• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.568-575
• /
• 2023

This paper aims to evaluate the quality characteristics and healing performance of precast concrete incorporating self-healing technology as a key technique for the construction of smart cities. The study found that precast concrete mixed with hybrid capsules exhibited a tendency of reduced slump and air content, impacting the quality characteristics. Specifically, the slump decreased by up to 14 %, and the air content by up to 9 %. Moreover, the inclusion of hybrid capsules in the concrete resulted in a maximum decrease of 16 % in compressive strength and 18 % in flexural strength. However, the introduction of hybrid capsules significantly enhanced the crack healing performance. The assessment through water permeability tests showed that the healing rate of 0.3 mm crack width after a 28-day healing period improved as the mixing ratio increased, with the healing rates at 1 %, 3 %, and 5 % hybrid capsule mixtures observed to increase by approximately 16 %, 25 %, and 32 %, respectively.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.151-168
• /
• 2022

Nowadays companies are required to achieve social goals beyond maximizing shareholder profits. Accordingly, it is important to pursue both the economic and social goals of a company at the same time. Thus the importance of hybrid organizations is increasing theoretically and practically. In particular, since hybrid organizations essentially have the complexity of pursuing both economic and social purposes, the institutional demands of various stakeholders surrounding hybrid organizations are also conflicting. Several previous studies have considered how hybrid organizations respond to these conflicting institutional demands, but most studies are limited to studying at a specific point in time. As a result, there was a limit to analyzing the dynamics in response to conflicting institutional demands as the hybrid organization expanded its business. This study predicted that the hybrid organization would take selective coupling with conflicting institutional demands and that the process of responding to institutional demands would change according to the organization's growth. In this study, we had a case study about Noul and Enuma, social ventures that operate relatively advanced business models with outstanding results in innovation and technology. As a result, social ventures show a selective coupling for conflicting institutional demands, and the selective coupling process changes as their business model are advanced. Specifically, in the early stages of the business, it appears to respond to economic and social demands at the same time with a single business model. When the business is advanced, two or more business models are operated, some of which respond to economic needs and some of which respond to social needs. In the early stages of business, social ventures respond to economic and social demands with a single business model to gain legitimacy and survive in the institutional demands. But when they enter the business growth period, they try to separate business models which respond to economic and social values because they pursue sustainable growth and challenge large-scale missions. Overall, this study attempted to contribute to an in-depth understanding of hybrid organizations by identifying that the method of responding to conflicting institutional demands varies depending on the growth process of social ventures.

• Bulletin of Korea Environmental Preservation Association
• /
• s.399
• /
• pp.16-19
• /
• 2012

2020년 1,300만대까지 그린카 시장의 확대가 예상되는 가운데 친환경 그린카 기술은 향후 자동차 기술경쟁의 주축이 될 것으로 보인다. 그린카 중 먼저 양산 체계로 진입한 하이브리드자동차는 2010년 전세계 87만대의 판매를 보이며 본격적인 시장 경쟁의 시대로 진입하였다. 우리나라도 자동차 산업의 기술경쟁력 강화를 위해서는 지속적이고, 장기적인 전략수립과 정부의 강력한 지원하에 기술개발이 추진되어야 한다.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.113-125
• /
• 2021

This research has the purpose to approach 'Audience participation theatre' through applying the concept of 'Hybrid' which newly come to the fore after 21st in a theatre space. In fact, 'Hybrid' has been suppling crucial power to create and pass a culture down for a long time, and it could not different to a theatre space. The hybridity in previous traditional theatre which is central 'text' and 'architectural theater' is limited movement only on the stage, such as 'an actor between presence and absence', 'a theatrical time between real and fiction' and 'an objet between An Sich(thing itself) and Fur Sich(thing with inner meaning). However after 20st's 'Avant-Garde' with 'decomposition sprit', the hybridity become broader from only on the stage to entire theatre space including auditorium caused by collapse the boundary between auditorium and stage. In other words, 'auditorium' and 'audience' are considered as 'a theatrical element' coequal with other elements, and it can create various special results through they are mixed equally. Therefore, 'Audience participation theatre' could regarded a kind of hybrid phenomenon between 'auditorium and audience' and 'actor and stage' which are most disparate relation, and it is also approached 'hybridized audience', 'hybridized space' and 'hybridized text' as a new identity.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2020.10a
• /
• pp.95-95
• /
• 2020

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.171-178
• /
• 2019

Fiber-reinforced polymer (FRP) composites have proved to be reliable as strengthening materials. Most of existing studies used single types of FRP composites. Therefore, in this experimental study, carbon FRP sheet, aramid FRP sheet, and hybrid FRP plate including glass fibers were fabricated, and the effect of pre-stressed FRP composites on flexural strengthening of reinforced concrete (RC) beams was investigated. In total, eight RC beam specimens were fabricated, including one control beam (specimen N) without FRP composites and seven FRP-strengthened beams. The main parameters were type of FRP composite, the number of anchors used for pre-stressing, and thickness of FRP plates. As a result, the beam strengthened with pre-stressed FRP plate showed superior performance to the non-strengthened one in terms of initial strength, strength and stiffness at yielding, and ultimate strength. As the number of anchors and thickness of FRP plate (i.e., amount of FRP plates) increased, the strengthening effect increased as well. When hybrid FRP plates were pre-stressed, the strengthening effect was higher in comparison with pre-stressed single type FRP plate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.62-68
• /
• 2009

The interaction between wall blowing and oxidizer flow can generate a very complicated flow characteristics in combustion chamber of hybrid rockets. LES analysis was conducted with an in-house CFD code to investigate the features of turbulent flow without chemical reactions. The numerical results reveal that the flow oscillations at a certain frequency exists on the fuel surface, which is analogous to those observed in the solid propellant combustion. However, the observation of oscillating flow at a certain frequency is only limited to a very thin layer adjacent to wall surface and the strength of the oscillation is not strong enough to induce the drastic change in temperature gradient on the surface. The visualization of fluctuating pressure components shows the periodic appearance of relatively high and low pressure regions along the axial direction. This subsequently results in the oscillation of flow at a certain fixed frequency. This implies that the resonance phenomenon would be possible if the external disturbances such as acoustic excitation could be imposed to the oscillating flow in the combustion chamber.

• The KIPS Transactions:PartB
• /
• v.9B no.4
• /
• pp.429-436
• /
• 2002

In order to apply the artificial neural network to the practical application, it is needed to implement it with the hardware system. It is most promising to make it with the hybrid VLSI among various possible technologies. When we Implement a trained network into the hybrid neuro-chips, it is to be performed the process of the quantization on its neuron outputs and its weights. Unfortunately this process cause the network's outputs to be distorted from the original trained outputs. In this paper we analysed in detail the statistical characteristics of the distortion. The analysis implies that the network is to be trained using the normalized input patterns and finally into the solution with the small weights to reduce the distortion of the network's outputs. We performed the experiment on an application in the time series prediction area to investigate the effectiveness of the results of the analysis. The experiment showed that the network by our method has more smaller distortion compared with the regular network.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.13-16
• /
• 2008

In a tension-controlled section, all steel tension reinforcement is assumed to yield at ultimate when using the strength design method to calculate the nominal flexural strength of members with steel reinforcement arranged in multiple layers. Therefore, the tension force is assumed to act at the centroid of the reinforcement with a magnitude equal to the area of tension reinforcement times the yield strength of steel. Because FRP materials have no plastic region, the stress in each reinforcement layer will vary depending on its distance from the neutral axis. Similarly, if different types of FRP bars are used to reinforce the same member, the stress level in each bar type will vary, and the member will show different behavior from our expectation. In this study, six high-strength concrete beam specimens reinforced with conventional steels, CFRP bars, and GFRP bars as flexural reinforcements were constructed and tested. The members reinforced with hybrid reinforcements showed higher stiffness, smaller crack width, and better ductility than the members reinforced with single type of FRP bars.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.124-130
• /
• 2007

Least squares ($l^2$ norm) solutions of seismic inversion tend to be very sensitive to data points with large errors. The $l^1$ norm minimization gives more robust solutions, but usually with higher computational cost. Iteratively reweighted least squares (IRLS) method gives efficient approximate solutions of these $l^1$ norm problems. I propose an efficient implementation of the IRLS method for a hybrid $l^1/l^2$ minimization problem that behaves as $l^2$ norm fit for small residual and $l^1$ norm fit for large residuals. The proposed algorithm shows more robust characteristics to the decision of the threshold value than the l1 norm IRLS inversion does with respect to the threshold value to avoid singularity.