• Journal of the korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.12-21
• /
• 2001

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.942_944
• /
• 2009

본 논문은 VRLA 배터리와 Ultra-Capacitor 모듈을 이용한 복합형 에너지 저장시스템에서 우수한 출력 특성을 가진 Ultra-Capacitor 모듈의 SOC를 정확하게 산출하고 보정하는 알고리즘을 소개하고, 마일드 하이브리드 자동차(MHEV)의 운행 조건을 모사한 사이클 프로파일과 차량 시뮬레이터 장비를 활용하여, 제안된 알고리즘의 유용성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.264-265
• /
• 2007

본 논문에서는 하이브리드 전기 자동차(Hybrid Electric Vehicle, HEV)의 실제 주행패턴 데이터를 기준으로 하이브리드 전력 시스템용 양방향 DC-DC 컨버터를 설계하고, 시뮬레이터를 구성한다. HEV의 주행패턴 데이터 중 가 감속 구간 일부를 선택하여 전기적 부하 변화로 모델링하고, 이를 통해 양방향 DC-DC 컨버터의 모드별 동작을 시뮬레이션 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.17-24
• /
• 2011

TMED(Transmission Mounted Electric Device) parallel hybrid configuration can realize EV(Electric Vehicle) mode by disengaging the clutch between an engine and a transmission-mounted motor to improve efficiencies of low load driving and regenerative braking. In the EV mode, however, jerk can be induced since there are insufficient damping elements in the drive-train. Though the jerk gives demoralizing influence upon driving comport, adding a physical damper is not applicable due to constraints of the layout. This study suggests the jerk reduction control, composed of active damping method and torque profiling method, to suppress the jerk without hardware modification. The former method creates a virtual damper by generating absorbing torque in the opposite direction of the oscillation. The latter method reduces impulse on the mated gear teeth of the drive-train by limiting the gradient of traction torque when the direction of the torque is reversed. To validate the effectiveness of the suggested strategy, a series of vehicle tests are carried out and it is observed that the amplitude of the oscillation can be reduced by up to 83%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

The battery cells in lithium-ion battery pack assembled with high-capacity and high-power pouch cells, are commonly cooled with thin aluminum cooling plates in contact with the cells. For HEV/EV lithium-ion battery systems assembled with high-capacity, high-power pouch cells, the cells are commonly cooled with thin aluminum cooling plates in contact with the cells. Thin aluminum cooling plates are cooled by cold plate with coolant flow paths. In this study, the effect of the battery cooling system design including aluminum cooling plate thickness and various position of cold plate on the cooling performance are investigated by using finite element methods (FEM). Optimal cooling plate and cold plate design are proposed for improving the uniformity in temperature distributions as well as lowering average temperature for the cells with large capacities based on the simulation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.26-32
• /
• 2008

This research presents a simulation for the fuel economy of parallel diesel hybrid vehicle. Diesel engines compared to gasoline engines have the advantages of higher fuel economy and lower $CO_2$ emission. One of the most ways to meet future fuel economy and emissions regulation is to combine diesel engine technology with a hybrid electric vehicle. The simulation of HEV is growing need for rapid analysis of the many configurations and component options. WAVE, a one-dimensional engine analysis tool, was used to a 2.7L diesel engine. ADVISOR, designed for rapid analysis of the performance and fuel economy of vehicle models, was used to conventional and hybrid electric vehicle by the use of output file from WAVE as the input engine data file for ADVISOR. A parallel diesel HEV is at least $19.7{\sim}36%$ higher fuel economy and improved acceleration ability compared to a conventional diesel vehicle. The energy loss of the parallel diesel HEV is $23{\sim}38%$ less than the conventional vehicle using regeneration.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.591-600
• /
• 2015

The efficiency of a powertrain system of hybrid vehicle is highly dependent on the design and control of the hybrid powertrain system. In other words, the optimal design of the powertrain systems is coupled with optimal control of the powertrain system. Therefore, the solution of an optimal design problem for hybrid vehicles is computationally and timely very expensive. For example, dynamic programming, which is a recursive optimization method, is usually used to evaluate the best fuel economy of certain hybrid vehicle design, and, thus, the evaluation takes tens of minutes to several hours. This research aims to accelerate the speed of efficiency evaluation of hybrid vehicles. We suggest a mathematical treat and a methodological treat to reduce the computational load. The mathematical treat is that the dynamics of system is discretized with sparse sampling time without loss of energy balance. The methodological treat is that the efficiency of the hybrid vehicle is inferred by characteristic loss evaluation that is computationally inexpensive. With the suggested methodology, evaluating a design candidate of hybrid powertrain system is taken few minutes, which was taken several hours when dynamic programming is used.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.112-121
• /
• 2015

In this paper, powertrain of output split type plug-in hybrid electric vehicle is analyzed for the operation range of speed, torque, and power. First, it is assumed that the efficiency of motor is 100%. And, the speed and torque equations are derived based on the lever analogy. With the above equations, the simulations are performed for the powertrain of output split type plug-in hybrid electric vehicle. From the simulation results, it is found that the output torques of EV1 and series modes are larger than the EV2 and power split modes' ones. It means the EV1 and series modes can be used for the rapid acceleration. But the EV1 and series modes can be used only the velocity of under the 120 km/h. It is because the motor reaches its maximum speed when the velocity is over the 120 km/h for the EV1 and series modes. When the engine is turned on, the engine power is transmitted through the two motors. But, the power split mode shows the power split of engine at the output shaft, and it has the point of zero motor power. Thus, the transmission efficiency of the power split mode can be higher than the series mode's one, it the motor efficiency is considered.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1678-1679
• /
• 2011

고속/고전압으로 동작하는 자동차 전장품에 대한 EMI/EMC(Electromagnetic Interfere / Electromagnetic Compatibility) 문제는 기존의 PCB(Printed Circuit Board)에서의 문제와 다르며 하이브리드/전기 자동차에서 중요하게 다뤄지는 배터리에 대한 최적화 된 모델링 방법이 본 논문에 소개 되어있다. 기존의 단순한 저항과 커패시터의 연결로 표현 된 모델링이 아닌 고주파를 반영 할 수 있는 모델링 방법을 사용하였다. 이를 분석하기 위해 ANSYS사의 Simplorer와 Matlab을 사용해서 결과를 보았다. 본 논문에서는 DOD(Depth Of Discharge)에 따른 통합 등가회로 모델을 구현하면서 기존의 단순한 지수함수 곡선적합(Curve fitting)이 아닌 SOC(State Of Charge)의 경계조건을 반영하여 정확성을 높였다. 이로써 실험 데이터를 이용해 배터리 등가회로 모델링을 하여 정확한 배터리 동작의 해석을 할 수 있고 이에 따른 전도성 방사(CE : Conducted Emission)문제에 보다 쉽게 접근 할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.381-382
• /
• 2014

하이브리드 자동차는 동력을 얻기 위해 엔진과 전동기를 모두 사용한다. 이 하이브리드 자동차의 구동부 구조는 다양한 형태로 구성할 수 있는데, 이 중 직렬-병렬 구조는 엔진의 토크 및 속도 자유도를 모두 확보할 수 있어 높은 효율을 달성할 수 있다. 직렬-병렬 구조는 발전기, 전동기, 그리고 속도 분배를 위한 유성 기어를 이용하여 주로 구현되고 있고, 최근에는 다양한 새로운 형태의 전동기가 개발되어 이를 구동부에 적용하는 것에 관한 연구가 진행되고 있다. 본 논문에서는 이 중 고정자를 회전자에 독립적으로 회전시킬 수 있는 새로운 형태의 전동기를 사용하는 구조에 관한 내용을 다룬다. 위의 전동기는 기존 구조에서 유성 기어 및 발전기의 역할을 대체하여 토크 분배 및 전기적 출력 변환을 수행할 수 있다. 또한, 회전하는 고정자에 인버터 회로를 탑재하여 슬립 링 대신 회전하는 고정자에 전력을 공급하는 방식을 제안한다.