• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.459-466
• /
• 2007

TCP/IP processing imposes a heavy load on the host CPU when it is processed by the host CPU on a very high-speed network. Recently the TCP/IP Offload Engine (TOE), which processes TCP/IP on a network adapter instead of the host CPU, has become an attractive solution to reduce the load in the host CPU. There have been two approaches to implement TOE. One is the software TOE in which TCP/IP is processed by an embedded processor and the other is the hardware TOE in which TCP/IP is processed by a dedicated ASIC. The software TOE has poor performance and the hardware TOE is neither flexible nor expandable enough to add new features. In this paper we designed and implemented a hybrid TOE architecture, in which TCP/IP is processed by cooperation of hardware and software, based on an FPGA that has two embedded processor cores. The hybrid TOE can have high performance by processing time-critical operations such as making and processing data packets in hardware. The software based on the embedded Linux performs operations that are not time-critical such as connection establishment, flow control and congestions, thus the hybrid TOE can have enough flexibility and expandability. To improve the performance of the hybrid TOE, we developed a hardware-based transmission/reception accelerator that processes important operations such as creating data packets. In the experiments the hybrid TOE shows the minimum latency of about $19{\mu}s$. The CPU utilization of the hybrid TOE is below 6 % and the maximum bandwidth of the hybrid TOE is about 675 Mbps.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.691-698
• /
• 2006

TCP/IP Offload Engine (TOE) is a technology that processes TCP/IP on a network adapter instead of a host CPU to reduce protocol processing overhead from the host CPU. There have been some approaches to implementing TOE: software TOE based on an embedded processor; hardware TOE based on ASIC implementation; and hybrid TOE in which software and hardware functions are combined. In this paper, we designed software modules and hardware modules for a hybrid TOE on an FPGA that had two processor cores. Software modules are based on the embedded Linux. Hardware modules are for data transmission (TX) and reception (RX). One core controls the TX path and the other controls the RX path of the Linux. This TX/RX path separation mechanism can reduce task switching overheads between processes and overcome poor performance of single embedded processor. Hardware modules deal with creating headers for outgoing packets, processing headers of incoming packets, and fetching or storing data from or to the host memory by DMA. These can make it possible to improve the performance of data transmission and reception. We proved performance of the TOE with separated transmission and reception paths by performing experiments with a TOE network adapter that was equipped with the FPGA having processor cores.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.2
• /
• pp.136-146
• /
• 2019

A solid oxide fuel cell (SOFC) based hybrid desiccant cooling system model is developed to study the effect of fuel utilization rate of the SOFC on the reduction of energy consumption and $CO_2$ emission. The SOFC-based hybrid desiccant cooling system consists of an SOFC system and a Hybrid desiccant cooling system (HDCS). The SOFC system includes a stack and balance of plant (BOP), and HDCS. The HDCS consists of desiccant rotor, indirect evaporative cooler, electric heat pump (EHP), and heat exchangers. In this study, using energy load data of a commercial office building and SOFC-based HDCS model, the amount of ton of oil equivalent (TOE) and ton of $CO_2$ ($tCO_2$) are calculated and compared with the TOE and $tCO_2$ generation of the EHP using grid electricity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.721-729
• /
• 2014

A hybrid desiccant cooling system (HDCS) that uses a heat pump driven by district heating instead of a sensible rotor can provide an increased energy efficiency in summer. In this paper, the summer operation costs and initial costs of both the HDCS and traditional systems are analyzed using annual equal payments, and national benefits are found from using the HDCS instead of traditional systems. In the analysis results, the HDCS reduces the operation cost by 30 compared to the traditional systems, and each HDCS unit has 0.079 TOE per year of primary energy savings and 0.835 $TCO_2$ per year of $CO_2$ emission reduction more than the traditional systems. If HDCSs were to be installed in 680,000 households by 2020, this would produce a replacement power effect of 463 MW. Despite this savings effect, HDCSs require a government subsidy before they can be supplied because the initial cost is higher than that of traditional systems. Thus, this paper calculates suitable subsidies and suggests a supply method for HDCSs considering the national benefits.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.65-79
• /
• 2019

The study attempted to estimate the optimal facility capacity by combining renewable energy sources that can be connected with gas CHP in industrial complexes. In particular, we reviewed industrial complexes subject to energy use plan from 2013 to 2016. Although the regional designation was excluded, Sejong industrial complex, which has a fuel usage of 38 thousand TOE annually and a high heat density of $92.6Gcal/km^2{\cdot}h$, was selected for research. And we analyzed the optimal operation model of CHP Hybrid System linking fuel cell and photovoltaic power generation using HOMER Pro, a renewable energy hybrid system economic analysis program. In addition, in order to improve the reliability of the research by analyzing not only the heat demand but also the heat demand patterns for the dominant sectors in the thermal energy, the main supply energy source of CHP, the economic benefits were added to compare the relative benefits. As a result, the total indirect heat demand of Sejong industrial complex under construction was 378,282 Gcal per year, of which paper industry accounted for 77.7%, which is 293,754 Gcal per year. For the entire industrial complex indirect heat demand, a single CHP has an optimal capacity of 30,000 kW. In this case, CHP shares 275,707 Gcal and 72.8% of heat production, while peak load boiler PLB shares 103,240 Gcal and 27.2%. In the CHP, fuel cell, and photovoltaic combinations, the optimum capacity is 30,000 kW, 5,000 kW, and 1,980 kW, respectively. At this time, CHP shared 275,940 Gcal, 72.8%, fuel cell 12,390 Gcal, 3.3%, and PLB 90,620 Gcal, 23.9%. The CHP capacity was not reduced because an uneconomical alternative was found that required excessive operation of the PLB for insufficient heat production resulting from the CHP capacity reduction. On the other hand, in terms of indirect heat demand for the paper industry, which is the dominant industry, the optimal capacity of CHP, fuel cell, and photovoltaic combination is 25,000 kW, 5,000 kW, and 2,000 kW. The heat production was analyzed to be CHP 225,053 Gcal, 76.5%, fuel cell 11,215 Gcal, 3.8%, PLB 58,012 Gcal, 19.7%. However, the economic analysis results of the current electricity market and gas market confirm that the return on investment is impossible. However, we confirmed that the CHP Hybrid System, which combines CHP, fuel cell, and solar power, can improve management conditions of about KRW 9.3 billion annually for a single CHP system.