• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.25-34
• /
• 2006

In this paper, a method of designing the pitch control algorithm for the wind turbine generator system (WTGS) and results of nonlinear simulation are presented. For this, the WTGS is treated as a multibody system and the blade element and momentum theory are adopted to model the aerodynamic force and torque acting the rotor blades. For the purpose of controller design, the WTGS is approximated to 1 DOF system using the fact that the WTGS is eventually a constrained multibody system. Then a classical PID controller is designed and used to regulate the rotational speed of the generator. FORTRAN based nonlinear simulation program is written and used to evaluate the performance of the proposed controller at the various wind scenario and operational modes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2011

We have developed the process of forming one body S-type cantilever probe in the recessed trench for fine-pitched MEMS probe card. The probe (cantilever beam and pyramid tip) was formed using Deep RIE etching and wet etching. The pyramid tip was formed by the wet etching using KOH and TMAH. The process of forming the curved probe was also developed by the wet etching. Therefore, the fabricated probe is applicable for the probe card for DRAM, Flash memory and RF devices tests and probe tip for IC test socket.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3558-3562
• /
• 2010

The exact fundamental frequency (pitch) extraction is important in speech signal processing. However the exact pitch extraction from speech signal is very difficult due to the effect of formant and transitional amplitude. So in this paper, the pitch is detected after flattening the spectrum in frequency region by proposed algorithm for minimized harmonics variance value. Experimental result showed the proposed method appeared an outstanding performance in compared with LPC, Cepstrum. Also, the results show the proposed method is better than conventional method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.935-944
• /
• 2015

This study performs the dynamic modeling and the simulation of variable speed wind power system and implements the models of wind speed, wind turbine & PMSG, and MPPT & pitch control as well. The simulation of wind turbine was performed by using the power coefficient and other simulation parameters which were extracted with reference to the commercial 5MW class wind turbine data. As the result of this simulation, MPPT control is confirmed, maintaining the maximum power coefficient as far as the rated speed 12[m/s]. Over 12[m/s] wind speed, this wind power system makes it possible to keep the stable output by controlling the pitch angle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1427-1432
• /
• 2012

As the size of a wind turbine increases, the rotor diameter increases. Rotor blades experience mechanical loads caused by the wind shear and the tower shadow effect. These mechanical loads reduce the life of the wind turbine. Therefore, with increasing size of the wind turbine, wind turbine control system design for the mitigation of mechanical loads is important. In this study, Individual Pitch Control in introduced for reducing the mechanical loads of rotor blades, and a simulation for IPC performance verification is discussed.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.59-69
• /
• 2011

5MW wind turbine is regarded as a promising system for offshore wind farms in the western sea of Korean. And the wind turbine is developed in many companies but not much information is known about it. In this study, aerodynamics and control characteristics depending on several control methods is reviewed on 5MW wind turbine, in which configuration data of the turbine are used from the previous study of NREL. For the calculations, GH_Bladed, which is certificated software by GL, is used and compared with data from FAST code of NREL. This study shows that how much power production, and aerodynamic performances and loads can be obtained with different controls in the operation of 5MW wind turbine, which is expected to be useful in the design of the wind turbine system.

• Journal of Korea Multimedia Society
• /
• v.15 no.6
• /
• pp.784-793
• /
• 2012

Defects of TFT-LCD is detected by thresholding the difference image between the input image and template one because LCD panel has its inherent patterns. However, the pitch corresponding to pattern period is gradually changed according to the distance from the center of camera due to geometric distortion of camera characteristics. This paper presents a method to detect defects through comparing the pitch area with neighbor pitch areas where the perspective transform is performed with the extracted features to correct the distortion. The experimental results show that the performance of the proposed method is very effective for real data.

• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.67-77
• /
• 2000

This paper proposes a reduction scheme for codebook search time in the adaptive codebook using wavelet transformed coefficients. In a CELP coder, pitch estimation with a combined open loop and closed loop search in adaptive codebook needs a lengthy search. More precisely, the pitch search using autocorrelation function over all possible ranges has been shown inefficient compared to the consuming time. In this paper, we propose a new adaptive codebook search algorithm which ensures the same position for the pitch with maximum wavelet coefficient over various scaling factors in Dyadic wavelet transform. A new adaptive codebook search algorithm reduces 25% conventional search time with almost the same quality of speech.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.48-52
• /
• 2005

In this paper, the spectral shape invariant real-time voice change method is proposed to change one's voice to mechanical voice. For this purpose, LPC analysis and synthesis is used to maintain the spectraum of voice and the pitch of synthesis speech can be changed freely. In the proposed method, gain matching method is applied to excitation signal generator to make the changed voice natural to hear. In order to evaluate the performance of the proposed method, voice change experiments were conducted. Experimental results showed that original speech signal is changed to the mechanical voice signal in which context of the speaker's voice is conveyed correctly in spite of drastic change of pitch. The system is implemented using TI TMS320C6711DSK board to verify the system runs in real time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.29-36
• /
• 2017

The paper presents a basic investigation for the development of cleaning technology employing an annular nozzle ejector for application to cleaning water supply and air bubble generation. The quantitative flow characteristics of the primary and suction flows, the qualitative visualization behavior of the mixed jet, and the percentage concentration of pesticide residual at different values of the ejector screw pitch were investigated. It was seen that the primary flow rate increased, while the mass ratio decreased with increase in screw pitch. Further, the mixed jet behaved like a buoyancy jet or horizontal bubbly jet, and the residual concentration of pesticide first decreased and then increased with increase in screw pitch.