• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.4
• /
• pp.484-491
• /
• 2018

Tooth agenesis is a common human dental anomaly and the agenesis of mandibular second premolars has been proven to be the most frequently observed. The aim of this study is to investigate tooth agenesis and delayed tooth development in patients with agenesis of mandibular second premolars. This study reviewed 9 to 15 year-old patients with agenesis of mandibular second premolars who visited the department of pediatric dentistry of Yonsei University Dental Hospital and took panoramic radiographs from January 2014 to December 2016. On panoramic radiographs, agenesis of teeth was observed and developmental delay of teeth was evaluated by the Nolla method. Among 125 patients with agenesis of mandibular second premolars, 58 patients (46.4%) showed agenesis of other teeth and 38 patients (30.4%) showed delayed tooth development. In this study, patients with agenesis of mandibular second premolars were more likely to have tooth agenesis or delayed eruption of other teeth.

• Journal of Oral Medicine and Pain
• /
• v.17 no.1
• /
• pp.73-87
• /
• 1992

저자는 28명의 측두하악장애 환자와 31명의 정상인을 대상으로 최적기능교합의 개념에 입각하여 교합시의 치아접촉점을 동적이며 정량적인 방법으로 평가하여 교합안정장치의 사용으로 인한 교합안정성의 개선여부를 알아보고자 하였다. 이와 동시에 교근과 전측두근의 활성도를 측정하여 치료의 경과에 따른 근활성의 변화를 알아보기 위해 본 연구를 시행하였다. 측정항목은 개구범위, 두개하악장애지수, 치아접촉점 좌우균형치, 치아접촉점 전후균형치, 치아접촉점 평균시간간격, 치아접촉점의 개수, 접촉시간, 좌우측 교근과 좌우측 전측두근의 근활성, 근활성 비대칭 지수 등이었다. 이의 측정을 위해 T-Scan System, K-6 Diagnostic System 그리고 EM 2등을 사용하였으며 얻어진 자료에 대해 검정한 후 다음과 같은 결론을 얻었다. 1. 교합안정장치를 이용하여 측두하악장애 환자들을 4주간 치료한 결과 전반적인 임상증상이 호전되어 개구범위와 두개하악장애지수에 있어서 뚜렷한 개선이 있었다. 2. 측두하악장애 환자에서 최대 악물기시의 치아접촉점 좌우균형치및 평균시간 간격이 큰 것으로 나타나 치아접촉이 일어나는 순간의 교합안정성이 좋지 않은 것으로 평가되었다. 3. 치료 4주후 교하안정장치를 장착한 상태에서 측정한 치아접촉점 좌우균형치및 치아접촉점 평균시간간격은 치료전에 비해 개선된 것으로 나타났다. 4. 치료 4주후 치아접촉점의 전후방 분포가 구치부위로 이동되는 양상을 보였다. 5. 측두하악장애 환자에서 최대 악물기시의 좌우측 교근 및 전측두슨의 근활성은 정상인에 비해 낮에 나타났으며, 이는 치료기간 동안 감소되는 경향을 나타내었다. 6. 측두하악장애 환자에서 전측두근의 근활성 비대칭지수는 정상인에 비해 상당히 높게 나타났으며 이는 치료기간 동안 감소되는 경향을 나타내었다.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.61-74
• /
• 1998

The Purpose of this study was to investigate the stress distribution and tooth displacement at the initial phase produced by 5 types of molar uprighting springs using finite element method. The three dimensional finite element model of lower dentition, bone and springs was composed of 5083 elements and 2071 nodes. The results were as follows: 1. In case of helical spring and root spring, intrusion of lower canine and first premolar were observed md distal tipping, translation and extrusion of lower second molar were observed. 2. In case of T-loop, modified T-loop and box loop, intrusion and distal translation of lower second premolar were observed, and the largest crown distal tipping and translation of lower second molar were observed in T-loop and the smallest were observed in box loop. 3. In case of T-loop with cinch-bact crown distal tipping and translation of lower second molar were decreased, but extrusion was also decreased. 4. With increase of activation in T-loop, mesial translation and won distal tipping of lower second molar were increased and edentulous space was closing, but distal translation of second premolar was also increased. 5. With increase of tip-back bend in T--loop, distal tipping and translation of lower second molar were increased, but extrusion was also increased more largely.

• 대한치과보철학회:학술대회논문집
• /
• 2000.11a
• /
• pp.66-67
• /
• 2000

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.84-88
• /
• 2009

Tooth impaction refers to situations where a tooth fails to erupt due to mechanical blocking and remains unerupted beyond the normal time of eruption. It is commonly found in permanent dentition, but rarely in deciduous dentition. Tooth impaction is caused by systemic or local factors, and most common etiology is odontoma. Odontoma is also commonly found in permanent dentition, and rarely in deciduous dentition. We are presenting case of 4 year and 4 month year old girl, who had impacted and disto-angulated lower left deciduous second molar due to odontoma. We removed odontoma and performed orthodontic traction of impacted lower left deciduous second molar. Then, the impacted primary molar was erupted and acceptable occlusion was obtained.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.981-989
• /
• 1998

Positions, angulation and mesiodistal dimension of lower incisors are important in esthetics, occlusion and post-treatment stability of tower arch. When lower incisor is congenitally missing, problems such as increased overjet and overbite, closing in of adjacent teeth and size/space discrepancies may occur. When creating treatment plans, incisor position and angulation, lip support, anteroposterior skeletal relationship canine-molar relationship, overjet overbite, remaining growth potential, crowding and anterior tooth ratio have to be considered. For an accurate analysis of incisal size discrepancy, diagnostic model set-up may be helpful. The two patients in this presentation both had two lower incisor missing, but the degree of crowding, skeletal relationship, lip support, molar relationship are different and therefore treatment plan was different as well. Long term follow-up may be necessary for stability and retention.

• Journal of dental hygiene science
• /
• v.6 no.1
• /
• pp.29-34
• /
• 2006

This study was undertaken to compare the tooth and arch size between crowding patient and normal subjects. Two group of dental casts were selected on the basis of crowding patients and normal subjects. One group, consisting of 40 pair of dental casts(20 male and 20 female), exhibited noncrowded dentitions. A second group, consisting of 40 pairs of dental cast(21 male and 21 female), exhibited remarkably crowding need for orthodontic treatment. Tooth width measurements were made with a sliding digital caliper with Vernier scale neared 0.01 mm. Mean, standard deviation, T-test of the following parameters were used to compare two group : individual mesiodistal crown widths, arch width and arch length. The following result were obtained. In the mesiodistal crown widths, normal subjects had generalized larger teeth than Wheeler's results(human tooth size index), except for maxillary central incisor, maxillary 2nd premolar, mandibular canine, and mandibular 1st molar. In the orthodontic patients with crowded dentitions, the mesiodistal tooth crown widths were generalized larger teeth than noncrowded normal subjects. In the arch width and arch length, the crowded dentition group had smaller arch width and arch length than the normal group.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.47-59
• /
• 2016

Purpose: The aim of this study was to investigate the changes in occlusal force after loss of the lower first molar depending on the inclination and extrusion of the adjacent and opposing teeth by using a strain gauge. Materials and Methods: Anatomic teeth were used to reconstruct the normal dental arch with loss of the lower right first molar. A uniformly thick layer of silicone was applied to the root to mimic the periodontal ligament. Four stages of dies with varying degrees of inclination and extrusion of the adjacent and opposing teeth were constructed and attached to master model interchangeably by using a CAD/CAM fabricated customized die system. The strain gauges were attached to teeth and a universal testing machine was used to determine the changes in occlusal force. An independent t-test and one-way ANOVA were performed (${\alpha}=.05$). Results: While simulating chewing food, the upper first, second premolar and lower second molar showed greater occlusal force than before extraction. When the change of adjacent teeth's occlusal force with their progressive movement after molar loss was evaluated, the difference among four die models was significant and was in the decreasing aspect (P < 0.05). Conclusion: When the lower first molar was lost and the adjacent teeth did not move yet, the occlusal force in adjacent teeth was higher than that when the lower first molar still existed. In addition, the occlusal force in the upper premolars and lower second molar decreased significantly with the progressive movement of adjacent teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.340-347
• /
• 2022

Distal displacement of the tooth germ of the mandibular second premolar (MnP2) leads to its impaction and obturation of the eruption path of the mandibular first molar delaying its eruption. The present case report describes the treatment of 2 cases of eruption guidance for distally displaced developing MnP2 that caused delayed eruption of the mandibular first molar. Intentional extraction of primary predecessor results in the mesial shift of the displaced MnP2. However, unfavorable distal ectopic eruption of the mandibular first premolar after the premature loss of primary second molar has been previously reported. Hemisection and sequential extraction of the mandibular primary second molar were performed to mesially shift the distally displaced MnP2, while preventing unfavorable distal ectopic eruption of the mandibular first premolar.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.421-427
• /
• 1995

두개하악장애는 저작근, 측두하악관절 및 그와 관련된 구조물의 많은 임상적인 문제를 포함하는 포괄적인 용어이다. 두개하악장애의 원인은 다양하고 종종 다인성이며 위험을 증가시키는 여러가지 소인들이 존재한다. 이갈이나 이악물기 같은 이상기능습관은 흔하며 또한 임상적으로 많은 관련이 있는 것으로 사료된다. 그러나 이전의 연구에서는 연령증가에 따른 기능적 마모를 고려한 치아교모에 관한 연구가 시행되지 않고 단순한 교모도의 평가비교만이 시행되었다. 본 연구는 법치의학적 연령감정에서 널리 사용되고 있느 치아교모도를 이용한 연령감정법을 이용하여 두개하악장애환자의 치아교모도에 관한 연구를 시행하였다. 연령은 기능적마모에 따른 정도를 평가하기 위해서 고려되었다. 단국대학교 치과병원 구강내과에서 두개하악장애로 진단된 환자18명과 대조군으로 외래환자 14명을 대상으로 하였다. 연령차는 연령감정법의 추정연령과 환자의 실제나이의 차이를 구해서 비교분석하였다. 이상의 결과로 두개하악장애환자의 중절치, 측절치, 제1소구치, 제2소구치의 치아교모도가 정상군보다 유의성 있게 높았다.