• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.627-633
• /
• 2003

The effects of alloying-element additions to Ag sheath on thermal conductivity and mechanical properties of Bi-2223 superconductor tapes have been evaluated. In order to evaluate the effects of sheath alloys and their configuration on the properties of tape, various combinations of Ag and Ag alloys were selected as the inner and outer sheath. Thermal conductivity of the tapes was evaluated by using thermal integral method at 10 ∼120 K. It was observed that the addition of Mg, Sb, and Au to Ag sheath significantly decreased the thermal conductivity at low temperature probably due to the alloying effect. Specifically, the thermal conductivity of AgMg, AgSb, and AgAu at 40 K were 411.4, 142.3, and 109.7 W/(m·K), respectly, which is about 2∼9 times lower than that of Ag (1004.6 W/(m·K)). In addition, the thermal conductivity of alloy-sheathed tape was significantly dependent on their thermal conductivities of constituent sheath materials. The mechanical properties of alloy-sheathed tapes were also evaluated. Yield strength and tensile strength were improved but workability decreased for alloy-sheathed tapes.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.754-760
• /
• 2006

Mercaptoundecanoic acid (MUA) has been used to enhance the dispersity of Au nanoparticles in organic solvent and the affinity between the Au nanoparticles surface and titanium dioxide shell in the synthesis of $Au/TiO_2$ core-shell composite nanoparticles. The dispersity of the MUA-coated Au nanoparticles in ethanol aqueous solution with different concentration of $H_2O$ was investigated by UV-Vis. absorption spectrum and the coating amount of MUA was varied from 0.02 mM to 1.0 mM. The MUA-coated Au nanoparticles were highly dispersed in pure $H_2O$ in the wide range of the coating amount of MUA. On the contrary, the MUAcoated Au nanoparticles showed an enhanced stability in the ethanol/$H_2O$=8/2 mixed solution only when the coating amount of MUA was 0.05 mM, and in the ethanol/$H_2O$=7/3 mixed solution when the coating amount of MUA was in the range from 0.02 mM to 0.17 mM. From this systematic study, it can be inferred that the stability and the dispersibility of Au nanoparticles in organic solvents are highly sensitive towards the amount of MUA coating.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.50-58
• /
• 1998

Water vapor transmission was tested in water bath controlled by $20^{\cire}C$, 90%RH for T800/AD6005 based composite motor case which made by filament winding method. We detected internal relative humidity of composite motor case by inserting the humidity detector through the head of motor case for the study of humidity transmission through the wall of composite motor case. We found out that this composite material appears the water vapor flux of 2.88${\times}$$10^{-9}$g/$\textrm{m}^2$sec and diffusivity of 7.98${\times}$$10^{-7}$$\textrm{mm}^2$/sec at $20^{\cire}C$, 90%RH water vapor condition.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.271-276
• /
• 2019

Oxide-dispersion-strengthened (ODS) alloy has been developed to increase the mechanical strength of metallic materials; such an improvement can be realized by distributing fine oxide particles within the material matrix. In this study, the ODS layer was formed in the surface region of Zr-based alloy tubes by laser beam treatment. Two kinds of Zr-based alloys with different alloying elements and microstructures were used: KNF-M (recrystallized) and HANA-6 (partial recrystallized). To form the ODS layer, $Y_2O_3$-coated tubes were scanned by a laser beam, which induced penetration of $Y_2O_3$ particles into the substrates. The thickness of the ODS layer varied from 20 to $55{\mu}m$ depending on the laser beam conditions. A heat affected zone developed below the ODS layer; its thickness was larger in the KNF-M alloy than in the HANA-6 alloy. The ring tensile strengths of the KNF-M and HANA-6 alloy samples increased more than two times and 20-50%, respectively. This procedure was effective to increase the strength while maintaining the ductility in the case of the HANA-6 alloy samples; however, an abrupt brittle facture was observed in the KNF-M alloy samples. It is considered that the initial microstructure of the materials affects the formation of ODS and the mechanical behavior.

• Korean Journal of Environment and Ecology
• /
• v.11 no.1
• /
• pp.37-45
• /
• 1997

The Nogodan area has maintained the subalpine meadows(m.s.l. 1,500m) in Chirisan National Park. A field experiment including fertilizing, introducing plants and mulching treatment was conducted for three years at artificially disturbed subalpine meadows in the Nogodan to find out effective revegetation measures. Factorial experiment(2*2*2) was applied to the subsoil sites with ten percent hillslope and the topsoil sites with forty percent hillslope. Regardless of site conditions, survival rates of plants were more effective in on-site conditions, showed significant increase in the number of individuals and crown coverage of vegetation, but mulching treatment did not show a significant effect.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.231-236
• /
• 1998

원자력 발전소의 핵연료 피복관 재료로 사용되고 있는 Zr합금의 부식특성에 미치는 Sn의 영향을 조사하기 위해 Sn 함량을 0.5, 0.8, 1.5, 2.0wt.%로 조절한 Zr-xSn 2원계 합금과 Zr-0.4Nb-xSn 3원계 합금을 제조하여 36$0^{\circ}C$ 물 분위기의 mini-autoclave에서 부식실험을 수행하였다. 2원계 합금에서 Sn이 0.5, 0.8, 1.5wt.% 첨가된 합금에서는 15일에서 속도천이가 발생한 후 급격한 부식 가속 현상이 나타났으나, 2.0wt.%가 첨가된 합금에서는 100일까지 부식 실험에서도 천이 현상을 보이지 않는 매우 높은 부식 저항성을 보였다. 그러나 3원계 합금에서는 2원계 합금과는 달리 40일 시험에서도 모든 합금들이 속도 천이 현상을 보이지 않고 천이전 영역에서의 부식 거동을 보이며, Sn 함량 변화에 따른 부식 속도의 차이를 감지할 수 없었다. 이러한 경향은 2원계 합금과 3원계 합금에서 Sn의 고용도 차, 미량 첨가된 Nb의 영향 및 석출물의 특성과 관련이 있는 것으로 사료된다. 또한 수소 흡수율면에서도 Sn 함량 변화에 따라 부식 거동과 비슷한 경향을 보이면서 2.0wt.%에서 가장 낮은 수소흡수율을 보였다 천이전 영역에서 산화막 구조 관찰 결과 천이전 영역의 모든 산화막에서 보호적 성질을 나타내는 tetragonal-ZrO$_2$가 관찰되었는데, tetragonal-ZrO$_2$의 분율은 Sn 함량에 따라 거의 같게 나타났다.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.129-136
• /
• 2011

In this paper, the shielding material for the product design of various electrical appliances is suggested by more environmentally materials like as the lacquer and the charcoal. The suggested shielding material has the shielding effectiveness of 97.2%, 98.7%, and 96.3% at 900 MHz, 1.8 GHz, and 2.45 GHz, respectively. In the microwave oven and the cell phone, the metal or metal-coated plastic are used for the shielding of strong electromagnetic wave. However, by using more environmentally materials like as the lacquer and the charcoal, the products can be manufactured more light weighting, more heat-resisting, more abrasion resisting, and more corrosion resisting. Also, the products design can be varied more mellow and more friendly.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.76-84
• /
• 2008

Researches on fire resistant performance of primary structural elements such as columns and beams located at above the ground have actively been doing than those located at the below the ground from many researchers. But the structural elements such as columns at underground is very important in aspects of not only structural performance but also fire environment. The columns at the basement carry all the structural loads from the above and that means very critical in fire circumstances than that located at above the grounds. To evaluate the fire resistance performance of primary structural elements located at below the ground we conducted several sorts of surveys that contained fire regulations from several countries and structural types, materials and status of passive fire protection methods.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.2
• /
• pp.1-6
• /
• 2011

This study aims at predicting structural behaviors of RC (Reinforced Concrete) beams retrofitted with hybrid FRPs (Fiber Reinforced Polymers). Toward this goal, structural analysis for the RC beams retrofitted with hybrid FRPs are performed and validated using existing experimental data. For the analysis, failure models due to debonding of FRPs and concrete separation are implemented within FE (Finite Element) model, based on Smith and Teng, model, and Teng and Yao model, respectively. Nonlinear material and geometrical effects are also included in the analysis. The suggested modeling approaches are able to predict structural behaviors of RC beams retrofitted with hybrid FRPs similar to the experimental data, however, a numerical model needs to be developed in order to predict failure strength of RC beams retrofitted with hybrid FRPs accurately.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.145-145
• /
• 2012

반도체 집적회로의 집적도가 증가함에 따라 RC delay가 증가하며, 금속 배선의 spiking, electromigration 등의 문제로 인해 기존의 알루미늄 금속을 대체하기 위하여 구리를 배선재료로 사용하게 되었다. 하지만 구리는 실리콘 및 산화물 내에서 매우 빠른 확산도를 가지고 있으므로, 구리의 확산을 막아 줄 확산방지막이 필요로 하다. 이러한 확산방지막의 증착은, 소자의 크기가 작아짐에 따라 via/contact과 같은 고단차 구조에도 적용이 가능하도록 기존의 sputtering 증착 방법에서 이를 개선한 collimated sputter, long-throw sputter, ion-metal plasma 등의 방법으로 물리적인 증착법이 지속되어 왔지만, 근본적인 증착방법을 바꾸지 않는 한 한계에 도달하게 될 것이다. 원자층 증착법(ALD)은 CVD 증착법의 하나로, 소스와 반응물질을 주입하는 시간을 분리함으로써 증착하고자 하는 표면에서의 반응을 유도하여 원자층 단위로 원하는 박막을 얻을 수 있는 증착방법이다. 이를 이용하여 물리적 증기 증착법(PVD)보다 우수한 단차피복성과 함께 정교하게 증착두께를 컨트롤을 할 수 있다. 본 연구에서는 이러한 원자층 증착법을 이용하여 구리 배선을 위한 확산방지막으로 텅스텐질화막을 형성하였다. 텅스텐 질화막을 형성하기 위하여 금속-유기물 전구체와 함께 할라이드 계열인 WF6를 텅스텐 소스로 이용하였으며, 이에 대한 원자층 증착방법으로 이루어진 박막의 물성을 비교 평가하여 분석하였다.