• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.223-223
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.19-19
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.199-199
• /
• 2005

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.445-452
• /
• 1994

Three-axial deformation behavior of the Zircaloy cladding tube under the irradiation condition of the fuel in pressurized water reactor can be analyzed by the anisotropy in the creep and the irra- diation growth, which depends on the texture parameter. A methodology to evaluate the impact of the anisotropic creep and irradiation growth on the strain in each axial direction of the cladding tube has been proposed. Based on the measured strains after irradiation and predicted ones with the help of a fuel performance analysis code, it is found that a tangential strain of the cladding tube is caused mainly by the creep, whereas a axial strain of the cladding is caused mainly by the irradiation growth but with a considerable contribution of the creep at low irradiation.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.85-94
• /
• 1992

The size, morphology and distribution of pores which affect on the physical properties of thermal barrier coatings were investigated to find the relationship with spraying parameters. The plasma-sprayed zirconia coatings contained numerous micropores as well as macropores which were appeared as spherical and irregular pores, and cracks. The pore formation process and its characteristics were varied with spraying distance. Porosity itself was varied with spraying parameters such as spray gun current, gas flow rate and the gas used(Ar or $N_2). The Porosity of coatings was ranged from 10 to 18% with the variation of spraying conditions. The relative hardness measured by the scratch test, showed strong dependence on the porosity of coatings rather than spraying parameters.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.15-21
• /
• 2011

This study investigated the effect of soil mulching materials and methods on weed occurring for the growth and flowering characteristics in Gypsophila plants cultivation. For mulching materials were used black polyethylene (PE) film, black polypropylene (PP), and green polypropylene, and these were mulched in both ridge and furrow (BRF) or only furrow, respectively. The weed was occurred total $146.2g/m^2/yr$ as dry weight in non-mulching, but $4.1{\sim}4.2g/m^2/yr$ in BRF mulching by black or green PP. Also weed control were yearly required 27.9 persons/10a in non-mulching, whereas 2.4 persons/10a in BRF mulching by black or green PP. Flower budding and blooming were roughly delayed in non-mulching and furrow mulching. Flowering characteristics such as flower stalk length, primary branches number, and stem firmness were remarkably improved in BRF mulching of black or green PP. Cut flower yield was increased on black BRF mulching or green PP in summer cultivation, while green PP BRF mulching showed better yield in in autumn cultivation. Mortality rate of Gypsophila plants after summer season was lowest as 12.4% in furrow mulching with black PP, followed by about 19.0% in green PP mulching, but highest as 39.0% in BRF mulching with black PE film. Rosette formation rate was lower in furrow than BRF mulching, and was lowest as 13.1% in BRF mulching with green PP, followed by 15.2~15.8% in BRF mulching with black PE film or black PP. So it was thought that BRF mulching with green PP was highly effective in weed control and improvement of yield and cut flower quality in Gypsophila plants cultivation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1036-1040
• /
• 2008

수질 개선을 위한 많은 노력과 투자를 하고 있다. 하지만 농경지의 부적절한 관리로 인한 토양유실로 발생하는 오염은 여전히 큰 비중을 차지하고 있다. 특히 강원도는 산이 많아 농경지의 대부분이 경사지에 위치하고 있다. 경사진 농경지는 그 특성상 토양유실이 일어나기 쉬운 조건에 있다. 경사지의 토양 유실은 지력을 저하시킨다. 또한 토양과 함께 유실되는 유기물 및 양분은 농경지의 손실이며 주변 수역으로 유입되어 수질 오염의 원인이 된다. 이런 토양 유실은 직접유출량과 큰 연관이 있다. 본 연구에서는 강우강도, 경사도, 피복도를 동일하게 조정할 수 있는 실내 인공강우 시험기를 사용하여 직접유출율을 산출하였다. 피복재료는 볏짚거적을 사용하였다. 강우강도는 30 mm/h와 60 mm/h 그리고 경사도는 10 %와 20 %를 사용하였다. 볏짚거적 피복처리는 0 kg/ha (나지), 3,000 kg/ha (볏짚 1겹), 6,000 kg/ha (볏짚 2겹), 10,000 kg/ha (볏짚 3겹) 이었다. 강우강도 30 mm/h, 경사도 10 % 인 시험포는 볏짚 1겹으로만 피복하여도 직접유출율이 0.77 %로 유출이 거의 발생하지 않았다. 강우강도 30 mm/h, 경사도 20 % 인 시험포의 직접유출율은 피복이 볏짚 1겹인 경우 16.9 %, 볏짚 2겹인 경우는 0 %로 매우 낮았다. 강우강도 60 mm/h, 경사도 10 % 인 시험포는 피복이 볏짚 2겹인 경우 3.4 % 로 매우 낮았다. 강우강도 60 mm/h, 경사도 20 % 인 시험포는 피복이 볏짚3겹인 경우 16.58 % 로 나타났으며, 볏짚 피복을 4겹 이상으로 할 경우 더 큰 저감 효과를 가져 올 수 있을 것으로 판단된다. 따라서 본 연구의 결과로 경사진 농경지의 직접유출량을 저감시켜 토양유실과 탁수를 줄이기 위한 방법으로 볏짚 피복을 선택하면 효과적인 것으로 사료된다.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.16-20
• /
• 1995

This study was carried out to know the effects of $N,\:P_2O_5,\:K_2O$ application and mulching materials on the yield and quality of Peusedanum japonicum. And conducted from 1990 to 1992 in the south region. The emergency rate by mulching materials was 80% on non-mulching, 74% on black P.E mulching, but 49% on the transparent P.E mulching. The yield of dried root on the transparent P.E mulching was increased 7% compared to non-mulching. The decreasing rate of yield was increased with the sequence of $N>P_2O_5>K_2O_5$. The significant negative correlation was obtained between the content of ash and nitrogen application, and the significant positive correation between the content of ash and potassium application. The contents of ash, acid insolubleash, and $C_2H_5\:OH$ OH extract were not affected by the treat-ment of mulching materials. When Peusedanum japonicum was cultivated in the south region for one year, optimum application of fertilizers was $N-P_2O_5-K_2O_5=21-13-10kg/10a.$

• Korean Journal of Organic Agriculture
• /
• v.25 no.1
• /
• pp.187-201
• /
• 2017

This study was conducted to elucidate the effect of mulching materials on growth characteristics, saponin contents and antioxidant activity of Platycodin grandiflorum Ridix roots for organic farming. Plastic film, sawdust and rice bran were treated by mulching with several different methods after transplanting P. grandiflorum Radix. In root length, when plastic film plot, sawdust plot and rice bran plot were treated, root length was recorded the highest scores (24.0~27.5 cm) in plastic film plot and sawdust plot. Root width was recorded the highest score (30.0 mm) in plastic film plot. Also, the number of fine-roots was the highest in plastic film plot (36.0). Fresh weight, which affects directly yield, was the highest in plastic film plot (130 g/plant). The contents of platycodin D3 and deapioplatycodin D were shown to 111.2 and 48.1 mg/100 g, the highest values were observed in sawdust plot. The total polyphenol and flavonoid contents were recorded the highest scores (11.0 and 8.6 mg/g, respectively) in plastic film plot. In this study we confirmed that there were differences among mulching materials in growth characteristics, saponin contents and antioxident activity of P. grandiflorum roots.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.237-243
• /
• 2001

The experiment was conducted to investigate the effect of different mulching materials on the growth and quality of oriental melon in protected cultivation. Soil temperature, plant growth and fruit quality were affected by different mulching materials, clear polyethylene (P.E.) film (control), clear inset between black P.E. film, green P.E. film. and recycled ethylene vinyl acetate (E.V.A.) film. The highest night soil temperature was at 20 cm depth under green P.E. film, but was at 5 cm depth under other materials. Difference of soil temperature as affected by mulching materials decreased with increasing soil depth. Plant height, number of nodes, leaf area index (LAI), crop growth rate (CGR), and relative growth rate (RGR) at 30 days after transplanting were significantly greater in the recycled E.V.A. film treatment than in the other treatments. Fresh weight of weeds growth under the mulching materials was not affected by mulching material at 30 days after transplanting. However, it was the greatest under clear P.E. film mulching at 90 days after transplanting. Harvesting time of recycled E.V.A. film was 2 days earlier than that of clear P.E. film. Difference in fruit weight and length, and soluble solid content were not affected by the mulching materials. Marketable yield was 2,426 kg.10a$^{-1}$ in recycled E.V.A. film treatment, which was 6% greater than in clear P.E. film treatment.