• The Journal of Bigdata
• /
• v.5 no.1
• /
• pp.227-239
• /
• 2020

This paper introduces a method for predicting the maximum power demand despite communication errors in industrial sites. Due to the recent policy of de-nuclearization in Korea, the price of electricity is inevitable, and the amount of electricity used and maximum load management for the management of power demand are becoming important issues. Accordingly, it is important to predict and manage peak power. However, problems such as loss and modulation of measured power data occur at industrial sites due to noise generated by various facilities and sensors. It is difficult to predict the exact value when measured effective power data are lost. The study presents a model for predicting and correcting anomalies and missing values when measured effective power data are lost. The models used in this study are expected to be useful in predicting peak power demand in the event of communication errors at industrial sites.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.763-770
• /
• 2002

Recognition of CW Morse signals can be divided into several phases such as detection of tones and spaces, signal processing for removing noise from detected signals, decision of tones/spaces, mapping a sequence of tones and spaces into characters, error correction of a character message with textual repetition. In this paper, in order to cope with signal fading effectively we propose a signal detection method of identifying peaks in the frequency domain and present techniques for combining multiple frequency peaks and for removing residual signal components and noise. LMS adaptive method is applied for decision of tones/spaces, and initial value setting and malfunctioning conditions are analyzed. In recognition experiments, we used CW Morse signals collected by radio receivers and found that the proposed method achieves good recognition performance even in severe fading conditions.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2020

This study aimed to investigate responses of plant growth and photosynthesis to different kinds of covering materials with selective light transmit for red leaf lettuce (Lactuca sativa L.). Experimental pot design was attached UV blocking filter, red filter, blue filter, and green filter. The kinds of covering materials showed significant results for plant growth especially control, UV blocking filter, and red filter. The photosynthetic rate and anthocyanin content of red leaf lettuce were higher in control and UV blocking filter than others. The quality of red leaf lettuce was low in red, green, and blue film treatments because of too low anthocyanin content.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.5-18
• /
• 1997

Anisotropy in strength and deformation characteristics of isotropically consolidated sande prepared by pluviating through air was studied by plane strain compression tests. Seven types of sand of the world-wide origins were tested, which have been extensively used for research purposes. The strains for direction of bmazimum principal stress and direction of minimum principal strews were measured continuously from $10^{-6}\; to 10^{-2}$. The following results were obtained for all sands. The behaviour at strains leas than about 0.001% was elastic and isotropic regardless of the angle $\delta\; of\; the\;\sigma$ direction relative to the bedding plane. However, the sands became gradually more anisotropic as the strain increased to the extent exceeding the elastic limit. The peak strength was noticeably anisotropic with a similar trend. Thus, the angle of internal friction $\phi\; decreased \;as\;\delta$ decreased from $90^{\circ}$, and the ratio of the smallest to largest values of was between 0.82 and 0.90. The l has a minimum at $\delta=0^{\circ}~30^{\circ}$ depending on the hypes of sand. The residual strength became isotropic again.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.1
• /
• pp.47-53
• /
• 1994

The effects of light on the production of anthocyanin and betacyanin in cell suspension cultures of Vitis vinifera and Phytolacca americana were investigated. The cell growth of V.vinifera was little affected by exposure to light, but that of P.americana was markedly increased by light than in the dark In suspension cultures of V vinifera maximum accumulation of anthocyanin was observed during the stationary phase in continuous light By contrast, in suspension cultures of R americana, accumulation of betacyanin occured in parallel with cell division which showed two peaks after 4 days and 8 days of culture in continuous light whereas in continuous dark accumulation of anthocyanin and betacyanin did not occured However treatment of light interrupting for l, 12, and 24 h after 4 days in cell suspension. cultures of remarkably showed a slight anthocyanin accumulation, but after 8 days of culture remarkably accumulated by light interrupting for more than 12 h. In cultures of P. americana, the light treatment was more effective at 4th day than at 7th day after culture, but betacyanin accumulation was decreased again in the dark after light treatment These result indicate that the difference of light responses exist between the V.vinifera and the betacyanin of P. americana though cell suspension culture systems.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• Journal of Radiation Protection and Research
• /
• v.26 no.2
• /
• pp.51-58
• /
• 2001

In the low level radioactivity measurement, such as environmental radioactivity, there were used commonly cylindrical and Marinelli type beakers by means of measurement container. If there are differences in the matrix density or sample height between standard source and sample, it must be determined full energy peak efficiency considering self absorption effect. In this paper, we compared measured efficiency with calculated full energy peak efficiencies in the HPGe detector using the Monte Carlo method. For cylindrical container, we calculated the variation of the efficiency with sample height. Also, we calculated the variation of the detection efficiency with apparent density in the cylindrical and Marinelli container. It was seen that it need to be corrected for self absorption in the energy range of below 1000keV. Also, in order to verify the validity of calculation, we compared the calculated value with reference value using NIST SRM 4353 reference soil.

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.251-254
• /
• 2006

In the current research for natural product with antimicrobial effects, various extracts of Mulberry Leaves against microorganisms were evaluated in terms of the minimum inhibitory concentrations(MIC). In general, Candida albicans was more antimicrobial activity than the other microorganisms such as Streptococcus mutans, Staphylococcus epidermis, and Staphylococcus aureus. The maximum activity was exhibited by ethanol extract of the leaves of Mulberry Leaves against Candida albicans (MIC, $1600{\mu}g/ml$). These results suggest that ethanol and water extracts of Mulberry Leaves have a potential antimicrobial activity.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.783-791
• /
• 1994

Piezoelectric ZnO thin films were deposited on 7059 glass substrate by rf magnetron sputtering. The effects of deposition parameter, such as rf power, gas pressure and $O_{2}$/Ar gas ratio, on the crystallinity and electrical properties of the deposited ZnO thin films were studied. It was found that the deposition rate was higher than the previously reported values. ZnO films were suitable for SAW filter since a standard deviation of XRD (002) peak rocking curve was less than $6^{\circ}$. ZnO thin films, which were deposited at $O_{2}$/Ar ratio larger than 25%, showed high resistance. SAW filter was fabricated using ZnO film, of which thickness was 0.25 of the wavelength of the propatating surface acoustic wave. The measured frequency response was consistent with the calculated one. The SAW filter had center frequency 39.08 MHz, phase velocity 2501 m/sec and insertion loss 29 dB.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.298-303
• /
• 2023

This study aimed to investigate the clinical utility of voiced sentence tasks for voice evaluation. To this end, we analyzed the correlation between perturbation-based acoustic measurements [jitter percent (jitter), shimmer percent (shimmer), Noise to Harmonic Ratio (NHR)] using sustained vowel phonation, and cepstrum-based acoustic measurements [Cepstral Peak Prominence (CPP), Low/High spectral ratio (L/H ratio)] using voiced sentences. As a result of analyzing data collected from 65 patients with voice disorders, there was a significant correlation between the CPP and jitter (r = -.624, p = .000), shimmer (r = -.530, p = .000), NHR (r = -.469, p = .000).This suggests that the cepstrum measurement of voiced sentences can be used as an alternative to the analysis limitations of the pathological voice such as not possible perturbation-based acoustic measurement, and result difference according to the analysis section.