• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.47-55
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.330-330
• /
• 2017

최근 우리나라 주변에 잦은 지진으로 인한 재해위험도 증가 우려가 커지고 있다. 국내 외에서 지진해일 위험도 평가는 시나리오를 기준으로 수치해석을 수행하고 이들 결과를 활용하는 절차로 수행된다. 그러나 위험도 평가는 하중조건 즉, 지진해일을 발생시키는 지진의 발생빈도 및 크기를 종합적으로 고려한 확률 계산이 우선적으로 요구되나, 기존 분석 절차에서는 고려가 되지 않거나 상대적으로 간략화 되어 진행되고 있다. 이러한 점에서 본 연구에서는 과거 우리나라 주변에 지진 및 지진해일 자료, 수치해석 모형 결과를 활용하여, 지진의 규모와 발생빈도를 종합적으로 고려할 수 있는 지진해일 위험도 평가 방법을 수립하고자 한다. 본 연구에서는 첫째, 지진 위험도 평가를 위해서 Poisson-Pareto 분포를 이용하였다. 둘째, 지진발생 위치 및 크기를 고려한 지진해일 위험도 평가 모형을 개발하였다. 셋째, 지진발생 위험도 및 지진해일 위험도를 통합한 해석 모형을 개발하고자 하며, 본 연구애서 제시하는 모든 해석 절차는 매개변수의 불확실성을 고려할 수 있도록 Bayesian 해석기법을 도입하여 진행하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.233-233
• /
• 2019

본 연구에서는 3형식 다공성 인공어초의 국부세굴 발생에 따른 인공어초의 안정성 검토를 위하여 3차원 수치모형인 FLOW-3D의 Sediment 모듈을 적용하여 분석을 실시하였다. 실험파랑 설정을 위하여 인공어초 설치 예정지인 서해 대상해역(대청도, 연평도 인근)의 100년 빈도 설계파랑을 적용하였으며, Bretschneider-Mitsuyasu 스펙트럼 기법을 통하여 파랑을 재현하였다. 원형상격자 조건은 최대 0.1m~2.0m에 해당하며, 수치모형실험 해석 시간을 고려하여 입사파랑의 진행방향으로 인공어초의 1/2 폭에 해당하는 X축(190개), Y축(80개), Z축(110~180개) 영역에 대한 격자조건 설정하고 분석을 실시하였다. 분석은 인공어초 하중에 따른 동적 거동을 반영하는 FSI(Flood Structure Interaction)기법을 적용하였으며, 분석결과 인공어초 구조물 하단의 돌출부분에서 세굴발생이 확인되었으며, 최대세굴심은 3형식 인공어초의 규격 및 단위체적당 중량이 클수록 높게 발생하였다.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.381-388
• /
• 2007

The regular RC structures have been transformed into irregular RC structures by alternate load of RC structures during explosive demolition. Numerical simulation programs have contributed to a better understanding of large displacement collapse behavior during explosive demolition, but there remain a number of problems which need to be solved. In this study, the 1/5 scaled 1, 3 and 5 stories RC structures were designed and fabricated. To consider the collapse possibility of upper dead load, fabricated RC structures were demolished by means of felling method. To observe the collapse behavior of the RC structures during felling, displacement of X-direction (or horizontal), displacement of Z-direction (or vertical) md relative displacement angle from respective RC structures were analyzed. Finally explosive demolition on the scaled RC structures using felling method are carried out, collapse behavior by felling method is affected by upper dead load of scaled RC structures. Displacement of X and Z direction increases gradually to respective 67ms and 300ms after blasting. It is confirmed that initial collapse velocity due to alternate load has a higher 3 stories RC structures than 5 stories.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.135-145
• /
• 2004

In this study, the behavior of unpropped diaphragm walls on decomposed granite soil was investigated through centrifugal and numerical modelling. Centrifuge model tests were performed by changing the interval distance of surcharge. Excavation was simulated during the centrifuge tests by operating a solenoid valve that allowed the zinc chloride solution to drain from the excavation. In these tests, ground deformation, wall displacement and bending moment induced by excavation were measured. FLAC program which can be able to apply far most geotechnical problems was used in the numerical analysis. In numerical simulation, Mohr-Coulomb model fur the ground model, an elastic model for diaphragm wall were used for two dimensional plane strain condition. From the results of model tests, failure surface was straight line type, the ground of retained side inside failure line had downward displacement to the direction of the wall, and finally the failure was made by the rotation of the wall. The angle of failure line was about 67 ∼ 74$^{\circ}$, greater than calculated value. The locations of the maximum ground settlement obtained from model tests and analysis results are in good agreements. The displacement of wall and the change of the embedment depth is likely to have linear relationship.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.113-123
• /
• 2006

An experimental investigation on the behavior of reinforced concrete coupling beams is presented. The test variables are the span-to-depth ratio, the ratio of flexural reinforcements and the ratio of shear rebars. The distribution of arch action and truss action which compose the mechanism of shear resistance is discussed. The increase of plastic deformation after yielding transforms the shear transfer by arch action into by truss action. This study proposes the deformation model for reinforced concrete coupling beams considering the bond slip of flexural reinforcement. The strain distribution model of shear reinforcements and flexural reinforcements based on test results is presented. The yielding of flexural reinforcements determines yielding states and the ultimate states of reinforced concrete coupling beam are defined as the ultimate compressive strain of struts and the degradation of compressive strength due to principal tensile strain of struts. The flexural-shear failure mechanism determines the ultimate state of RC coupling beams. It is expected that this model can be applied to displacement-based design methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.99-99
• /
• 2021

본 연구에서는 기상 자료와 적설 특성 자료의 관계를 도출하고, 이와 추계 일기 생성 모형을 활용하여 합성 적설심 시계열을 모의하는 방법에 대하여 제안한다. 추계 일기 생성 모형에서는 적설량을 직접 모의하지 않기 때문에 강수량을 적설량으로 변환해야한다. 이를 위해 도입한 관계식은 다음과 같다. 첫째로 기상청 적설 예보의 적설 유무 판단 기준을 이용하였다. 이 기준에서는 상대습도와 지상기온에 따라 강수의 형태를 비, 눈, 진눈깨비로 구분한다. 둘째로 강수가 적설로 판단되었을 때 강수량을 신적설심으로 환산하는 수상당량비를 지상기온과 회귀 분석하였다. 선행 연구에 따라 3시간 1 mm 이상 5 mm 이하 강수와 3시간 5 mm 이상 강수 사상에 대하여 나누어 sigmoid형 곡선을 이용하여 회귀 분석하였다. 마지막으로 융설에 의한 적설심 감소량을 지상기온과 복사량의 함수로 표현하였으며, 각 변수의 계수는 입자 군집 최적화 방법을 통하여 보정하였다. 추계 일기 생성 모형으로는 AWE-GEN 모형을 활용하였으며, 시험 자료로 강릉(105) 종관기상관측소의 24년 기간(1982-2005) 자료를 활용하여 합성 적설심 시계열을 생성하였다. 합성 적설심 시계열 모의 과정은 다음과 같다. (1) 추계 일기 생성 모형으로 합성 일기 자료 생성, (2) 강수 발생 시 적설 유무 판단, (3) 적설로 판단 시 수상당량비를 계산하여 신적설심 추정, (4) 기존 적설심에 신적설심을 더하고, 적설심 감소량만큼 감소. 위와 같은 과정으로 200년 길이 합성 적설심 시계열을 모의한 결과 극한 사상을 과소 추정하는 경향이 나타나 추가적인 개선이 필요한 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.571-576
• /
• 2011

In general, conventional road pavements are designed under the assumption that the shear strength of geomaterials are under saturated state. In reality, however, most of the pavement geomaterials exists under the unsaturated state. To deal with this gap between saturated and unsaturated conditions, in this paper, unsaturated shear strength was estimated using the results from the triaxial compression test and soil-water characteristics curves. Then, yield loads were assessed using 2-Dimensional finite element method with the selected nonlinear elastic model and the Mohr-Coulomb yield criteria. In addition, various unsaturated condition and surface layer effects on the yield load of granular materials were identified. Therefore, the results demonstrated would provide a possibility to estimate bearing capacity of paved or unpaved roads using unsaturated soil mechanics.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.135-148
• /
• 2020

In this study, to investigate the effect of the array of cylindrical baffles on debris flow impact load, a series of small-scale tests were conducted according to varying row numbers of installed baffles in the flume. After the test, the behavior of debris flow interacting with baffles during the flow process was investigated. Based on the results, the influence varying velocity and flow depth on Froude number and dynamic pressure coefficient were analyzed. Test results showed that the greatest peak impact load occurred at the second row of baffle arrays. The dynamic pressure coefficient was also estimated by suggested equation and compared with previous studies.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.519-524
• /
• 2005

Due to various types of errors added to dynamic weight measurement data, proper methods to reduce measurement errors are required to produce reliable weights. It is very difficult to reduce the measurement error due to excessive oscillation of the system. To cope with parasitic types of errors in real systems, information provided by the photo sensors are utilized and combined in such a way to reduce the measurement errors of load cells. In addition to four channels of load cells from a model trailer, photo sensors are used to obtain the information to compensate the error induced from vertical movement of the vehicle due to the variation of ground level. A model trailer system is run to verify the effectiveness of the proposed method to reduce noise of dynamic weight measurements.