• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.122-122
• /
• 2017

인산-망간 화성피막의 경우 양질의 피막층을 형성하기 위하여 표면조정제를 사용하고 있으며, 화성피막 직전에 표면 조정제 처리를 하여 피막 결정의 미세, 치밀, 균일하게 하는 동시에 피막의 화성시간을 단축하고 있다. 본 연구는 표면조정제의 입자 사이즈에 따른 화성피막 입자 사이즈 변화 및 물리적인 특성 향상을 확인하였다. 하지금속 소재로는 기계구조용 탄소강재(SM45C)을 $50{\times}50{\times}3mm$로 제작하였고, 전처리 공정으로는 탈지 ${\rightarrow}$ 에칭 ${\rightarrow}$ 디스머트 후 표면조정제 입자 사이즈별로 표면조정 후, 화성피막 처리를 하였으며 각 조건에 따른 피막 층의 미세조직은 SEM을 사용하여 관찰하였고, 윤활성은 내마모시험기(Ball on disc)를 사용하여 마찰계수 측정을 통해 확인하였으며, 내식성은 5% NaCl 염수분무를 실시하여 적청 발생 면적으로 측정하였다. 표면조정제의 입자 사이즈는 4종류로 세분화하여 표면조정 후 화성피막 처리하였으며, 표면조정제의 입자 사이즈를 미세화함에 따라 화성피막의 입자 사이즈가 미세, 균일해지고 피막의 치밀도가 향상됨을 확인할 수 있었다. 표면조정제의 미분화는 소재 표면에 작고 치밀한 결정(활성점)을 만들며, 표면조정제의 입자 사이즈가 작아질수록 이러한 활성점의 크기가 미세해지고 화성피막의 입자 사이즈 또한 미세화 시키는 역할을 하는 것을 확인 할 수 있었다. 이처럼 표면 조정제의 입자 사이즈에 따른 화성피막 입자 사이즈 및 물성변화는 SEM, 내마모시험 및 내식성 시험을 통하여 확인할 수 있었다. 즉, 표면조정제의 입자 사이즈가 미세해질수록, 화성피막의 입자사이즈가 미세화되었고, 윤활성 및 내식성이 향상되는 것을 확인 할 수 있었다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.93-98
• /
• 1983

Apple sugaring and apple nectar gel were treated with coating agent, and then the rate of weight loss, browning reaction and fungi growth on the storage conditions of those were investigated. The results obtained were summarized as follows; The composition of sucrose, D-sorbitol, corn syrup, gelatin, arabia gum, citric acid, sodium citrate and sodium ascorbate as a nontoxic coating agent was desirable to repress weight loss browning reaction and fungi growth of apple sugaring and apple nectar gel. It was the most effective method that apple sugaring was treated with the coating agent and refrigerated with double packaging. The contraction by weight loss, browning reaction and fungi growth of apple nectar gel treated with the coating agent and freezed with double packaging were repressed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.150.1-150.1
• /
• 2013

가속기 건설과 운영 기반기술을 접목시켜 일반적인 진공 소재로 많이 사용되는 스테인리스강에 두꺼운 크롬산 피막을 형성하여 극 고진공용 우주환경 모사용으로 적용 가능한 표면처리에 대해서 알아보았다. 산 처리제를 사용한 부동태피막 형성 방법, 전해연마에 의한 방법, 전해연마 부동태 피막형성 후 다시 산 처리제에 침전하는 방법을 비교하였다. 본 발표에서는 인위적으로 강하고 두꺼운 크롬산 피막을 형성하는 방법을 제시하고 그 방법에 따른 크롬 산화층 두께 변화를 관찰하였다.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.136-144
• /
• 1992

This study was aimed to extend the marketing period through the postharvest application of fruit coating materials in early cultivar 'Tsugaru' apples. Postharvest application of fruit coating materials were effective on remaining freshness during storage and marketing. Prestorage waxing showed higher flesh firmness and weight loss was greatly reduced after storage. This tendency was continued even after marketing period. While no clear effect of prestorage Prolong application on keeping freshness was found, poststorage application of Prolong appeared to be most effective on the prevention of weight loss and keeping firmness during marketing. Parts of fruit developed $CO_2$ injury - like disorder regardless posthavest treatments but no trial was conducted to examine this disorder in this study. Further study should include to determine the cause of this disorder.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06b
• /
• pp.38-46
• /
• 1995

Bonded film을 형성시키기 위한 대표적인 고체윤활제들로는 이황화-몰리브데늄, 이황화-텅스텐(WS$_{2}$), 보론-나이트라이드(BN), 흑연(Graphite) 등을 들 수 있으며, 이들 고체윤활제를 표면에 효과적으로 부착시키기 위하여 사용되는 수지류는 페놀 및 에폭시계수지 등이 사용되고 있아. Bonded film의 마찰마모특성은 이와 간이 피막 내에 첨가된 고체윤활제 및 수지의 종류, 고체윤활 입자들의 크기 및 순도,그리고 이들 상호간의 배합비율 등에 의하여 크게 좌우되며, 아울러 피막 내에 소량으로 첨가될 수 있는 여러 가지 보조첨가제들에 의해서도 크게 영향을 받는 것으로 알려져 있다. 고체윤활제 성분들의 조성과 더불어, 재료표면의 물리화학적인 전처리 조건도 매우 중요한 요인이 될 수 있다. 따라서 본 논문에서는 이와 같은 윤활피막내 고체윤활제들의 배합, 고체윤활피막의 표면전처리 방법들을 변화하고 이들에 따른 상기 고체윤활피막들의 마찰 및 마모 특성에 관하여 시험을 행하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.105-106
• /
• 2009

AZ31 (3% Al, 1% Zn) Mg 판재의 내식성 향상을 위해 Ti/Zr/Polymer 복합계의 Cr-free 화성처리 방법을 이용하였다. 염수분무시험을 통해 최고 72시간 ($5{\sim}10%$ 발청) 내식성이 나타남을 확인하였다. 화성피막의 내식성은 그 피막이 가진 성분, 균일도, 치밀도, 형상 및 두께에 의해 좌우되는 만큼 TEM, SEM을 통해 화성피막 구조가 내식성과 어떠한 관련이 있는지 조사하였다. 또한, 화성처리 전 단계 공정인 탈지와 산세 및 중화 공정의 변수 조절을 통해 전처리 공정이 최종 화성피막의 물성에 어떠한 영향을 미치는지 조사하였다. 탈지조건을 $35{\sim}40^{\circ}C$, 5분에서 $50{\sim}80^{\circ}C$, $10{\sim}20$분으로 변경 시 좀 더 균일한 외관을 얻을 수 있었고, 적절한 중화제 선택을 통해 화성피막을 균일하게 형성시킬 수 있었다. 투과전자현미경 결과로 미루어 화성피막의 두께보다 균일도와 치밀도가 내식성에 결정적인 영향을 미치는 것을 확인할 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.92-97
• /
• 2019

A study was conducted to improve the adhesion of propellant, liner,and insulation. Insulation was shown to be more advantageous in improving the adhesion when a barrier coat was applied compared to a bare insulation layer. It was confirmed that the adhesion strength between the insulation and the propellant improves as the thickness of the liner coating increases. The liner was cured for 24 h. If the liner is cured for a long time, it will adversely affect adhesion. Adhesion is also improved when a bonding agent is applied. As the bonding agent content increases, the adhesion improves. There is a change in the adhesive strength depending on the type of bonding agent used. HX-868 shows slightly more improved adhesion than HX-752.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.648-652
• /
• 2002

Removing shup from oyster by aeration method and coating with edible coating materials were investigated to improve oyster quality for the retort processing. Aeration rate and pore size of nozzle were critical factors to remove shup by aeration method. Optimum aeration rate and nozzle size were 45 L/min and 0.4 mm, respectively, when aeration was peformed two times and each operation maintained for 1 minute. Sodium alginate (SA) was used for oyster as the basal coating material. However, SA affected mouth-feel when it was applied at high concentrations. Sub-coating materials including skim milk, waxy corn starch, Purity CSC, white corn starch and carboxymethylcellulose (CMC) in decreasing order showed a positive effect on improving coatability and mouth-feel. Therefore, it is suggested that 1.5% SA and 0.9% skim milk should be the optimum composition of coating materials for oyster. Browning and syneresis of the porridge containing the coated oyster were considerably inhibited as compared with the sample without the coated oyster.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.43-54
• /
• 1995

This study was conducted to examine the metal release of TiN-plated stainless steel orthodontic appliances by constructing the simulated orthodontic appliances equivalent to maxillary half arch, by dividing into TiN-plated and TiN-nonplated Bloops and by dividing again these groups into welded and nonwelded groups. And then, the total quantity of metal release was obtained by measuring the amounts of both soluble and precipitated nickel and chromium after immersing in artificial saliva for 15 days. And then, the corrosion appearance of surface structure was observed by using SEM. The results of this study were summarized as follows. 1. The total amounts of released nickel and chromium showed that the TiN-plated group after welding(Group 1) was 25.46 ${\mu}g$, respectively, and 17.4 ${\mu}g$, while the TiN-nonplated group after welding(Group III) was 54.69 ${\mu}g$, respectively, and 85.27 ${\mu}g$. Then, the TiN-Plated group indicated less amounts of metal release(p<0.05). 2. The total amounts of the TiN-plated group without welding(Group II) was 0.05${\mu}g$ and 0.34${\mu}g$, respectively. Then, it was shown that the TiN-plated group without welding(Group II) indicated less metal release than that of the TiN-Plated group after welding(Group I)(p<0.01, p<0.05). 3. When observing their surface structure, there were a lot of precipitate and pitting corrosion in the groups with welding(Group I & III), when the TiN-plated group(Group I) showed lower level than the TiN-nonplated group(Group IIII). On the other hand, the groups without welding(Group II & IV) indicated a little of pitting corrosion. 4. In case of observation with the naked eyes, it was shown that there were significant disco1oration and corrosion in the groups with welding(Group I & III), while there was no any remarkable change in the groups without welding(Group II & IV).

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.381-390
• /
• 2017

Desalination is the main focus of the stabilization of iron artifacts. However, drawbacks such as re-corrosion are noted due to the uncertainty in the elimination of the corrosive factors and artifacts. Several studies have been carried out on the effects of corrosion inhibitors to overcome these shortcomings. In this study, the effects of type 3 water treatment on corrosion inhibitors were investigated. Surfaces of samples that contained film corrosion inhibitors on their surfaces were analyzed. The results revealed that the surface rust was removed from the sample of type 1 No. 2 that was mainly composed of phosphate. The average weight reduction rates of re-corrosion samples were 0.58, 0.03, and 0.07% for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The changes in the $Cl^-$ ion, a corrosive agent were found to be 28.60, -4.08, and -1.94 ppm for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The water-treated films were analyzed by X-ray photoelectron spectroscopy (XPS). It was found that type 2 No. 2 had less Fe the basis metal, than that in type 3 No. 2 indicating much better film. Moreover, Si content was higher in type 2 No. 2, based on the silicate content, than in type 3 No. 2. They are speculated to be the reason or the formation of a better film. Type 1 No. 2, which is mainly composed of phosphate, would be inappropriate as a metal artifact conservation treatment. It was determined that type 2 No. 2 and type 3 No. 2 water treatments, which are mainly composed of silicate, provided excellent corrosion inhibiting effects. Corrosion inhibitors could be used as emergency treatment agents during the excavation of iron artifacts.