• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.55-61
• /
• 2016

Recently developed ferritic heat resistance steel, T24 was used to evaluate microstructure characteristics of simulated heat affected zone. Also, correlation between the prior austenite grain size and amount of $M_{23}C_6$ carbide dissolution was discussed. With the increasing of peak temperature, Grain size steadily increased up to $1050^{\circ}C$ and then rapidly increased at $1150^{\circ}C$. Of the peak temperature $950{\sim}1050^{\circ}C$, amounts of $M_{23}C_6$carbide dissolution are low. But Most of $M_{23}C_6$ carbide that is inhibited grain growth were dissolved above $1050^{\circ}C$ and decreased volume fraction of carbide. This indicates that grain growth may be achieved through dissolution of carbide in the base material. As of welding, due to very rapid heating rate, $M_{23}C_6$ carbide exists above equilibrium solution temperature that is $800^{\circ}C$, even at $1050^{\circ}C$. So, It was confirmed that close correlation between carbide dissolution in the base material and grain growth. Calculated grain size has a linear relationship with peak temperature, on the other hand, measured grain size discontinuously increased between $950{\sim}1050^{\circ}C$ and above $1050^{\circ}C$. Grain size of heat affected zone at $1350^{\circ}C$ peak temperature showed maximum 67um and minimum 4um. Also, The number of side showed 3 to 10.

• Journal of Digital Contents Society
• /
• v.15 no.5
• /
• pp.643-650
• /
• 2014

This study deals with the effects of the extension of terrestrial TV VOD holdback on the viewing behavior focusing on IPTV & digital cable TV. And this study presents the implication by analyzing a time series trend of the digital media service. Thus researcher has analyzed the VOD performance trend of IPTV & digital cable TV, based on the real data of media player's internal fact sheet. First, researcher confirmed that the repetition of the peak value goes to January and August seasonally. Also, it was confirmed that the viewing rate of terrestrial broadcasting companies is affected by the hit drama program. And researcher confirmed that the terrestrial VOD, movie and kids VOD, and terrestrial VOD purchases is falling down by analyzing a time series relationship. Terrestrial broadcasting companies did an extension of the holdback for the purpose of trying to increase the viewership of the broadcast, but it was confirmed that it was reduced both purchasing desire VOD viewing and viewing of the broadcast audience rather. Thus the researcher expect the customer familiar policy of media players in the future.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.475-481
• /
• 2002

Blend films of poly(3-hydroxybutyric acid) (PHB) with chitosan were prepared, and their Physical properties and crystallization were investigated. The degree of crystallinity of PHB/chitosan films by X-ray diffraction decreased with increasing chitosan concentration. In the fourier-transformed infrared spectra, carbonyl peak of PHB became lower with increasing the amount of chitosan. The addition of chitosan to PHB film decreased thermal stability and crystallinity of the blend films. The granular sizes of the films were reduced with the addition of chitosan to the film in the microstructural observation by a scanning electron microscope. Mechanical properties, including tensile strength and percent elongation, of the blend films increased with increasing chitosan ratio in the films. For color of the films, L and b values generally decreased with increasing chitosan ratio, but transparency of the films increased.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.87-94
• /
• 2008

This parer presents the soil ionization phenomena and parameters associated to characterize the transient performances of grounding system under lightning impulse Currents. Ionization properties in occurring some soil media were experimentally investigated. The cylindrical test cell was employed in order to facilitate the analysis of soil breakdown field intensity and ionized radius. The soil breakdown field intensity, dependence of impedance on the amplitude of impulse current, V-I curves and transient impedances were discussed based on the voltage and current oscillograms. It was found that the ionization process and dynamic behaviors were strongly dependent on the types of soil and two current peaks were not observed in highly water-saturated soils. The results presented in this paper will provide useful information on the improvement of transient performance of a grounding system subjected to lightning impulse Current considering the soil ionization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.275-280
• /
• 2007

A turbine stage consists of stators and rotors. The stator provides the required inlet flow conditions so that the rotor can produce the necessary power. Passing wakes generated from the trailing edge of the stator make an interaction with the rotor. In the present study, this flow mechanism is investigated using the numerical analysis. In case of a large gap distance between the stator and rotor, the flow can be solved independently. First, only the stator flow field is solved. Second, the rotor flow field is solved including the passing wake characteristics obtained from the stator analysis. The passing wake experiences the shearing as it approaches to the rotor blade leading edge. And it is chopped when it strikes the rotor blade. After that, the chopped wakes becomes the prolongation as it travels downstream. The flow according to the variation of the gap distance is also studied. Pressure jumps due to the passing wakes result in the pressure and lift loss and it gets stronger with the closer gap distance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.200.2-200.2
• /
• 2013

Yttrium (Y)이 도핑 된 ZnO 나노 구조물을 수열합성법으로 제작하였다. 먼저 졸겔법으로 SiO2/Si 기판 위에 seed layer (Y-doped ZnO ; Y0.02Zn0.98O)를 제작하였으며 5번의 코팅을 진행하여 박막의 두께는 약 180 nm로 측정이 되었다. 그 후 진공 분위기에서 RTA를 이용하여 $500^{\circ}C$에서 3분간 열처리가 진행되었다. 이어서 수열합성법으로 mole 농도를 0.5~1.0 M 범위에서 변화시키며 YZO 시료를 제작하였다. X-ray diffraction (XRD)을 통해서 Y2O3 또는 결함과 관련된 피크는 관찰이 되지 않았으며, 모든 구조물에서 압축응력이 존재하는 알 수 있었으며, field emission scanning electron microscope (FESEM)에서 나노 구조물의 크기와 형태는 수열합성법의 mole 농도에 많은 영향을 받는 것으로 나타났다. Hall effect 측정을 통해서 모든 구조물은 n-type 전도 특성을 가지는 것으로 나타났다. 또한 광학적 특성인 photoluminescence (PL)에서는 수열합성법의 화학식을 고려할 때 Zn가 rich한 상태에서는 Zn interstitial로 존재하는 것으로 나타났고, mole 농도가 높아 질수록 free exciton에 의한 재결합인 UV emission이 우세하게 나타났다.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1188-1195
• /
• 1999

The effect of aluminosilicate sol on the formation of mullite layer in zircon shell mold was investigated. Aluminosilicate sol was prepared by mixing of colloidal silica(NALCO(R) 1130) and an aqueous solution of aluminium nitrate at room temperature. The sol gelled at 50$^{\circ}C$ for 48 hrs. It was identified that the gel consists of aluminosilicate complexes and gibbsite. The coordination number of all aluminium ion bonded with silicon ion was four. Mullite phase formed by sintering above 1300$^{\circ}C$. XRD peak of mullite sharpened with increasing sintering temperature and the content of aluminium nitrate. Mullite phase displayed whisker-like 0.5~5${\mu}m $ particles. Separation between 1st and 3rd layers during sintering and the difference in thermal expansion coefficient between residual silica and mullite.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.783-791
• /
• 1994

Piezoelectric ZnO thin films were deposited on 7059 glass substrate by rf magnetron sputtering. The effects of deposition parameter, such as rf power, gas pressure and $O_{2}$/Ar gas ratio, on the crystallinity and electrical properties of the deposited ZnO thin films were studied. It was found that the deposition rate was higher than the previously reported values. ZnO films were suitable for SAW filter since a standard deviation of XRD (002) peak rocking curve was less than $6^{\circ}$. ZnO thin films, which were deposited at $O_{2}$/Ar ratio larger than 25%, showed high resistance. SAW filter was fabricated using ZnO film, of which thickness was 0.25 of the wavelength of the propatating surface acoustic wave. The measured frequency response was consistent with the calculated one. The SAW filter had center frequency 39.08 MHz, phase velocity 2501 m/sec and insertion loss 29 dB.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.49-56
• /
• 2006

The waste tire powder is modified with allylamine in the presence of ultraviolet radiation and the influence of surface modification on the thermal and rheological properties of polypropylene/waste tire powder composites was investigated. X-ray diffraction studies of PP/waste tire powder composite without compatibilizer, such as maleic anhydride-g-polypropylene (MA-PP), shows the increase in peak intensity of ${\beta}$ crystalline peaks, whereas it completely disappears in the presence of the MA-PP. Differential scanning calorimetry results further supported the above fact. The melt viscosities and storage modulus of the composites with modified waste tire powder show higher value than that of composites with unmodified powder and it is attributed to the interaction between amine group on modified powder surface and maleic anhydride of MA-PP.