• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.585-590
• /
• 2001

Bulbs of Lilium Oriental hybrids cv. 'Casablanca' and 'Marco Polo' were grown in a plastic house in alpine area of Pyongchang Kangwondo. Saw-dust, black film, reflective film, transparent film, and white/black double film were used as mulching materials to ascertain the growth of foliage, the quality of flower, and the size of bulbs. Foliage weights of both lilies were higher when lilies were grown with mulching materials than control. There were no differences of bulb weight among the control and mulching treatments, except delayed bulb growth in black film and white/black double film. Mulching cultivation with saw-dust and reflective film stimulated foliage growth, root growth and bulb production, but black film delayed the growth and development. Transparent and white/black double films showed no effects on foliage growth and bulb development than the control. As mulching materials tended to delay lily growth, including foliage and bulb, an extension of growing term might be better to produce high quality lilies than common cultivation in alpine area.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.121-126
• /
• 1994

This experiment was carried out in the field to investigate the effects of sowing time, mulching materials and planting density on the growth and root yield of Peucedanum japonicum. The optfimum planting time for yield increase at Kyungbuk area whether the plant was grown under non-mulching or black P. E. mulching condition. Black polyethylene (P. E) film mulching was effective to promote emergence and growth, and dry root yield in the P. E. mulching was 10% higher than that in the non-mulching condition. The yield in the $20{\times}15cm$ planting density was 50% higher than that in the conventional $30{\times}20cm$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2004.04a
• /
• pp.38-39
• /
• 2004

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.76-80
• /
• 1997

'4 NiAl coating process was applied on 316 stainless steel to retard the corrosion of the wet- seal area of separator for the molten carbonate fuel cell. The Nit11 phasc on the stainless steel substrate could be formed by pre-coating with Ni, plated with A1 and ther, heat treated at $800^{\circ}C$ for 3 hr in $H_2/N_2$ gas atmosphere. The corrosion protection behavior of YiAl coating layer was stuilied under immersion condition in molten cxhonate salt($62^{m}/_{o}Li_2CO_3-38^{m}/_{o}/K_{2}CO_{3}$) at $650^{\circ}C$. The NiAl coating layer ticposited on the AiSi 316 stainless steel had high corrosion resistance in molten carbor. dte salt. The corrosion resistance of XiAl (~~jpoared to be associated with the .A1 oxide formed on the surface of coating layer.

• Korean Journal of Metals and Materials
• /
• v.48 no.8
• /
• pp.691-698
• /
• 2010

A study has been carried out to evaluate the interaction behavior between a lanthanide element and clad material in order to analyze the effect of the lanthanide element on the fuel cladding chemical interaction (FCCI). A diffusion couple test between Misch metal (70Ce-30La) and ferritic-martensitic steel (Gr.92) was performed at $660^{\circ}C$, followed by a microstructural analysis of the coupled sample. The results showed that Ce in the Misch metal, rather than La, reacted with the ferritic-martensitic steel (FMS) to form an interaction layer that penetrated the clad thickness. Fe diffused outside the clad interface to form an $Fe_2Ce$ compound, leaving a depletion of Fe caused by excess diffusion as well as by the formation of Cr-rich precipitation inside the interaction layer. The rate of growth followed the cubic rate law, which indicated that Fe depletion was caused by the diffusion of Fe and that the associated Cr-rich phase formation controlled the whole diffusion process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.435-442
• /
• 2021

This study was conducted to determine an appropriate coating method for mechanized sowing of small and light Italian ryegrass seeds. In the case of manufacturing coated seeds, 2% PVA was superior as an adhesive compared to PVP and Tween80. Calcium carbonate + talc adhered to the seeds smoothly and well and the seed weight was higher than that of the other coating materials. The germination percentage of seeds coated with calcium carbonate + talc was 95.8%, which was not significantly different from 96.5% of the control group, but the mean daily germination was the highest. As the coverage ratio of calcium carbonate + talc increased, the strength tended to increase when coated at 1.5 times the seed weight. There was no difference in the germination rate and plant height compared to the control group according to the coverage ratio.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.209-212
• /
• 2002

유화중합을 이용한 복합입자는 입자의 내외부 모두가 2종류 이상의 고분자물질로 조성된 유기-유기형과, 무기질 입자를 고분자물질로 피복한 무기-유기형 복합입자로 대별된다. 무기질의 분체와 유기질 고분자로 이루어지는 분산계 복합재료도 현재 실용화 되고 있는 복합재료중의 하나이지만 무기질 분체는 유기고분자와 그 성질이 현저히 다르기 때문에 소재간의 친화성, 복합체에서 무기분체의 분산상태 등이 복합재료의 물성 결정에 중요한 요인이 된다.(중략)

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

Microstructural and mechanical property were evaluated at the medium-sized HT9 (12Cr-1MoWV) forged steel which was considered as primary candidate for the fuel cladding in sodium-cooled fast reactor (SFR). Material was forged at $1170^{\circ}C$ after the induction melting to make round bar as 160mm diameter, 7000mm length then the radial distribution of microstructure as well as microhardness was evaluated. The results showed that overall microstructure exhibited as ferrite-martensite structure, where small amount (2~3%) of delta ferrite was formed throughout the specimen and maximum 15% of transformed ferrite was formed at the center, where it gradually decreased toward the radial direction. Sensitivity analysis of the cooling curve and Time-Temperature-Transformation (TTT) diagram revealed that formation of transformed ferrite could be avoided when the diameter was decreased down to 120mm.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.32-40
• /
• 2002

This study was carried out to investigate the effects of rootball media and covering materials for air-layering on the rooting and growth responses of miniature tree material. The experiment was performed with Carpinus coreana Nakai in the vinyl-house condition. The covering material, jute tape increased the diameter growth at 1cm above the girdling part of the tree material. The combined use of the soil mixture of peatmoss and perlite(2:1, by volume) as rootball medium and jute tape increased the dry weight of current year leaves and shoots. The number of shoot shorter than 10cm and that of leaves from the shoot were produced more by using a sphagnum moss for rootball medium than the soil mixture. The use of jute tape shortened the period required for rooting and increased the number of fine roots and the total root dry weight at girdling part of the tree material. On the other hand, the number of long roots was produced more by using the sphagnum moss than the soil mixture.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.177-181
• /
• 1996

This study was carried out to obtain basic data for technical inprovement about cultivation according to micrometerological changes under various mulching materials in Dendropanox morbifera LEV. The results are summarized as follows. Transparent polyethylene film and black polyethylene film mulching materials increased the soil porosity and reduced change of the soil moisture content. The rate of missing plant during overwinter increased in the control plot. Growth of Dendropanox morbifera LEV, was accelerated by transparent polyethylene film and black polyethylene film mulched.