• New & Renewable Energy
• /
• v.8 no.4
• /
• pp.30-37
• /
• 2012

Biodiesel was produced by "transesterification" of vegetable oils and animal fats as an alternative to petroleum diesel. The research analysed the fuel characteristics of biodiesel, the yield of by-products and biodiesel, using several vegetable oils - rapeseed oil, camellia oil, peanut oil, sesame oil, perilla oil, palm oil, olive oil, soybean oil, sunflower oil and animal fats such as lard, tallow, and chicken fat. The results showed the yields of biodiesel made from the vegetable oils and animal fats were $90.8{\pm}1.4{\sim}96.4{\pm}0.9%$ and $84.9{\pm}1.1{\sim}89.6{\pm}1.5%$ respectively. Production rates and oxidation characteristics were different depending on the fats applied.

• New & Renewable Energy
• /
• v.8 no.4
• /
• pp.38-43
• /
• 2012

Biodiesel is non-petroleum based fuel produced from vegetable oils or animal fats through transesterification. The compositions of saturated and unsaturated fatty acids in the feedstocks are important factors for biodiesel quality in terms of low-temperature fluidity and oxidative stability. The goal of this study is to improve the cold flow property of biodiesel from vegetable and animal origin containing highly saturated methyl esters (approx. 50%). In this purpose poly-saturated methyl esters in palm and tallow biodiesel were removed via urea-based fractionation and then the recovered fractions (enriched unsaturated fatty acid methyl esters) were supplemented with cold flow improvers. The highest concentration of unsaturated fatty acid methyl esters (93.8%) was obtained using a urea/fatty acid ratio of 3:1 at the crystallization temperature of $0^{\circ}C$ for 17 hours in incubation, with recovery of 71% and the addition of cold flow improver (Flozol$^{(R)}$ 515, 3,000 ppm) to the enriched poly-unsaturated fatty acid methyl esters reduced the CFPP(cold filter plugging point) of palm biodiesel from $12^{\circ}C$ to $-42^{\circ}C$. In tallow biodiesel both the enrichment of unsaturated fatty acid methyl esters (93.71%) and the addition of cold flow improver (Infineum R408, 3,000ppm) reduced the CFPP from $10^{\circ}C$ to $-32^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.35-48
• /
• 2013

Biodiesel is an alternative diesel fuel which can be obtained from the transesterification of vegetable oils, animal fats and waste cooking oil. The objective of this study is to evaluate the properties of biodiesel obtained from different feedstocks (soybean, waste cooking, rapeseed, cottonseed and palm oils). The biodiesel derived from different feedstocks was analyzed for FAME (fatty acid methyl esther) content, kinematic viscosity, flash point, CFPP (cold filter plugging point) and glycerin content. The quality of biodiesel was tested according to the Korean and European standard (EN14214, requirements and test method for biodiesel fuel). The biodiesels derived from soybean, waste cooking, rapeseed and cottonseed oils contain high amount of unsaturated fatty acid, while palm biodiesel is dominated by saturated fatty acid. The fuel properties of biodiesel, such as low temperature performance, kinematic viscosity and oxidation stability are correlated with the FAME composition components in biodiesel.

• Korean Journal of Plant Resources
• /
• v.26 no.5
• /
• pp.628-635
• /
• 2013

In order to evaluate their potential as sources of biodiesel, oil content and fatty acid composition of seeds and fatty acid methyl ester (FAME) properties from seven woody oil plants in Korea were analysed. The oil content of seed of all woody plant species ranged from 15.1 (Ligustrum lucidum) to 70.3% (Camellia japonica) by dry weight. Fatty acid composition consisted mainly of oleic acid, linoleic acid, linolenic acid, palmitic acid and stearic acid, with oleic acid being the most abundant. The content of unsaturated fatty acids of all species was higher than saturated fatty acids. Oxidation stability of seed oils of all woody plants ranged from 2.25 to 8.62 hours/$110^{\circ}C$. Fatty acid methyl ester of Styrax japonica has been found to have the highest iodine value, indicating that unsaturated fatty acid content is higher than other seed oils. Cold filter plug point(CFPP) was varied over a wide range from $0^{\circ}C$ to $-13^{\circ}C$. The cold fluidity of FAME of Chionanthus retusa were excellent.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.497-503
• /
• 2008

A variety of techniques has been employed in order to reduce problems caused by the crystallization of paraffin and saturated fatty acid esters in diesel fuel containing biodiesels. Methacrylate copolymers are known as additives which reduce the pour point and cold filtering plugging point (CFPP) of diesel fuels. This paper describes the synthesis, characterization and low temperature properties, having as an initial step the synthesis of the alkyl methacrylate monomers by esterification of methacrylic acid with C12, C18, and C22 fatty alcohols. The copolymerization of these monomers with styrene was then performed, with molar ratios of 30:70, 50:50 and 70:30 for styrene:alkyl methacrylate. All copolymers were characterized by $^1H-NMR$, FT-IR, and gel permeation chromatography (GPC). The poly(styrene-co-alkyl methacrylate)s (PStmSMAn) leads to a large reduction in the pour point and CFPP of poly(styrene-co-alkyl methacrylate) in ultra low sulfur diesel (ULSD) and BD5 with treated 100~5000 ppm of poly(styrene-co-alkyl methacrylate). BD5 fuel containing 5000 ppm of the copolymer (PSt82SMA18) showed a $25^{\circ}C$ and $9^{\circ}C$ reduction in their pour points and CFPP, respectively.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.194-199
• /
• 2008

In this study, the effective method to esterify the free fatty acids in jatropha oil was examined. Compared to other plant oils, the acid value of jatropha oil was remarkably high, 11.5 mgKOH/g. So direct transesterification by a base catalyst was not suitable for the oil. After the free fatty acids were esterified with methanol, jatropha oil was transesterified. The activities of four solid acid catalysts were tested and Amberlyst-15 showed the best activity for the esterification. After constructing the experiment matrix based on RSM and analyzing the statistical data, the optimal esterification conditions were determined to be 6.79% of methanol and 17.14% of Amberlyst-15. After the pretreatment, jatropha biodiesel was produced by the transesterification using KOH in a pressurized batch reactor. Jatropha biodiesel produced could meet the major specifications of Korean biodiesel standards; 97.35% of FAME, 8.17 h of oxidation stability, 0.125% of total glycerol and $0^{\circ}C$ of CFPP.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.762-767
• /
• 2009

In this study, the feasibility of using vegetable oil extracted from tropical crop seed as a biodiesel feedstock was investigated by producing biodiesel and analysing the quality parameters as a transport fuel. In order to produce biodiesel efficiently, two step reaction process(pre-treatment and transesterificaion) was required because the tropical crop oil have a high content of free fatty acids. To determine the suitable acid catalyst for the pre-esterification, three kinds of acid catalysts were tested and sulfuric acid was identified as the best catalyst. After constructing the experimental matrix based on RSM and analysing the statistical data, the optimal pre-treatment conditions were determined to be 26.7% of methanol and 0.982% of sulfuric acid. Trans-esterification experiments of the pre-esterified oil based on RSM were carried out, then discovered 1.24% of KOH catalyst and 22.76% of methanol as the optimal trans-esterification conditions. However, the quantity of KOH was higher than the previously established KOH concentration of our team. So, we carried out supplemental experiment to determine the quantity of catalyst and methanol. As a result, the optimal transesterification conditions were determined to be 0.8% of KOH and 16.13% of methanol. After trans-esterification of tropical crop oil, the produced biodiesel could meet the major quality standard specifications; 100.8% of FAME, 0.45 mgKOH/g of acid value, 0.00% of water, 0.04% of total glycerol, $4.041mm^2/s$ of kinematic viscosity(at $40^{\circ}C$).