• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.3
• /
• pp.97-106
• /
• 2015

Thermal deformation of packaging materials was observed in some ready-to-eat food products for microwave use. Therefore, the deformation patterns depending on packaging types and shapes of 9 domestic and 11 foreign products after microwave heating were investigated. Among the domestic and foreign products, thermal deformations of packaging material were observed in 5 and 8 samples, respectively. Besides, thermal deformation occurred on the lid and cup body of tray filled with a spicy chicken sauce after having microwaved where previously no deformation had been observed with other food types. No consistent results of thermal deformation were obtained by the analysis of salinity, brix, pH and viscosity of RTE products for microwave heating. However, thermal deformations of packages were less found in the packages used for the RTE foods contained very high or low viscosity than those with medium viscosity. Furthermore, the degree of thermal deformations was dependent on the food composition and shape as well as package type. In order to prevent the thermal deformation of packaging materials, therefore, technological advances and further studies are required to develop the heat-resistant packaging system and to improve the non-uniformity during microwave heating of RTE foods.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.91-100
• /
• 2008

The quality of service on urban roadways have been evaluated mainly based on such quantitative measures as travel speed and delay. However, in addition to the quantitative aspects, drivers traveling on urban roadways are subject to be influenced by qualitative measures such as aesthetic aspects of the roadway and other drivers' violation of traffic laws. Based on this notion, this study attempts to identify roadway service quality indices, considering both qualitative and quantitative aspects and evaluate the quality of service using the modified Importance-Performance Analysis (IPA), a technique often applied in the field of marketing. The modified IPA is proposed in this study as a way to evaluate the service quality, reflecting the relative performance between study areas and performance indices. A case study is implemented over the Gangnam and Gangbuk areas in Seoul, resulting in identifying the items needed to be improved for each study area.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.18 no.1_2
• /
• pp.33-38
• /
• 2012

Modified atmosphere packaging (MAP) was applied to steamed bread added with black rice in 10%. In terms of storage stability, the steamed bread was found to be susceptible to microbial spoilage and could be helped in its preservation and shelf life extension by MAP. According to microbial and sensory quality criteria, the product shelf life was determined as < 5 days for air package, 5 days for 100% $N_2$ package, 8 days for package of 60% $CO_2$/40% $N_2$, and 15 days for 100% $CO_2$ package. Even though MAP condition with $CO_2$ inclusion was effective in extending the shelf life based on microbial quality, it did not affect the staling of the bread.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.375-380
• /
• 2007

The nonlinear aerodynamic analysis of wing with control surface is performed using the frequency-domain panel method. To take into consideration the nonlinear aerodynamic characteristics of wing an iterative decambering approach is introduced. The iterative decambering approach uses the known aerodynamic characteristics of airfoil to calculate the aerodynamic characteristics of wing. The multi-dimensional Newton iteration is used to account for the coupling between the different sections of wing. The present method is verified by showing that it produces results that are in good agreement with experiments. The present method will be useful for the analysis of aircraft in the conceptual design because the present method can calculate promptly the nonlinear aerodynamic characteristics of wing with a few computing resources.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.1
• /
• pp.39-45
• /
• 2003

The most important part in the earth reinforcement is the interface between soil and the reinforcement. Shear strength and shear behavior in this interface make a great role relating to the reinforcement effect. This paper presents 2 kinds of direct shear test methods. one is the strain free shear test, called 'free method', that is performed by the free condition of allowing tensile strain. The other is the strain fix shear test, called 'fixed method', that is performed by the fixed condition of not allowing tensile strain. Two reinforcements were used such as nonwoven geotextile and geogrid. That is, interfaces are composed of geogrid/sand and geotextile/sand. From the test results it shows us that the fixed method had a greater friction angle and a smaller peak shear strain than those of the free method. Residual stress of the fixed method was bigger than that of the free method but the residual stress ratio was vice versa.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.706-712
• /
• 2014

This paper describes a determining method of weighting factors for two-point interpolation filters. The interpolation filters is implemented by applying modifying functions to the linear interpolation. Here, there is a problem of determining weights when modifying functions being engaged. The previous method determined the weights by imposing c1-continuity on the interpolation kernels. However, this approach is unable to use the property of individual modifying functions. In this paper, on the basis of spectral analyses of the modifying functions and image signals, we provide a determination method by experimental results. Thus, many experiments are carried out to do so. The results indicate that different weights are required for different modifying functions and also the proposed method outperforms than the previous method.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.5
• /
• pp.411-420
• /
• 2010

In general, moving vehicles generate continuous and repetitive strain of energy on bridges. The strain energy can convert to electric energy due to its piezoelectric element. However, some factors should be considered in order to reasonably assess the feasibility such as load distribution applied on bridges and the relationship of strains generated according to loads. This study was carried out to estimate the generated voltage when piezoelectric elements were installed to a bridge. A steel-concrete composite specimen was fabricated and loads were applied, considering vehicle load-effects. As a result, the voltage generated in the element was evaluated and compared with the analysis equation of the piezoelectric effect.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.474-479
• /
• 2006

컴퓨터 기술이 발전함에 따라 3 차원 입력시스템을 통한 모델링이 가능하게 되었다. 2 차원 시스템은 평면 입력을 공간상의 데이터로 바꾸기 위한 많은 기능과 메뉴들이 존재하지만 3 차원 시스템에서는 그러한 복잡한 기능 없이 입력 데이터가 곧바로 모델링에 적용될 수 있다. 하지만 아직까지 3 차원 입력시스템에서 모델링을 수행하는 디자이너에게 익숙한 스케치 방법을 고려하지 못하고 있는 실정이다. 디자이너에게 가장 익숙한 모델링 방법은 스케치북에 선으로 그림을 그리는 것이기 때문에, 모델을 변형하는 방법은 이를 벗어나지 않도록 해야 한다. 평면 스케치에서 디자이너가 그리는 선은 모델의 윤곽을 잡아주고 모델의 특징이 되는 부분을 표현하게 된다. 이러한 선의 입력을 통한 스케치를 3 차원 모델링에서 그대로 사용하기 위해서는 공간에서의 점이나 면이 아닌 선의 입력을 모델링에 적용할 수 있어야 한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.532-535
• /
• 2004

현재 국내 초고속 인터넷 인프라는 세계 최고 수준으로 xDSL 계열의 디지털 가입자 회선과 HFC(Hybrid Fiber Coxial) 망을 활용한 케이블 모뎀이 시장을 거의 차지하고 치열한 경쟁을 보이고 있다. 하지만 서비스 가입자 수준은 거의 포화점에 다다른 것으로 보이며 앞으로 속도를 비롯한 품질 면에서 진보된 차세대 인터넷 접속 서비스 구축을 계획하고 있다. NGN은 유무선 통합을 통한 다양한 서비스를 제공을 목표로 정부나 기업에서 추진 중은 차세대 통합 정보통신 인프라이다. 이 NGN을 실현시킬 수 있는 가입자 망 기술로서는 FTTH가 유력하게 거론되고 있다. 본 연구에서는 초고속 인터넷 서비스 수요에 대한 체계적인 분석을 통하여 NGN 서비스 특성을 반영하는 적절한 예측 모형을 제시하였다. FTTH 가입자 수요를 예측하기 위해 본 논문에서는 Bass 모형의 변형인 변형된 공존 Bass 모형을 이용하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.473-476
• /
• 2011

최근 3D영화의 흥행과 더불어 3D 영상제작 기술들이 높은 관심을 받고 있다. 변이 정보를 획득하기 위한, 스테레오 매칭에 관한 분야는 꾸준히 연구가 되고 있는 분야이다. 그 중에서도 지역적 방법은 구현의 용이성과 낮은 계산복잡도로 인하여 많은 연구가 진행되고 있다. 하지만 대부분의 지역적 방법들은 영상이 외부환경에 변형되었을 때의 경우를 고려하지 않고 있기 때문에, 외부환경에 의해 많이 변형된 영상에 대해서는 제대로 된 변이 정보를 추출해내지 못한다. 본 논문에서는 양쪽 영상에서 픽셀간의 차이를 이용하여 서로 대응되는 영역을 찾는 스테레오 매칭 기법을 제안한다. 제안하는 기법은 조명과 같은 외부요소에 강인한 특징을 가진다. 이 기법은 전 처리나 후처리 과정에서 부가적인 작업의 수행 없이 기법 자체만으로 외부요소에 대한 보상을 실행한다는 면에서 장점을 가진다. 다양한 영상에서 변이를 추출하는 실험 결과, 단계적 조명 변화에 대해서도 대조군 방법과 비교하여 균일한 변이 영상을 획득할 수 있었다.