems (GPS). Then, the surveyed information and aerial LiDAR data have been compared with each other and the result accuracy has been evaluated. Conclusively, it is recommended that LiDAR data collection to be conducted after defoliation period, especially over the areas with broadleaf trees due to the possibility of significant outliers.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.4
• /
• pp.331-342
• /
• 2013

동아프리카 열곡대는 아라비아반도와 아프리카 북동부의 경계에서 부채꼴 형태로 남쪽으로 뻗은 대단층 함몰지구대이다. 아프리카 판 내부에 발달한 열곡대의 폭은 35~60 km이며 연장은 약 4,000km로 알려져 있다. 열곡대는 에티오피아에서 남서방향으로 발달하다 에티오피아 남부에서 동, 서 및 남서 열곡대로 나누어진다. 이 열곡대는 제3기초 올리고세(30~35 Ma)부터 에티오피아 북부 아파르 침강대를 중심으로 주 에티오피아 열곡대가 형성되고, 남쪽으로 확장되면서 마이오세에 활성화된다. 서부 열곡대는 동아프리카대지의 가장자리와 빅토리아 호의 서편을 따라 발달하며, 고각의 정단층에 의해 특징되는 전형적인 반지구대이다. 동부 열곡대(주 에티오피아 열곡대와 케냐 열곡대)는 30 Ma 전 화산활동과 지구조활동이 시작되었으나, 서부 열곡대는 Albert 호 북부에서 12 Ma 전에, Tanganyika 열곡에서는 7 Ma 전부터 시작되었다. 서부 열곡대의 남서 방향으로 분기된 남서 열곡대는 DR-콩고 남부와 잠비아의 Tanganyika 호에서부터 남서 방향으로 확장되어 보츠와나 Okavango 열곡대와 연결된다. 주 에티오피아 열곡대(MER)의 화산암류와 관련 퇴적암류는 지열, 소다회, 포타쉬(K), 천열수 금, 벤토나이트, 유황 및 부석자원으로 중요한 관련암으로 역할을 한다. 열곡관련 대표적인 광상으로는 Afar 열곡대에 분포하는 Danakhil K-광상과 Megenta 및 Blackrock 천열수 금광상이다. Danakhil K-광상은 제4기 화산활동과 높은 지열류에 의해 열곡대 내 분포하던 소금 선상지(salt fan)에서 증발작용에 의해 형성된 증발형 K-광상으로서 총 자원량은 약 12.6억톤으로 평가되었다. 이 광상에서는 4종의 K-광물인 실바이트, 카날라이트, 포리하라이트, 카이나이트가 산출한다. 아파르 침강대 내 분포하는 대표적인 천열수 금광상은 텐다호 지구대에 위치하는 Megenta 및 Blackrock 광상이다. 제4기에 EMR에서 산성의 과알칼리 화산활동에 의해 열수활동이 초래되어 현재까지도 활동하여 지열대가 형성되고, 저유황형금 광상들이 형성되었다. Megenta 저유황형 금 광상은 2009년 발견되었으며, 현재 영국의 Startex International사에 의해 탐사가 진행 중이다. 지금까지의 탐사 결과 옥수질 규화 변질암 분포지에서 5개의 광체가 분포하며, 그중 Hyena 광체에서는 규화 변질된 열수각력암에서 최고 16.75 g/t의 금 품위가 보고되었다. 동아프리카 열곡대의 서편인 부룬디에 분포하는 Gakara REE 광상은 카보너타이트 유형의 REE 광상이다. 이 광상은 $400km^2$ 면적 내 수 cm부터 수 m까지의 폭을 가지는 맥상 또는 망상세맥상의 광체를 형성한다. 주로 조립의 바스트너사이트와 모나자이트로 구성된다. 바스트너사이트의 형성시기는 $587{\pm}4Ma$인 신원생대로 알려져 있으며, 이 지역에 분포하는 카보너타이트와 알칼리암들이 신원생대에서 신생대까지의 광범위한 연대를 보이는 것은 동일한 구조선을 따라서 일어나는 반복되는 열곡활동으로 해석된다. 또한 REE, U, 인회석 자원의 관련암체로 생각되는 알카리 조면암(네펠린-조면암 포함)과 카보너타이트는 동아프리카 열곡대의 남동부 끝자락인 말라위와 모잠비크에 우세하게 분포한다.