• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.63-68
• /
• 2017

Maintenance of sewer pipe process sewer pipe repairing process is necessary for deterioration of sewer pipe. In this research, analysis on performance (strength and twist strain) of eco-friendly and even expanded liner process using glass fiber and twist prevention band. As a results, tensile strength, bending strength and failure load is increased after the sewer pipe repairing process than advanced research results. And sewer pipe after the this process obtained advantage of prevention of twist strain and economic. After the this research, sewer pipe repairing process using glass fiber and twist prevention band could be suggest the eco-friendly and effective sewer pipe repairing process.

• Bulletin of Korea Environmental Preservation Association
• /
• v.28 s.361
• /
• pp.6-6
• /
• 2006

하수관거는 생활환경의 개선, 공중위생의 향상, 침수의 방지, 공공수역의 수질보전 및 건전한 물순환 등을 유지하기 위하여 반드시 필요한 도시기반시설이다. 우리나라는 도시민의 쾌적하고 안전한 생활을 확보하기 위하여 하수관거를 지속적으로 부설하였지만 '03년말 기준 전국의 보급률이 65.8%에 불과하고, 설치된 관거도 8.6m당 1곳이 불량하고, 하수관 유량의 31%가 침입수여서 하수관거 개선이 시급한 실정이다. 정부에서는 하수관거정비 종합투자계획을 수립ㆍ하수관거 개보수사업을 적극적으로 추진하고 있다. '07년까지 5조 6천억원을 투자하여 하구관거보급률을 75%수준으로 향상시켜 하수처리장 운영효율 제고 및 수계별 목표 수질 달성에 기여 할 것으로 전망하고 있다. 하수관거정비는 시민 및 사회단체의 환경을 향상시키는 반면에 많은 예산과 장기간이 소요되는 사업이다. 그동안 민간자본을 이용하여 하수처리장 건설 등 환경기초시설 설치 등에 활용되어 왔던 BTO 방식에서 탈피하여 BTL(건설-이전-임대)방식을 도입하여 추진하게 된다. 이에 본지에서는 하수관거정비사업의 현황, 향후 추진방향 등에 대하여 자세히 살펴 보고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4322-4327
• /
• 2015

Improper backfill materials and compaction controls under pipelines have become one of the major causes of failure in many sewage pipeline systems. A study on backfill materials and compaction controls has been considered for a long time. However, structural supporters under the pipe were recently concerned because of pipeline repair and maintenance. This paper presents a prefabricated plastic foundation for supporting a sewage pipe system and increasing the performance function of the pipes. Several analytical models for the plastic foundations were investigated using finite-element program, ABAQUS, for checking safety. Comparing with the results of analyses, some of economic design sections based on the sizes of pipe diameters, 600mm, 700 and 600mm, were evaluated. These results could be applied to a pipeline system with a prefabricated plastic foundation with respect to pipe diameters and buried depths.

• The Safety technology
• /
• no.182
• /
• pp.16-18
• /
• 2013

강원도 춘천시에 최근 새로운 변화의 바람이 불고 있다. 우 오수관로를 신설하고 재정비함으로써 하수관거의 기능을 개선하고 하수처리장의 운영효율을 증대시키는 공사가 대대적으로 펼쳐지고 있는 것이다. 2015년 1월, 이 사업이 완료되면 춘천시는 방류 수역 수질개선으로 악취가 저감되고 쾌적한 환경이 조성되는 등 지역주민의 생활환경이 크게 개선되는 효과를 얻을 수 있다. 더불어 효율적인 하수관 유지보수체계도 구축할 수 있게 된다. 사실상 더욱 살기 좋은 춘천시의 등장이 임박한 것이다. 이런 행복한 변화를 만들어내고 있는 주인공은 바로 '코오롱글로벌'이다. '코오롱글로벌 춘천시 하수관거정비 임대형민자사업현장'은 춘천시를 전국 제일의 행복도시로 만들겠다는 신념으로 시공에 임하고 있다. 때문에 공사의 품질을 좌우하는 '안전'에 만전을 기하고 있다. 철저한 안전관리를 통해 춘천을 최고의 주거환경을 갖춘 도시로 변화시키고 있는 이곳 현장을 찾아가 봤다.

• Journal of Korea Water Resources Association
• /
• v.41 no.2
• /
• pp.127-135
• /
• 2008

The objective of sewer rehabilitation is to improve its function while eliminating inflow/infiltration (I/I) and insufficient carrying capacity (ICC). Such rehabilitation efforts, however, have not been particularly successful due to a lack of sewer data and unsystematic field practices. The present study aimed to solve these problems by developing a decision making model consisting of two models: the rehabilitation weighting model (RWM) and the rehabilitation priority model (RPM). In RWM, the I/I of each pipe in a drainage district is estimated according to various defects, with each defect given an individual weighting factor using an analytic hierarchy process (AHP). RPM determines the optimal rehabilitation priority (ORP) using a genetic algorithm (GA). The developed models can be used to overcome the problems associated with unsystematic practices and, in practice, as a decision making tool for urban sewer system rehabilitation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.57-62
• /
• 2020

Among the sewage pipes installed in Korea, the length of concrete pipes exceeding 20 years is 66,334 km (42.5%). Deteriorated concrete sewer pipes need to be repaired due to the leakage of internal sewage, which causes problems such as sink holes by expanding the cavity around the pipeline. In this study, we tried to apply anti-washout underwater mortar with ultra rapid hardening cement and segregation reducing agent to sewage pipe repair. As a result of the setting time test, the final set time was delayed by up to 172% by incorporating segregation reducing agent. In the test for measuring the degree of mortar segregation in water, it was measured at pH 12 or less under all mixing conditions. In addition, the suspension amount was measured to be 50 mg / l or less to satisfy the KCI-AD102 standard by incorporating a segregation reducing agent. In terms of the average value of mortar compressive strength, by incorporating segregation reducing agent, the strength of the specimens produced in air was more than 80% of that of the specimens produced in water. Conversely, the bond strengths of the specimens produced in water were measured to be higher than those of the specimens produced in air. Water resistance was evaluated by measuring water absorption and water permeability. Water absorption and water permeability were reduced by 42.6% and 36.6%, respectively, by mixing segregation reducing agent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05b
• /
• pp.991-994
• /
• 2003

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.1
• /
• pp.53-62
• /
• 2006

This study was carried out to obtain quantities of infiltration, inflow and exfiltration on sewer pipes of three areas at a small city. From the results, the most investigated sewer pipes should be infiltrated by underground water and undetermined water. Flowrate commonly showed two peak at 6 to 8 a.m. and 6 to 9 p.m. and which may be influenced by the sewer flowrate with washing or bathing time. BOD/TN ratio of below 4.0 were inferior as compared with proper criteria 5.1. Infiltration/inflow rates of three areas were 21.7% and $0.08m^3/km$ of A, 12.4% and $0.015m^3/km$ of B, 22.4% and $0.021m^3/km$ of C, respectively. This indicates that infiltration/inflow rate of A was obviously greater than that of B and C. Also, these results show that we can conduct sewer maintenance in good order as A, C and B zone.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.147-157
• /
• 2012

Recent studies on development of level of service (LoS) for separated sewer pipe have simply shown high-level of LoS from the perspective of users and financial/social/economical factors, which results in poor connectivity to real maintenance work. The objective of this study is to develope the evaluation indicators of level of service in the manner of function by analyzing the separated sewer pipes with FAST, function analysis systems technique, used in value engineering. The evaluation indicators suggested in this study include all the functions of separated sewer pipes and show an advantage of focused function maintenance. Moreover, developed indicators help to manage archival history and to perform asset management effectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.445-448
• /
• 2008

The unsaturated polyester(UP) and epoxy resin have a superior material properties and a chemical resistance using sewerage pipes rehabilitation. However, UP and epoxy have not a low temperatures harding, the requirement $8{\sim}11$ hours long times harding and heating system used by reinforcement liner. This study is to evaluate the effects of low temperature harding properties methyl methacrylate(MMA) monomer using expanded polystyrene(EPS) and UP in addition of initiator and promoters. From the test result, viscosity tends to increase with increasing EPS and UP contents. However, harding time change of the MMA resins which it follows in addition of the initiator and promoter.