• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.39-43
• /
• 2017

Purpose Thyroglobulin (Tg) is a biologic marker of differentiated thyroid carcinoma (DTC), produced by normal thyroid tissue or thyroid cancer tissue. Therefore, the Tg values of DTC patients is the most specific indicator for judging whether recurrence occur or whether the remaining thyroid cancer is present. Thyroid cancer is currently the most common cancer in Korea, of which 90% is differentiated thyroid cancer. The number of patients with thyroid disease of this application also increased, and an accurate and prompt results are required. However, the incubation time of the Tg commonly takes about 24 hours in our hospital, and the result reporting time is delayed, and We could not satisfied with the requirements of clinical departments and patients. In order to fulfill these requirements, experiments were conducted by shortening the incubation time between company B's Kit currently in use and company C's Kit used in other hospitals. Through these experiments, we could perform the correlation with the original method and shortening method, and could find the optimum reaction time to satisfy the needs of the departments and the patients, and we will improve the competitiveness with the EIA examination. Materials and Methods In September 2016, we tested 65 patients company B's kit and company C's kit by three incubation ways. First method $37^{\circ}C$ shaking 2hr/2hr, Second method RT shaking 3hr/2hr, Third method 1hr/1hr shaking at $37^{\circ}C$. Fourth method RT shaking 3hr method which is the original method of Company C's Kit. Fifth method, the incubation time was shortened under room temperature shaking 2hr, Sixth method $37^{\circ}C$ shaking 2hr. And we performed and compared the correlation and coefficient of each methods. Results As a result of performing shortening method on company B currently in use, when comparing the Original method of company B kit, First method $37^{\circ}C$ shaking 2hr/2hr was less than Tg 1.0 ng/mL and the ratio of $R^2=0.5906$, above 1.0 ng/mL In the value, $R^2=0.9597$. Second method RT shaking 3hr/2hr was $R^2=0.7262$ less than value of 1.0 ng/mL, $R^2=0.9566$ above than value of 1.0 ng/mL. Third method $37^{\circ}C$ shaking 1hr/1hr was $R^2=0.7728$ less than value of 1.0 ng/mL, $R^2=0.8904$ above than value of 1.0 ng/mL. Forth, Company C's The original method, RT shaking 3hr was $R^2=0.7542$ less than value of 1.0 ng/mL, and $R^2=0.9711$ above than value of 1.0 ng/mL. Fifth method RT shaking 2hr was $R^2=0.5477$ less than value of 1.0 ng/mL, $R^2=0.9231$ above than value of 1.0 ng/mL. Sixth method $37^{\circ}C$ shaking 2hr showed $R^2=0.2848$ less than value of 1.0 ng/mL, $R^2=0.9028$ above than value of 1.0 ng/mL. Conclusion Samples with both values of 1.0 ng/mL or higher in both of the six methods showed relatively high correlation, but the correlation was relatively low less than value of 1.0 ng/mL. Especially, the $37^{\circ}C$ shaking 2hr method of company C showed a sharp fluctuation from the low concentration value of 1.0 ng/mL or less. Therefore, we are planning to continuously test the time, equipment, incubation temperature and so on for the room temperature shaking 2hr method and $37^{\circ}C$ shaking 1hr/1hr of company C which showed a relatively high correlation. After that, we can search for an appropriate shortening method through additional experiments such as recovery test, dilution test, sensitivity test, and provide more accurate and prompt results to the department of medical treatment, It is competitive with EIA test.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.271-279
• /
• 1989

Mean values representing the particle size distribution and some chemical properties for the cultivated soils were obtained from the analysis results of the typical profiles, which were described by the detailed soil maps throughout Korea. Analysis results of 5,215 soil samples (3,075 for paddy and 2,140 for upland) were available for the determination of mean values. The results are under. 1. Paddy topsoil contained 20.4% for clay, 5.8 for pH, 2.6% for organic matter, 10.4me/100g for exchangeable K, and 89ppm for available $P_2O_5$. Upland topsoil did 17.3% for clay, 5.5 for pH, 1.8% for organic matter, 9.lme/100g for CEC, 0.29me/100g for exchangeable K, and 103ppm for availabal $P_2O_5$. 2. Soil properies for paddy were markedly influenced by the reliefs. Topsoil contained 21.4% for clay, 6.0 for pH, 2.2% for organic matter, 10.8me/100g for CEC, 0.39me/100g for exchang-cable K and 57ppm for available $P_2O_5$ on the fluvio-marine plain, 15.3%, 5.7, 2.0%, 8.6me/100g, 0.17me/100g and 76ppm on the alluvial plain, 18.8%, 5.9, 2.7%, 10.4me/100g, 0.19me/100g and 80ppm on the valleys and fans, 25.0%, 5.7, 2.5%, 11.5me/100g, 0.26me/100g, 0.27me/100g and 141ppm on the moutain foot slopes, respectively. 3. Soil Properties for upland, also, were markedly influenced by the reliefs. Topsoil contained 5.5% for clay, 5.7 for pH, 1.1% for organic matter, 4.7me/100g for CEC, 0.17me/100g for exchangeable K and 50ppm for available $P_2O_5$ on the fluvio-marine plain, 10.3%, 5.5, 1.4%, 7.6me/100g, 0.26me/100g and 160ppm on the alluvial plain, 13.9%, 5.4, 1.8%, 9.3me/100g, 0.24me/100g and and 184ppm on the valleys and fans, 29.8%, 5.3, 2.1%, 11.2me/100g 0.40me/100g and 58ppm on the alluvial plain, 20.0%, 5.7, 2.7%, 11.4me/100g, 0.32me/100g and 116ppm on the mountain foot slopes, and 24.6%, 5.3, 1.8%, 10.2me/100g, 0.28me/100g and 51ppm on the rolling and Hill. 4. All chemical properties did not reach the ideal value for maximizing land capability. 5. Organic matter, exchangeable cations and available $P_2O_5$ were not normally distributed. Intervals of one and two standard deviations about mean of an approximately normal distribution were calculated.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2019

Purpose: Helmet type bolus for 3D printer is being manufactured because of the disadvantages of Bolus materials when photon beam is used for the treatment of scalp malignancy. However, PLA, which is a used material, has a higher density than a tissue equivalent material and inconveniences occur when the patient wears PLA. In this study, we try to treat malignant scalp tumors by using M3 wax helmet with 3D printer. Methods and materials: For the modeling of the helmet type M3 wax, the head phantom was photographed by CT, which was acquired with a DICOM file. The part for helmet on the scalp was made with Helmet contour. The M3 Wax helmet was made by dissolving paraffin wax, mixing magnesium oxide and calcium carbonate, solidifying it in a PLA 3D helmet, and then eliminated PLA 3D Helmet of the surface. The treatment plan was based on Intensity-Modulated Radiation Therapy (IMRT) of 10 Portals, and the therapeutic dose was 200 cGy, using Analytical Anisotropic Algorithm (AAA) of Eclipse. Then, the dose was verified by using EBT3 film and Mosfet (Metal Oxide Semiconductor Field Effect Transistor: USA), and the IMRT plan was measured 3 times in 3 parts by reproducing the phantom of the head human model under the same condition with the CT simulation room. Results: The Hounsfield unit (HU) of the bolus measured by CT was $52{\pm}37.1$. The dose of TPS was 186.6 cGy, 193.2 cGy and 190.6 cGy at the M3 Wax bolus measurement points of A, B and C, and the dose measured three times at Mostet was $179.66{\pm}2.62cGy$, $184.33{\pm}1.24cGy$ and $195.33{\pm}1.69cGy$. And the error rates were -3.71 %, -4.59 %, and 2.48 %. The dose measured with EBT3 film was $182.00{\pm}1.63cGy$, $193.66{\pm}2.05cGy$ and $196{\pm}2.16cGy$. The error rates were -2.46 %, 0.23 % and 2.83 %. Conclusions: The thickness of the M3 wax bolus was 2 cm, which could help the treatment plan to be established by easily lowering the dose of the brain part. The maximum error rate of the scalp surface dose was measured within 5 % and generally within 3 %, even in the A, B, C measurements of dosimeters of EBT3 film and Mosfet in the treatment dose verification. The making period of M3 wax bolus is shorter, cheaper than that of 3D printer, can be reused and is very useful for the treatment of scalp malignancies as human tissue equivalent material. Therefore, we think that the use of casting type M3 wax bolus, which will complement the making period and cost of high capacity Bolus and Compensator in 3D printer, will increase later.

• The Korean Journal of Archival Studies
• /
• no.32
• /
• pp.127-176
• /
• 2012

Metadata is well recognized as one of the foundational factors in archiving and long-term preservation of digital resources. There are several metadata standards for records management, archives and preservation, e.g. ISAD(G), EAD, AGRkMs, PREMIS, and OAIS. Consideration is important in selecting appropriate metadata standards in order to design metadata schema that meet the requirements of a particular archival system. Interoperability of metadata with other systems should be considered in schema design. In our previous research, we have presented a feature analysis of metadata standards by identifying the primary resource lifecycle stages where each standard is applied. We have clarified that any single metadata standard cannot cover the whole records lifecycle for archiving and preservation. Through this feature analysis, we analyzed the features of metadata in the whole records lifecycle, and we clarified the relationships between the metadata standards and the stages of the lifecycle. In the previous study, more detailed analysis was left for future study. This paper proposes to analyze the metadata schemas from the viewpoint of tasks performed in the lifecycle. Metadata schemas are primarily defined to describe properties of a resource in accordance with the purposes of description, e.g. finding aids, records management, preservation and so forth. In other words, the metadata standards are resource- and purpose-centric, and the resource lifecycle is not explicitly reflected in the standards. There are no systematic methods for mapping between different metadata standards in accordance with the lifecycle. This paper proposes a method for mapping between metadata standards based on the tasks contained in the resource lifecycle. We first propose a Task Model to clarify tasks applied to resources in each stage of the lifecycle. This model is created as a task-centric model to identify features of metadata standards and to create mappings among elements of those standards. It is important to categorize the elements in order to limit the semantic scope of mapping among elements and decrease the number of combinations of elements for mapping. This paper proposes to use 5W1H (Who, What, Why, When, Where, How) model to categorize the elements. 5W1H categories are generally used for describing events, e.g. news articles. As performing a task on a resource causes an event and metadata elements are used in the event, we consider that the 5W1H categories are adequate to categorize the elements. By using these categories, we determine the features of every element of metadata standards which are AGLS, AGRkMS, PREMIS, EAD, OAIS and an attribute set extracted from DPC decision flow. Then, we perform the element mapping between the standards, and find the relationships between the standards. In this study, we defined a set of terms for each of 5W1H categories, which typically appear in the definition of an element, and used those terms to categorize the elements. For example, if the definition of an element includes the terms such as person and organization that mean a subject which contribute to create, modify a resource the element is categorized into the Who category. A single element can be categorized into one or more 5W1H categories. Thus, we categorized every element of the metadata standards using the 5W1H model, and then, we carried out mapping among the elements in each category. We conclude that the Task Model provides a new viewpoint for metadata schemas and is useful to help us understand the features of metadata standards for records management and archives. The 5W1H model, which is defined based on the Task Model, provides us a core set of categories to semantically classify metadata elements from the viewpoint of an event caused by a task.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.143-156
• /
• 2005

Background: The best dose-fractionation regimen of the definitive radiotherapy for cervix cancer remains to be clearly determined. It seems to be partially attributed to the complexity of the affecting factors and the lack of detailed information on external and intra-cavitary fractionation. To find optimal practice guidelines, our experiences of the combination of external beam radiotherapy (EBRT) and high-dose-rate intracavitary brachytherapy (HDR-ICBT) were reviewed with detailed information of the various treatment parameters obtained from a large cohort of women treated homogeneously at a single institute. Materials and Methods: The subjects were 743 cervical cancer patients (Stage IB 198, IIA 77, IIB 364, IIIA 7, IIIB 89 and IVA 8) treated by radiotherapy alone, between 1990 and 1996. A total external beam radiotherapy (EBRT) dose of $23.4\~59.4$ Gy (Median 45.0) was delivered to the whole pelvis. High-dose-rate intracavitary brachytherapy (HDR-IBT) was also peformed using various fractionation schemes. A Midline block (MLB) was initiated after the delivery of $14.4\~43.2$ Gy (Median 36.0) of EBRT in 495 patients, while In the other 248 patients EBRT could not be used due to slow tumor regression or the huge initial bulk of tumor. The point A, actual bladder & rectal doses were individually assessed in all patients. The biologically effective dose (BED) to the tumor ($\alpha/\beta$=10) and late-responding tissues ($\alpha/\beta$=3) for both EBRT and HDR-ICBT were calculated. The total BED values to point A, the actual bladder and rectal reference points were the summation of the EBRT and HDR-ICBT. In addition to all the details on dose-fractionation, the other factors (i.e. the overall treatment time, physicians preference) that can affect the schedule of the definitive radiotherapy were also thoroughly analyzed. The association between MD-BED $Gy_3$ and the risk of complication was assessed using serial multiple logistic regression models. The associations between R-BED $Gy_3$ and rectal complications and between V-BED $Gy_3$ and bladder complications were assessed using multiple logistic regression models after adjustment for age, stage, tumor size and treatment duration. Serial Coxs proportional hazard regression models were used to estimate the relative risks of recurrence due to MD-BED $Gy_{10}$, and the treatment duration. Results: The overall complication rate for RTOG Grades $1\~4$ toxicities was $33.1\%$. The 5-year actuarial pelvic control rate for ail 743 patients was $83\%$. The midline cumulative BED dose, which is the sum of external midline BED and HDR-ICBT point A BED, ranged from 62.0 to 121.9 $Gy_{10}$ (median 93.0) for tumors and from 93.6 to 187.3 $Gy_3$ (median 137.6) for late responding tissues. The median cumulative values of actual rectal (R-BED $Gy_3$) and bladder Point BED (V-BED $Gy_3$) were 118.7 $Gy_3$ (range $48.8\~265.2$) and 126.1 $Gy_3$ (range: $54.9\~267.5$), respectively. MD-BED $Gy_3$ showed a good correlation with rectal (p=0.003), but not with bladder complications (p=0.095). R-BED $Gy_3$ had a very strong association (p=<0.0001), and was more predictive of rectal complications than A-BED $Gy_3$. B-BED $Gy_3$ also showed significance in the prediction of bladder complications in a trend test (p=0.0298). No statistically significant dose-response relationship for pelvic control was observed. The Sandwich and Continuous techniques, which differ according to when the ICR was inserted during the EBRT and due to the physicians preference, showed no differences in the local control and complication rates; there were also no differences in the 3 vs. 5 Gy fraction size of HDR-ICBT. Conclusion: The main reasons optimal dose-fractionation guidelines are not easily established is due to the absence of a dose-response relationship for tumor control as a result of the high-dose gradient of HDR-ICBT, individual differences In tumor responses to radiation therapy and the complexity of affecting factors. Therefore, in our opinion, there is a necessity for individualized tailored therapy, along with general guidelines, in the definitive radiation treatment for cervix cancer. This study also demonstrated the strong predictive value of actual rectal and bladder reference dosing therefore, vaginal gauze packing might be very Important. To maintain the BED dose to less than the threshold resulting in complication, early midline shielding, the HDR-ICBT total dose and fractional dose reduction should be considered.

• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.42-49
• /
• 2012

This study was carried out to investigate the toxicity of food Red No.2 in the Sprague-Dawley (SD) female rat for 4 weeks. SD rats were orally administered for 28 days, with dosage of 500, 1,000, 2,000 mg/kg/day. Animals treated with food Red No.2 did not cause any death and show any clinical signs. They did not show any significant changes of body weight, feed uptake and water consumption. There were not significantly different from the control group in urinalysis, hematological, serum biochemical value and histopathological examination. In conclusion, 4 weeks of the repetitive oral medication of food Red No.2 has resulted no alteration of toxicity according to the test materials in the group of female rats with injection of 2,000 mg/kg. Therefore, food Red No.2 was not indicated to have any toxic effect in the SD rats, when it was orally administered below the dosage 2,000 mg/kg/day for 4 weeks.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.2
• /
• pp.533-564
• /
• 1998

In order to know the effect of proliferation and differentiation on edipocyte 3T3-L1 by prescriptions and herbs, Taeyangin(太陽人)'s Okapijangcheok-tang(五加皮壯脊湯) Mihudeungsikjangtang Acanthopanacis Cortex(五加皮) Phragmitis Rhizoma(蘆根) and Taeumin(太陰人)'s Taeumjowi-tang(太陰調胃湯) Cheongsimyonja-tang(淸心蓮子湯) Cheongpaesagan-tang(淸肺瀉肝湯) Galkeunbupyong-tang(葛根浮萍湯) Coicis Semen(薏苡仁) Rhei Undulati Rhizoma(大黃) Mori Cortex(桑白皮) Ulmi Cortex(楡根白皮) Holotrichia Vermiculus Kalopanaxii Cortex(海桐皮) Ephedrae Herba(麻黃) Imperatae Rhizoma(白茅根), were used and had some effects. 1. The proliferation effect of edipocyte 1) At the Taeyangin(太陽人)'s prescriptions and herbs, Okapijangcheok-tang(五加皮壯脊湯) Mihudeungsikjang-tang Acanthopanacis Cortex(五加皮) have a control effect at the boiling water-extract and ethyl alcohol-extract. Phragmitis Rhizoma(蘆根) have a control effect at the ethyl alcohol-extract. 2) At the Taeyangin(太陽人)'s prescriptions and herbs, Taeumjowi-tang(太陰調胃湯) Cheongsimyonja-tang(淸心蓮子湯) Cheongpaesagan-tang(淸肺瀉肝湯) Galkeunbupyong-tang(葛根浮萍湯) have a control effect at the boiling water-extract and ethyl alcohol-extract. Coicis Semen(薏苡仁) Rhei Undulati Rhizoma(大黃) Morl Cortex(桑白皮) Ulmi Cortex(楡根白皮) Kalopanaxii Cortex(海桐皮) · Ephedrae Herba(麻黃) of the boiling water-extract, Holotrichia Vermiculus Kalopanaxii Cortex(海桐皮) of ethyl alcohol-extract have a control effect on edipocytes. Rhei Undulati Rhizoma(大黃) Ulmi Cortex(楡根白皮) Ephedrae Herba(麻黃) of high-density have a cyto-toxicity. 2. The differentiation effect of edipocyte 1) At the Taeyangin(太陽人)'s prescriptions and herbs during the natural differentiation, Phragmitis Rhizoma(蘆根) of the boiling water-extract, Okapijangchek-tang(五加皮壯脊湯) Acanthopanacis Cortex(五加皮) of the ethyl alcohol-extract have a cyto-toxicity on the first-differentiation. 2) At the Taeumin(太陰人)'s prescriptions and herbs during the natural differentiation, Ulmi Cortex (楡根白皮) Kalopanaxii Cortex(海桐皮) of the boiling water-extract have a cyto-toxicity on the first-differentiation. Cheongsimyonja-tang(淸心蓮子湯) Ephedrae Herba(麻黃) of ethyl alcohol-extract have a control effect on the redifferentiation. 3) At the Taeyangin(太陽人)'s prescriptions and herbs on the first-differentiation during the induced differentiation, Acanthopanacis Cortex(五加皮) of ethyl alcohol-extract has a control effect. Okapijangchek-tang(五加皮壯脊湯) Acanthopanacis Cortex(五加皮) Phragmitis Rhizoma(蘆根) of the boiling water-extract have a cyto-toxicity. 4) At the Taeumin(太陰人)'s prescriptions and herbs on the first-differentiation during the induced differentiation, Coicis Semen(薏苡仁) Ephedrae Herba(麻黃) Imperatae Rhizoma(白茅根) of the boiling water-extract and Ephedrae Herba(麻黃) of the ethyl alcohol-extract have a control effect. Kalopanaxii Cortex(海桐皮) of the boiling water-extract and the ethyl alcohol-extract has a cyto-toxicity. Considering this result, the Taeyangin(太陽人) Taeumin(太陰人)'s prescriptions and herbs have a control effect on edipocytes during the proliferation. Acanthopanacis Cortex(五加皮), Coicis Semen(薏苡仁) Ephedrae Herba(麻黃) Imperatae Rhizoma(白茅根) have a control effect on edipocytes during the induced differentiation. In the future, for treating a obesity need a vivo assay and hope this study to help to know the mechanisms of obesity.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.4
• /
• pp.67-80
• /
• 2022

SipWooDo (十牛圖: Painting of Ten Bulls), a Buddhist painting, is a kind of Zen Sect Buddhism painting, which is shown as a mural in many of main halls of Korean Buddhist temples. MokWooDo has been painted since Song Dynasty of China. It paints a cow, a metaphor of mind and a shepherd boy who controls the cow. It comes also with many other types of works such as poetry called GyeSong, HwaWoonSi and etc. That is, it appeared as a pan-cultural phenomenon beyond ideology and nation not limited to Chinese Buddhist ideology of an era. This study, therefore, selects MokWooDo chants that represent Confucianism, Buddhism and Taoism to compare the writing purposes, mind discipline methods and ultimate goals of such chant literatures in order to integrate and comprehend the ideologies of such three schools in the ideologically cultural aspect, which was not fully dealt with in the existing studies. In particular, the study results are: First, the SipWooDo of Buddhist School is classified generally into Bo Myoung's MokWooDo and Kwak Ahm's SimWooDo (尋牛圖: Painting of Searching out a Bull). Zen Sect Buddhism goes toward nirvana through enlightenment. Both MokWooDo and SimWooDo of Buddhist School are the discipline method of JeomSu (漸修: Discipline by Steps). They were made for SuSimJeungDo (修心證道: Enlightenment of Truth by Mind Discipline), which appears different in HwaJe (畫題: Titles on Painting) and GyeSong (偈頌: Poetry Type of Buddhist Chant) between Zen Sect Buddhism and Doctrine Study Based Buddhism, which are different from each other in viewpoints. Second, Bo Myoung's MokWooDo introduces the discipline processes from MiMok (未牧: Before Tamed) to JinGongMyoYu (眞空妙有: True Vacancy is not Separately Existing) of SsangMin (雙泯: the Level where Only Core Image Appears with Every Other Thing Faded out) that lie on the method called BangHalGiYong (棒喝機用: a Way of Using Rod to Scold). On the other side, however, it puts its ultimate goal onto the way to overcome even such core image of SsangMin. Third, Kwak Ahm's SimWooDo shows the discipline processes of JeomSu from SimWoo (尋牛: Searching out a Bull) to IpJeonSuSu (入鄽垂手: Entering into a Place to Exhibit Tools). That is, it puts its ultimate goal onto HwaGwangDongJin (和光同塵: Harmonized with Others not Showing your own Wisdom) where you are going together with ordinary people by going up to the level of 'SangGuBori (上求菩提: Discipline to Go Up to Gain Truth) and HaHwaJungSaeng (下化衆生: Discipline to Go Down to Be with Ordinary People)' through SaGyoIpSeon (捨敎入禪: Entering into Zen Sect Buddhism after Completing a Certain Volume of Doctrine Study), which are working for leading the ordinary people of all to finding out their Buddhist Nature. Fourth, Shimiz Shunryu (清水春流)'s painting YuGaSipMaDo (儒家十馬圖: Painting of Ten Horses of Confucian School) borrowed Bo Myoung's MokWooDo. That is, it borrowed the terms and pictures of Buddhist School. However, it features 'WonBulIpYu (援佛入儒: Enlightenment of Buddhist Nature by Confucianism)', which is based on the process of becoming a greatly wise person through Confucian study to go back to the original good nature. From here, it puts its goal onto becoming a greatly wise person, GunJa who is completely harmonized with truth, through the study of HamYang (涵養: Mind Discipline by Widening Learning and Intelligence) that controls outside mind to make the mind peaceful. Its ultimate goal is in accord with "SangCheonJiJae, MuSeongMuChee (上天之載, 無聲無臭: Heaven Exists in the Sky Upward; It is Difficult to Get the Truth of Nature, which has neither sound nor smell)' words from Zhōngyōng. Fifth, WonMyeongNhoYin (圓明老人)'s painting SangSeungSuJinSamYo (上乘修真三要: Painting of Three Essential Things to Discipline toward Truth) borrowed Bo Myoung's MokWooDo while it consists of totally 13 sheets of picture to preach the painter's will and preference. That is, it features 'WonBulIpDo (援佛入道: Following Buddha to Enter into Truth)' to preach the painter's doctrine of Taoism by borrowing the pictures and poetry type chants of Buddhist School. Taoism aims to become a miraculously powerful Taoist hermit who never dies by Taoist healthcare methods. Therefore, Taoists take the mind discipline called BanHwanSimSeong (返還心性: Returning Back to Original Mind Nature), which makes Taoists go ultimately toward JaGeumSeon (紫金仙) that is the original origin by changing into a saint body that is newly conceived with the vital force of TaeGeuk abandoning the existing mind and body fully. This is a unique feature of Taoism, which puts its ultimate goal onto the way of BeopShinCheongJeong (法身淸淨: Pure and Clean Nature of Buddha) that is in accord with JiDoHoiHong (至道恢弘: Getting to Wide and Big Truth).

• Journal of Korean Society of Forest Science
• /
• v.15 no.1
• /
• pp.1-38
• /
• 1972

1. Objective of the Study The objective of the study was to make fundamental suggestions for drawing a forest insurance system applicable in Korea by investigating forest insurance systems undertaken in foreign countries, analyzing the forest hazards occurred in entire forests of Korea in the past, and hearing the opinions of people engaged in forestry. 2. Methods of the Study First, reference studies on insurance at large as well as on forest insurance were intensively made to draw the characteristics of forest insurance practiced in main forestry countries, Second, the investigations of forest hazards in Korea for the past ten years were made with the help of the Office of Forestry. Third, the questionnaires concerning forest insurance were prepared and delivered at random to 533 personnel who are working at different administrative offices of forestry, forest stations, forest cooperatives, colleges and universities, research institutes, and fire insurance companies. Fourth, fifty three representative forest owners in the area of three forest types (coniferous, hardwood, and mixed forest), a representative region in Kyonggi Province out of fourteen collective forest development programs in Korea, were directly interviewed with the writer. 3. Results of the Study The rate of response to the questionnaire was 74.40% as shown in the table 3, and the results of the questionaire were as follows: (% in the parenthes shows the rates of response; shortages in amount to 100% were due to the facts of excluding the rates of response of minor respondents). 1) Necessity of forest insurance The respondents expressed their opinions that forest insurance must be undertaken to assure forest financing (5.65%); for receiving the reimbursement of replanting costs in case of damages done (35.87%); and to protect silvicultural investments (46.74%). 2) Law of forest insurance Few respondents showed their views in favor of applying the general insurance regulations to forest insurance practice (9.35%), but the majority of respondents were in favor of passing a special forest insurance law in the light of forest characteristics (88.26%). 3) Sorts of institutes to undertake forest insurance A few respondents believed that insurance companies at large could take care of forest insurance (17.42%); forest owner's mutual associations would manage the forest insurance more effectively (23.53%); but the more than half of the respondents were in favor of establishing public or national forest insurance institutes (56.18%). 4) Kinds of risks to be undertaken in forest insurance It would be desirable that the risks to be undertaken in forest insurance be limited: To forest fire hazards only (23.38%); to forest fire hazards plus damages made by weather (14.32%); to forest fire hazards, weather damages, and insect damages (60.68%). 5) Objectives to be insured It was responded that the objectives to be included in forest insurance should be limited: (1) To artificial coniferous forest only (13.47%); (2) to both coniferous and broad-leaved artificial forests (23.74%); (3) but the more than half of the respondents showed their desire that all the forests regardless of species and the methods of establishment should be insured (61.64%). 6) Range of risks in age of trees to be included in forest insurance The opinions of the respondents showed that it might be enough to insure the trees less than ten years of age (15.23%); but it would be more desirous of taking up forest trees under twenty years of age (32.95%); nevertheless, a large number of respondents were in favor of underwriting all the forest trees less than fourty years of age (46.37%). 7) Term of a forest insurance contract Quite a few respondents favored a contract made on one year basis (31.74%), but the more than half of the respondents favored the contract made on five year bases (58.68%). 8) Limitation in a forest insurance contract The respondents indicated that it would be desirable in a forest insurance contract to exclude forests less than five hectars (20.78%), but more than half of the respondents expressed their opinions that forests above a minimum volume or number of trees per unit area should be included in a forest insurance contract regardless of the area of forest lands (63.77%). 9) Methods of contract Some responded that it would be good to let the forest owners choose their forests in making a forest insurance contract (32.13%); others inclined to think that it would be desirable to include all the forests that owners hold whenerver they decide to make a forest insurance contract (33.48%); the rest responded in favor of forcing the owners to buy insurance policy if they own the forests that were established with subsidy or own highly vauable growing stock (31.92%) 10) Rate of premium The responses were divided into three categories: (1) The rate of primium is to be decided according to the regional degree of risks(27.72%); (2) to be decided by taking consideration both regional degree of risks and insurable values(31.59%); (3) and to be decided according to the rate of risks for the entire country and the insurable values (39.55%). 11) Payment of Premium Although a few respondents wished to make a payment of premium at once for a short term forest insurance contract, and an annual payment for a long term contract (13.80%); the majority of the respondents wished to pay the premium annually regardless of the term of contract, by employing a high rate of premium on a short term contract, but a low rate on a long term contract (83.71%). 12) Institutes in charge of forest insurance business A few respondents showed their desire that forest insurance be taken care of at the government forest administrative offices (18.75%); others at insurance companies (35.76%); but the rest, the largest number of the respondents, favored forest associations in the county. They also wanted to pay a certain rate of premium to the forest associations that issue the insurance (44.22%). 13) Limitation on indemnity for damages done In limitation on indemnity for damages done, the respondents showed a quite different views. Some desired compesation to cover replanting costs when young stands suffered damages and to be paid at the rate of eighty percent to the losses received when matured timber stands suffered damages(29.70%); others desired to receive compensation of the actual total loss valued at present market prices (31.07%); but the rest responded in favor of compensation at the present value figured out by applying a certain rate of prolongation factors to the establishment costs(36.99%). 14) Raising of funds for forest insurance A few respondents hoped to raise the fund for forest insurance by setting aside certain amount of money from the indemnity paid (15.65%); others wished to raise the fund by levying new forest land taxes(33.79%); but the rest expressed their hope to raise the fund by reserving certain amount of money from the surplus money that was saved due to the non-risks (44.81%). 15) Causes of fires The main causes of forest fires 6gured out by the respondents experience turned out to be (1) an accidental fire, (2) cigarettes, (3) shifting cultivation. The reponses were coincided with the forest fire analysis made by the Office of Forestry. 16) Fire prevention The respondents suggested that the most important and practical three kinds of forest fire prevention measures would be (1) providing a fire-break, (2) keeping passers-by out during the drought seasons, (3) enlightenment through mass communication systems. 4. Suggestions The writer wishes to present some suggestions that seemed helpful in drawing up a forest insurance system by reviewing the findings in the questionaire analysis and the results of investigations on forest insurance undertaken in foreign countries. 1) A forest insurance system designed to compensate the loss figured out on the basis of replanting cost when young forest stands suffered damages, and to strengthen credit rating by relieving of risks of damages, must be put in practice as soon as possible with the enactment of a specifically drawn forest insurance law. And the committee of forest insurance should be organized to make a full study of forest insurance system. 2) Two kinds of forest insurance organizations furnishing forest insurance, publicly-owned insurance organizations and privately-owned, are desirable in order to handle forest risks properly. The privately-owned forest insurance organizations should take up forest fire insurance only, and the publicly-owned ought to write insurance for forest fires and insect damages. 3) The privately-owned organizations furnishing forest insurance are desired to take up all the forest stands older than twenty years; whereas, the publicly-owned should sell forest insurance on artificially planted stands younger than twenty years with emphasis on compensating replanting costs of forest stands when they suffer damages. 4) Small forest stands, less than one hectare holding volume or stocked at smaller than standard per unit area are not to be included in a forest insurance writing, and the minimum term of insuring should not be longer than one year in the privately-owned forest insurance organizations although insuring period could be extended more than one year; whereas, consecutive five year term of insurance periods should be set as a mimimum period of insuring forest in the publicly-owned forest insurance organizations. 5) The forest owners should be free in selecting their forests in insuring; whereas, forest owners of the stands that were established with subsidy should be required to insure their forests at publicly-owned forest insurance organizations. 6) Annual insurance premiums for both publicly-owned and privately-owned forest insurance organizations ought to be figured out in proportion to the amount of insurance in accordance with the degree of risks which are grouped into three categories on the basis of the rate of risks throughout the country. 7) Annual premium should be paid at the beginning of forest insurance contract, but reduction must be made if the insuring periods extend longer than a minimum period of forest insurance set by the law. 8) The compensation for damages, the reimbursement, should be figured out on the basis of the ratio between the amount of insurance and insurable value. In the publicly-owned forest insurance system, the standard amount of insurance should be set on the basis of establishment costs in order to prevent over-compensation. 9) Forest insurance business is to be taken care of at the window of insurance com pnies when forest owners buy the privately-owned forest insurance, but the business of writing the publicly-owned forest insurance should be done through the forest cooperatives and certain portions of the premium be reimbursed to the forest cooperatives. 10) Forest insurance funds ought to be reserved by levying a property tax on forest lands. 11) In order to prevent forest damages, the forest owners should be required to report forest hazards immediately to the forest insurance organizations and the latter should bear the responsibility of taking preventive measures.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.