• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.489-496
• /
• 1997

This study was carried out to develop and investigate integrated mechanization system on polyethylene(P.E.) film mulching culture in sesame. Field trials were carried out to develop optimum mechanics for each step of manual operation in sesame culture and demonstrated those developed mechanics of sesame dibbling vinyl mulcher, sesame binder, sesame thresher and sesame grader at the farmer, s field of Hwasong (Kyunggi-do) in 1994 and 1995. Newly developed sesame dibbling vinyl mulcher brought saving manpower 280 hrs /ha for sowing and P.E. film mulching with it's 98％ of labour saving for the harvesting operation of sesame. Sesame Binder showed 93％ labour saving for cutting and binding with only 22 hrs /ha compared to 330 hrs /ha that of conventional. Sesame thresher was appeared to have 85％ effects of labour saving for threshing with completely dry sesame bundles at one time by 23 hrs /ha compared to 151 hrs /ha that of conventional. Sesame grader was appeared to have 72％ effects for sesame grain grading with 12 hrs /ha compared to that of conventional 54 hrs /ha. Grain yield of integrated mechanization culture system showed 6％ higher than that of coventional. Integrated mechanization culture system (sesame dibbling vinyl mulcher ＋ sesame binder ＋ sesame thresher ＋ sasame grader) showed 62％ of labour saving effects through whole steps of sesame culture by 472 hrs /ha compared to that of conventional 1, 230 hrs /ha.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.179-183
• /
• 2004

This study was conducted to investigate the effects of using barley seeder attached to rice harvest combine that could be used in rice harvesting and barley seeding simultaneously on the growth characteristics of barley and labor-saving efficiency. In developed seeding system, burley seeding was earlier about 5 days than in the conventional system, because of conducting rice Harvesting and barley seeding simultaneously. The germination of barley seed after seeding was protected from drought damage by the rice straw covering. Among the growth characteristics of barley using developed seeding system, the number of spikes per m$^2$ was lower than that of conventional system, but others showed longer culm length, hove kernel numbers per spike and heavier 1,000 kernel weight than those of conventional system. Developed seeding system resulted in about 57% labor-saving efficiency compared with conventional system. The cost of whole works from seeding to harvest of barley was saved about 8% compared with conventional system. A total of income increased about 16% than that of conventional system.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.78-79
• /
• 2013

소방보호복은 화재진압현장에서 소방관들을 화상 위험으로부터 보호하기 위해 가장 많이 착용하는 장비이다. 소방보호복의 열보호 특성을 정확히 파악하고 있어야 소방관들의 화재진압작업시 위험요소를 적절히 판단하여 화상 사고 등을 예방할 수 있다. 따라서 본 연구는 복사열 노출에 따른 소방보호복의 열보호 성능을 정확히 측정 및 분석하기 위해 실험 장비를 제작하고 실험을 수행하였다. 소방 보호복의 구성 재료 각각에 대해 복사열 노출을 시켜 시간에 따른 피복 전후면의 온도차와 통과 열유속을 측정하여 소방 보호복의 열보호 성능 특성을 살펴보았다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.187-192
• /
• 2003

우리나라의 밭작물 재배 시 잡초발생의 억제, 토양온도 및 수분 유지, 수량증수 등의 목적으로 약 274천㏊가 비닐피복재배를 하고 있으나, 한국자원재생공사에 의하면 2000년도 폐비닐 발생량중 약 48%만이 회수되고 있어 폐비닐에 의해 농토와 주변환경의 오염이 심각한 지경에 이르고 있다. 또한 폐비닐의 수거작업은 인력에 의존하고 있어 많은 노력이 들기 때문에 환경오염을 줄이고 수거노력 절감을 위해 기계화가 절실히 요구되고 있다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.32-35
• /
• 2005

밭고랑 옆의 해가림시설 지주목에 파이프라인을 설치하고 방제장치를 탑재한 주행장치가 자동으로 파이프를 추적하면서 농약을 살포 할 수 있는 방제기를 개발하여 인삼재배포장에서 성능시험을 실시하였다. 그 결과를 요약하면다음과 같다. 가. 인삼재배용 방제기의 주행장치는 동력원으로 축전지를 사용하는 DC모터에 의한 4륜 구동형으로 제작하였고, 방제장치는 수직 붐노즐 방식으로 쌍선형 노즐을 좌우에 3개씩 부착하고 살포각도를 조절할 수 있도록 제작하였으며, 인력으로 골간 이동시키는 방식이다 나. 성능시험결과 주행속도는 0.3m/s이고, 장애물이나 요철부의 통과 가능높이는 4cm였고, 작업성능은 38분/10a로 나타났다. 다. 방제성능은 피복면적비를 측정한 결과 인삼 잎 앞면은 100%, 뒷면은 40%이상으로 분무입자의 부착률이 양호한 것으로 나타났다.

• Journal of the Korean Society of Tobacco Science
• /
• v.15 no.1
• /
• pp.57-62
• /
• 1993

Ridger and vinyl mulcher for 8-10 PS power tiller which were distributed at the rate of one out of 2.3 farm households in Korea, was developed to ease the labor shortage of tobacco production. Devices wheel shaft extension by 30cm at both sides improved the stability of straight drive and enabled to save required labor hours by 50% for ridging at sloping field. Screw type blades were attached on center drive rotavator shaft, gear set was deviled to reverse the rotavator, and it was good at need to adjust the width and height for ridge. As the results, required labor hours for ridging and vinyl mulching could be saved by 90% as compared to conventional manual method after cattle plowing, and by 50% as compared to conventional power tiller method.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.516-521
• /
• 1997

국내개발 액체금속로 KALIMER 노심으로 설계한 전기출력 150 MWe (열출력 392 MWth)의 U-Zr이원합금핵연료 사용 소형노심에 대하여 열수력 특성을 분석하고, 그 결과를 전기출력 333 MWe (열출력 840 MWth)의 중형노심설계 특성과 비교ㆍ분석하였다. 분석에는 국내개발 액체금속로 KALIMER 노심설계기술 개발의 일환으로서 개발한 개념설계 초기 단계에서의 노심 열수력 특성 분석 방법을 사용하였다. 열수력 특성 분석은 먼저 각 집합체의 최고 선출력에 따라 유량그룹을 설정하고, 각 집합체의 최고온도 연료봉에 대하여 냉각재 온도, 피복관 중심온도, 핵연료 중심온도 등을 계산하는 방식으로 수행하였다. 특성분석 결과 두 노심 모두 노심내 출력분포를 더욱 평탄화 하고, 노심핵연료 영역에 대한 반경방향 블랑？ 영역의 출력비율을 높이는 작업이 필요하다.

• Journal of Welding and Joining
• /
• v.1 no.2
• /
• pp.1-6
• /
• 1983

용접중 발생되는 흄(Fume) 및 가스는 용접작업 환경을 오염시킬 뿐만 아니라 인체에 매우 유해하다. 용접 흄(Fume)은 금속 산화물로 구성된 아주 작은 입자이며 가스는 일반적으로 CO, CO$_{2}$, NO$_{x}$, SO$_{x}$, XF 등으로 구성되어 있다. 일반 피복 아아크 용접봉에서 발생되는 용접 흄은 인체에 매우 해로운 영향을 미친다. 즉 다량 흡입하게 되면 두통, 발열 등 급성 증상이 발생한다. 또한 소량을 장시간 흡입해도 진폐 등 만성증상을 일으킨다. 그러므로 현 국내 용접장에서는 흄에 의한 장해 방지를 위하여 충분한 환기시설과 완벽한 보호구 착용, 그리고, 용접 재료 자체의 흄 발생량을 감소시킨 저흄 용접봉(low fume type electrode)의 사용 방법 등이 검토 실시되고 있다. 본 보고서에서는 흄에 대한 올바른 인식을 꾀하는 한편, 용접자의 건강 보호를 목적으로 개발된 조선 및 철구조물의 주요 용접 재료인 철분 산화철계 저흄 용접봉에 관하여 소개하고자 한다.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.208-212
• /
• 2000

The effect of heat covering materials during cultivation of Shigyoku grape was examined on the effect of protection from freezing damage, labor reduction, and disease resistance during the wintering. This experimentwas accomplished using different combination of heat covering materials from the end of Nov as follows: straw and heat conservation cover B, kilding, color fabric A, and white needle punching fabric. Capacity of heat conservation was the least form white needle punching fabric, and the differences of other materials was slight. Early sprouting occurred by the treatment with heat conservation cover B, and the rate of sprouting was about 70.7% after 9 days of sprouting, showing 2.3-12.5% increase. Growth effect was not differ between heat conservation materials. Disease and insects occurred by the in dice 3.0-3.2 of crown gall from the heat conservation cover B treatment. Other damages were not observed or very little from other treatments. Demand of labor during steps of these treatments was more observed by 6% for kilding than heat conservation cover B, and those of color fabric A and white needle punching fabric were reduced by 6 and 15%, respectively.

• Journal of Internet Computing and Services
• /
• v.5 no.5
• /
• pp.1-15
• /
• 2004

In this paper, we explain the design and implementation of GWB(Gene WorkBench), which is a web-based, integrated system for efficiently managing and analyzing genomic sequences, Most existing software systems handling genomic sequences rarely provide both managing facilities and analyzing facilities. The analysis programs also tend to be unit programs that include just single or some part of the required functions. Moreover, these programs are widely distributed over Internet and require different execution environments. As lots of manual and conversion works are required for using these programs together, many life science researchers suffer great inconveniences. in order to overcome the problems of existing systems and provide a more convenient one for helping genomic researches in effective ways, this paper integrates both managing facilities and analyzing facilities into a single system called GWB. Most important issues regarding the design of GWB are how to integrate many different analysis programs into a single software system, and how to provide data or databases of different formats required to run these programs. In order to address these issues, GWB integrates different analysis programs byusing common input/output interfaces called wrappers, suggests a common format of genomic sequence data, organizes local databases consisting of a relational database and an indexed sequential file, and provides facilities for converting data among several well-known different formats and exporting local databases into XML files.