• The Magazine of the IEIE
• /
• v.28 no.2
• /
• pp.90-104
• /
• 2001

최근까지 동물 또는 사람이 극저주파 전자기장에 평생 또는 여러 세대에 걸쳐 노출되었을 경우, 나타나는 생체영향에 관한 연구는 거의 없다. 본 연구에서는 마우스에 60Hz 전자파를 1세대부터 3세대까지 지속적으로 노출시켜 나타나는 영향을 실험하였다. 실험동물은 5주령인 BALB/c 마우스를 1주일간 적응시킨 후 사용하였다. 실험군은 5kV/m, 30kV/m, 0.5mT 그리고 1.5mT의 4개군으로 나누었으며, 대조군은 1군으로 실험하였다. 생후 6주부터는 위에서 정해진 양의 전자파를 20-22주간 지속적으로 실험동물에 조사하고 동일조건의 암수 마우스를 교미시켰으며, 임신 후에도 사망 또는 부검시까지 동일한 조건으로 계속 조사하였다. 2세대와 3세대는 임신적부터 사망 또는 부검시까지 동일한 조건으로 계속 조사하였다. 1, 2 그리고 3세대 마우스들은 질병에 의한 사망 직전 또는 생후 46주, 66주 그리고 생후 49주에 부검한 뒤, 혈액학적 및 생화학적 검사 그리고 조직병리학적 검사를 실시하였다. 2세대 태아에서는 조기사망(early fetal death), 성장기사망(late fetal death) 그리고 뇌노출(excencephaly) 및 선천성 심장기형을 포함하는 선천이상이 발견되었는데, 이는 대조군에 비해 2-4배 높았다. 1, 2세대에서는 생식기인 고환(testis)과 난소(ovary)의 무게가 감소하였으나 2세대에서는 아무런 변화를 보이지 않았다. 실험군인 30kV/m, 0.5mT 그리고 1.5mT 전 실험군인 30kV/m, 0.5mT 그리고 1.5mT 전자파에 노출된 1세대와 2세대 마우스에서는 프종(lymphoma), 선암종(adenocarcinoma), 기저상피세포증(basal cell epithelioma), 편평상 피두유종(squamous papilloma) 그리고 선종(adenoma) 등이 발견되었으나, 3세대에서는 발견되지 않았다. 60Hz 전자파는 태아 및 생식기에 영향을 미치고, 또한 종양을 유발할 가능성이 있다. 그러나 3세대는 전자파 환경에 점차 적응을 하는 것으로 보인다. 그러나 몇몇 국제기구에서 정하여 놓은 안전한계치의 전자파가 생체에 장기간 노출되었을 경우에 나타날 수 있는 생체영향을 확인하기 위해서는 많은 연구가 필요하다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.195-205
• /
• 2001

This Paper describes a numerical method to evaluate the flexural strength of reinforced concrete members exposed to fire. An analytical method is developed for the moment-curvature relationship for the cross section which is subjected to high temperature. The method performs heat-transfer analysis for the cross sections and subsequently performs numerical analysis using the stress-strain relationships of concrete and reinforcing steel in various heat conditions. The results of the numerical studies are ; 1) the residual flexural strength exposing at high temperature is affected by the heating time, the depth of concrete cover and reinforcement ratio, 2) the residual flexural strength after exposed at high temperature is recovered of its original strength at minimum ratio of reinforcement, while members having half of maximum ratio and maximum ratio of reinforcement do not recover its original strength, 3) furthermore, the concrete may reach its maximum capacity before reinforcement yields in reinforced concrete members having maximum ratio of reinforcement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.866-869
• /
• 2015

With the advance in semiconductor technology, the number of elements that can be integrated in system-on-chip(SoC) increases exponentially, and thus voltage scaling is indispensable to enhance energy efficiency. Near-threshold voltage computing(NTC) improves the energy efficiency by an order of degree, hence it is able to overcome the limitation of conventional super-threshold voltage computing(STC). Although NTC-based low performance manycore system can be used to maximize energy efficiency, it demands more number of cores to sustain the performance, which results in considerable increase of area. In this paper, we analyze NTC manycore architecture considering the trade-offs between performance, power, and area. Therefore, we propose an algorithmic methodology that can optimize power consumption and area while satisfying the required performance by determining the constrained number of cores and size of caches and clusters in NTC environment. Experimental results show that proposed NTC architecture can reduce power consumption by approximately 16.5 % while maintaining the performance of STC core under area constraint.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.536-542
• /
• 2017

A great deal of difficulty is encountered in the thermo-mechanical analyses of nozzle assembly for solid propellant rocket motors. The main issue in this paper is the modeling of the boundary conditions and the connections between the various components-gaps, relative movements of the components, contacts, friction, etc. This paper evaluated the complex phenomena of nozzle assembly during burning time with co-simulation which include fluid, thermal surface reaction/ablation and structural analysis. The validity of this approach was verified by comparison of analysis results with measured strains.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.466-473
• /
• 2014

Recently, there is has been significant interest in the allocation systems of rail track capacities with considerations of the multiple train operating companies. The system indicates both a well-defined procedure and an algorithmic method to allocate the rail track capacities. Among them, this study considers the algorithmic method to derive the optimal timetable for the trains, which the companies propose together with their arrival and departure times at each station. However, most studies have focused on the adjustment of the departure and arrival times without conflicts, which could result in incompatible allocations with the line plan, which would result in an insufficient number of trains on each line to satisfy the demands. Our study presents a new optimization model and algorithm for the allocation problem in order to reflect the predetermined line plan. Furthermore, we provide the experimental results that were applied to the Korean high-speed railway network including the Suseo lines.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.649-653
• /
• 2010

일반적으로 계획 또는 설계 단계에서 수행되고 있는 관거 시설의 수리계산에는 연결관 내에서의 마찰손실만을 감안하여 수행하고 있으며, 맨홀에서의 에너지 손실은 고려되지 않는 실정이다. 그러나 연결관 내부와 맨홀의 내부는 여러 가지 수리학적 조건이 다르므로 에너지 손실이 발생하게 된다. 더욱이 직선으로 연결된 중간맨홀보다 두 개의 유입관과 한 개의 유출관으로 구성된 합류맨홀은 연결 구조상 유수교란에 의한 에너지 손실이 커질 것으로 예상됨에도 불구하고 현재 실무에서 우수 배수시설의 설계 시 직선 연결맨홀과 합류맨홀의 손실을 구별하지 않고 사용하고 있는 실정이다. 그러므로 합류맨홀에서 우수 관거 시스템의 우수 배제 능력을 증가시켜 도심지의 침수를 방지하기 위한 관거시설의 적정 설계 기준이 필요하며, 합리적인 설계 기준을 제시하기 위하여 합류 맨홀 내에서의 수두 손실을 분석할 필요가 있다. 본 연구에서는 수리 모형 실험의 물질적, 시간적 한계를 극복하기 위하여 일반적으로 3차원 유체거동의 특성분석에 많이 사용되는 Fluent 6.3 모형을 이용하여 과부하 합류 맨홀에서의 흐름특성을 수치모의 하였으며, 맨홀 내 손실수두의 변화를 계산하여 손실계수를 산정하였다. 계산된 손실계수는 수리모형 실험을 통하여 산정된 손실계수와 비교하였다. 또한 동일한 수치모의 해석 조건을 실제 합류맨홀에 적용하여 실제 합류 맨홀의 규모 변화에 따른 손실계수를 산정하였다. 수치모형의 적용 결과 맨홀 내에서의 유속변화, 수심변화 및 압력변화에 대해서는 수리모형 실험 결과와 유사한 경향을 나타내고 있으며, 수치모형에 의하여 산정된 합류 맨홀에서의 손실계수 값과 수리모형에 의하여 산정된 손실계수 값이 거의 유사하게 나타났다. 또한 동일한 수치모의 해석 조건을 실제 합류맨홀에 적용하여 합류맨홀의 규모 변화에 따른 손실계수를 산정하였으며, 산정된 손실계수는 우수관거 시스템의 설계 및 평가에 사용가능하리라 판단된다.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.197-204
• /
• 1993

Abstract The effects of the hole size and the specimen width on the fracture behavior of several fabric composite plates are experimentally investigated in tension. Tests are performed on plain woven glass/ epoxy, plain woven carbon/epoxy and satin woven glass/polyester specimens with a circular hole. It is shown in this paper that the characteristic length according to the point stress criterion depends on the hole size and the specimen width. An excellent agreement is found between the experimental results and the analytical predictions of the modified failure criterion. The notched strength increase with an increase in the damage ratio, which is explained by a stress relaxation due to the formation of damage zone. When the unstable fracture occurred, the critical crack length equivalent for the damage zone is about twice the characteristic length. The critical energy release rate $G_c$ is independent of hole size for the same specimen width. The variation of $G_c$ according to the material system, fiber volume fraction and specimen width relates to the notch sensitivity factor. $G_c$ increases with a decrease in the notch sensitivity factor, which can be explained by a stress relaxation due to the increase of damage zone.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.239-245
• /
• 2002

In this Paper, we present a method for designing fuzzy $H_2/H_{\infty}$ controllers of delayed nonlinear systems with saturating input. Takagi-Sugeno fuzzy model is employed to represent delayed nonlinear systems with saturating input. The fuzzy control systems utilize the concept of the so-called parallel distributed compensation(PDC). Using a single quadratic Lyapunov function, the globally exponential stability and $H_2/H_{\infty}$ performance problem are discussed. And a sufficient condition for the existence of fuzzy $H_2/H_{\infty}$ controllers is given in terms of linear matrix inequalities(LMIs). The designing fuzzy $H_2/H_{\infty}$ controllers minimize an upper bound on a linear quadratic performance measure. Finally, a design example of fuzzy $H_2/H_{\infty}$ controller for uncertain delayed nonlinear systems with saturating input.

• The Journal of the Korea Contents Association
• /
• v.17 no.5
• /
• pp.388-409
• /
• 2017

This study was to explore experiences of Female Ex-offender's re-entry process to socialization. For this, 9 female ex-offenders who receive housing support by the Korea Rehabilitation Agency were interviewed and the Strauss and Corbin's ground theory is used to approach to the data. In open coding, 88 concepts, 33 subcategories, and 15categories emerged from the data. In axial coding, central phenomenon were 'indulge in self pity', 'being isolated female ex-offender'. Intervention condition was 'human cooperation system'. Strategies were 'increase the receptiveness', 'establish the foundation'. Consequences were 'finding the stability in the life', 'changing the life direction'. In selective coding, main theme was 'overcome social stigma through changing life-direction and acclimate to society', and four phases were derived from the data. Based upon this results outcome, need of female ex-offender in the process of social transition and their experience were discussed.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.1022-1030
• /
• 2015

The context-awareness of mobile applications yields several issues for testing, since mobile applications should be able to be tested in any environment and under any contextual input. In previous studies of testing for Android applications as an event-driven system, many researchers have focused on using generated test cases considering only Graphical User Interface (GUI) events. However, it is difficult to find failures that could be detected when considering the changes in the context in which applications run. It is even more important to consider various contexts since the mobile applications adapt and use the new features and sensors of mobile devices. In this paper, we provide a method of systematically generating various executing contexts from permissions. By referring to the lists of permissions, the resources used by the applications for running Android applications can be easily inferred. To evaluate the efficiency of our testing method, we applied the method on two open source projects and showed that it contributes to improve the statement code coverage.