• 기계와재료
• /
• v.23 no.3
• /
• pp.190-198
• /
• 2011

하이브리드 굴삭기는 에너지 재생 및 연비향상을 위하여 기존의 유압부품들 중 일부를 전기부품으로 대체하여 시스템을 구성하고 있다. 따라서, 하이브리드 굴삭기의 신뢰성을 평가하고 보장하기 위해서는 기계적인 부하와 전기적인 부하가 복합적으로 영향을 미쳐 발생되는 고장모드를 고려하여 신뢰성평가기법을 개발하여야 한다. 특히 하이브리드 굴삭기는 가혹한 실외 환경조건에서 운용되므로 새롭게 개발되는 부품들에 대하여 설계 결함을 조기에 발견하기 위한 복합 내환경 시험과 초가속 수명시험이 수행되어야만 한다. 본 연구에서는 FMEA, FMECA, FTA 및 HALT 등의 다양한 신뢰성 기법을 사용하여 하이브리드 굴삭기의 신뢰성평가기법을 개발하였고, 개발대상 하이브리드 굴삭기의 주요 동력전달 파트인 선회구동 시스템에 대한 신뢰성평가장비를 개발하고 구축하였다. 본 연구에서 개발된 하이브리드 굴삭기 신뢰성평가기법은 하이브리드 자동차의 부품들에 대한 신뢰성평가에도 유용하게 사용될 수 있을 것으로 기대된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.539-542
• /
• 2006

Many researches about next generation vehicles are trending toward HEV which has better fuel economy than an internal-combustion engine. But existing HEV has some defects at specific running states(eg. highway running It is possible that dual-mode hybrid system overcomes that defects. Mode change parameter, ${\gamma}$ helps to analyse the mode changing of dual mode hybrid and is applied at a numerical analysis on testing the performance. There is an additional constraint when vehicles drive on engine mode. No power assistance of battery applies on engine mode. Because vehicles must be sustained by only engine power while vehicle drives on constant speed mode. At the conclusion of this paper, graphs show the ability of motors that satisfy the equilibrium of the lever system. Designers can roughly determine capacities of the motors, parameters of the lever system by this analysing method.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.447-449
• /
• 2006

본 논문에서는 변압기를 이용한 새로운 PDP용 전력회수회로를 제안한다. 2권선형 변압기를 이용하여 패널에 저장된 에너지를 전원으로 회생시켜 방전 이외의 용량성 부하로 기인하는 전력손실을 최소화 한다. 제안된 회로는 주스위치의 영전압 스위칭과 보조 스위치의 영전류 스위칭이 가능하고 변압기를 이용하기 때문에 권선비에 의한 자유로운 공진에너지 조절이 가능한 장점을 갖는다. 변압기 이용으로 인해 영전압 및 고속구동을 위한 천이시간 증가시 전류주입모드와 전압인가모드를 동시에 사용할 수 있는 장점을 갖는다. 제안된 회로의 성능과 하이브리드 모드 구동시에 나타나는 장점을 42인치 PDP적용실험을 통해 검증해본다.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.137-138
• /
• 2007

하이브리드 자동차용 리듐 배터리의 수명을 예측하기 위한 듀얼 슬라이딩 모드 관측기를 설계하는 방법에 대해서 논의한다. 단순화된 R-C 모델을 사용하여 리듐 배터리를 전기적으로 모델링하고, 듀얼 슬라이딩 모드 관측기를 설계하는 방법에 대해서 순차적으로 서술한다. 제안된 시스템의 구조는 단순하고 구현이 쉬운 장점이 있으며, 외란에 대해서 강인하다는 특징도 가지고 있다. Lyapunov 조건에 의한 관측기의 수렴성이 증명되고 시스템의 성능은 UDDS(Urban dynamometer driving schedule) 시험에 의해서 입증되었다. 제안된 시스템은 실제 주행 상황에서도 짧은 계산시간과 뛰어난 추적 성능을 보여주었다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.136-137
• /
• 2012

본 논문에서는 하이브리드 전기자동차의 전장시스템 에너지 공급을 위한 보조배터리 충전용 저전압 직류 변환장치(Low voltage DC-to-DC Converter, LDC)를 제안한다. 차량 탑재용의 특성상 소형 경량화 설계 기술을 통한 연비증가, 동력성능의 향상이 매우 중요하다. 본 논문에서 제안하는 LDC는 부스트와 포워드 컨버터 구조를 혼합한 형태로 부스트 컨버터의 입력 인덕터를 변압기로 대체하여 포워드 컨버터와 결합시킴으로서 출력전압의 승 강압 동작을 구현한다. 따라서 차량 시동 시 내연기관을 구동하기 위한 승압모드로 동작하고, 그 외 일반적인 경우는 차량 내 각종 전장부하에 전력을 공급하기 위한 강압모드로 동작된다. 제안된 컨버터의 동작 모드에 따른 이론적 분석을 시행하고 PSIM을 이용한 시뮬레이션을 통해 타당성을 검증한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.383-389
• /
• 2014

POD analysis has been done to investigate the internal flow characteristics using LES calculation results of hybrid rocket combustion chamber. The special emphasis was put on the change in the mode energy distribution caused by the installation of diaphragm compared to the baseline case. Also the comparison was made to investigate the effect of wall blowing on the changes in the mode energy between the regions near and far from the diaphragm. For baseline case, POD results clearly distinguish the primary mode containing most of flow energy from the rest of flow modes (2-9 mode) depicting small scale modes. Also, the increase in the energy of flow modes 2-5 is responsible for the formation of relatively large scale structures due to diaphragm. In addition, the comparison of mode energy distributions of flow fields with diaphragm shows similar patterns in both wall blowing and no blowing case. This implies that the local increase in regression rate just after the diaphragm is directly associated with the increase in energy distributions of 2-5 modes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.145-150
• /
• 2022

An analytical model based on a modal transmission-line theory (MTLT) is developed to investigate the optical transmission through metal gratings. This model gives well physical meanings for the transmission as well as for the dispersion relations of the modes responsible for high transmission. These concepts provide accurate information even for real metals used in the visible~near-infrared wavelength range, where surface plasmon polaritons (SPP's) are excited. Furthermore, the dispersion relations allow the nature of the propagation modes to be assessed. The propagation modes are hybrid between Fabry-Pérot like modes and SPP's. It is important to consider different period and aspect ratio of metal gratings in order to determine the nature of the hybrid modes. In this paper, the sensing characteristics and mode propagation phenomena of high-performance plasma bio-sensors that depend on these variables were clearly analyzed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.841-850
• /
• 2008

Strength and failure of composite-to-aluminum rivetted, bonded, and rivet/bonding hybrid single-lap joints were investigated by experiment. A total of 82 joint specimens were tested with 3 different overlap lengths and 2 types of stacking sequence. FM73m adhesive film and NAS9308-4-03 rivet were used for hybrid joints. While failure loads of the bonded and hybrid joints increased as the overlap length increased, failure loads of the rivetted joints were not affected by the overlap length. Effect of the stacking sequence was not remarkable in the simple bonded or rivetted joints. Failure loads of the hybrid joints, however, showed the maximum of 30% difference depending on the stacking sequence. Major failure mode of the bonded and hybrid joints was the delamination of the composite adherend and failure mode of riveted joints was the rivet failure with local bearing.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.203-209
• /
• 2020

A hybrid mount featuring rubber element and piezoelectric actuator is devised to reduce vibration when starting a vehicle engine. As a first step, a passive mount adopting rubber element is manufactured and its dynamic characteristics are experimentally evaluated. After evaluating dynamic characteristics of the manufactured inertial piezoelectric actuator, the proposed hybrid mount is then established by integrating the piezoelectric actuator with the rubber element for performance improvement at non-resonant high frequencies. A mathematical model of the established active vibration control system is formulated and expressed in the state space form. Subsequently, sliding mode controller (SMC) is designed to attenuate the vibration transmitted from the base excitation. Finally, control performances of the proposed hybrid mount are evaluated such as transmissibility in frequency domain and time responses.