• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.3
• /
• pp.75-86
• /
• 1986

The welded joint of the rail of railroad had shown the complicated behaviour of fatigue crack growth due to the effect of low toughness, residual stress, welding stress and strain etc. resulting from welding. Also, the welding connection has been necessary as making longer the rail, thus fatique fracture has often occurred at welded joints. From above, in this paper, faigue test was done at base metal, gas pressure and thermit welded joints to give the basic data to construct S-N diagrams. From this, it was known that the base metal was better than welded joint and gas pressure better than thermit welded joints in the resistance against the behaviour of fatigue crack growth. And it was also found that it is very dangerous to control fracture only by the method of material mechanics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.1
• /
• pp.46-51
• /
• 2007

In this study, test results for fatigue crack propagation of Al-2024-T3511 are presented considering corrosion effects, and fatigue lifes are compared for the cases of corrosion and non-corrosion. Higher corrosion environments show lower fatigue life and faster crack growth. To predict the corrosion fatigue life, a corrosion factor concept is newly introduced and applied in Paris' law. The predicted results show good agreement with experimental data and this corrosion fatigue model can be successfully used for the prediction of fatigue life of aluminum structure with corrosion effects.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.856-860
• /
• 2002

The main objective of this study is to consider the effect of fatigue crack behavior on the variable depth of micro hole defects in SM20C at the symmetric position. The fatigue crack propagation test is performed by rotary bending fatigue test machine. The relationship between crack length(2a), cycles(N) and crack growth rate(da/dN) are investigated in this study. The result from the rotary bending fatigue test under the applied stress at 250MPa turned out that the fatigue life illustrated almost constant when the depth of symmetric micro hole deflects is both part A and B at the hope depth(h) = 0.5mm.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.23-27
• /
• 1993

현재까지 SFCP 해석법은 기초단계에 있으며, 아직도 정립된 방법이 없는 것이 사실이다. 따라서, 이 분야에는 많은 개선을 필요로 하고 있다. 이와 같은 개선은 이론적인 연구뿐만이 아니라, 실험적인 연구가 바탕이 되어야 라며, 동시에SFCP에 영향을 주는 초기균열의 변동성, 하중의 변동성 등을 정확한 모델링 방법에 대한 연구가 병행되어야 한다. 그리고 더 나아가서 실제 구 조물에서 피로파괴에 영향을 주는 중요한 요소인 잔류응력, 부식 등의 고려하는 방법에 관한 연구가 수행 되어져야 할 것이다. 또한, 지금까지의 연구가 주로 구조부재에 하나의 균열이 존 재한다는 가정을 내포하고 있는데, 실구조물에 적용하기 위해서는 여러개의 균열이 동시에 존 재하는 경우에 대한 연구와 균열이 성장하면서 합체(coalescence)하는 경우에 대한 연구도 수행 되어야 한다. 이와 같은 연구가 꾸준히 진행되어 소기의 성과를 거둠으로써, 구조물의 피로파괴 확률을 정확하게 추정할 수 있을 것이며, 이에 따라 합리적인 설계가 가능해질 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.221-221
• /
• 1999

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.275-284
• /
• 1991

Fatigure crack growth from surface defects is one of the most important subjects for the evaluation and the assurance of safety in pressure vessels, piping systems, ship hulls and other various structures. This paper attempts to analysis some practical or general problems such as the estimation of crack growth life to penetrate the plate thickness, based on fatigure crack growth from a single surface flaw and the interaction of multiple flaws. An experiment on the coalescence of multiple undercuts was carried out under cyclic tension condition as a attempt to the analysis of multiple crack problems. It is noted that the fracture strength is characterized by the analogy to that in a single crack growth.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1583-1591
• /
• 1990

Life prediction and residual life prediction of structures of machines are one of the most strongly world wide needed problems as requirement in the stage of slowly developing economy which comes after rapidly and highly developing stage. For the purpose of statistical life prediction, fatigue test was conducted under the 4 stress levels, and for each stress level, about 20 specimens are used. The statistical properties of crack growth parameter m and C in the fatigue crack growth law of da/dN=C(.DELTA.K)sup m/, and the relationship between m and C, and the statistical distribution pattern of fatigue crack growth rate can be obtained by experimental results.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.356-361
• /
• 2008

In characteristics of fatigue crack propagation, it is important that fatigue life is affected by crack closure phenomenon in thin sheet Al alloy. The purpose of this paper is to analyze the characteristics of fatigue crack propagation in constant loading condition for sheet Al 2024-T3 alloy of two sort of thickness and identify the difference of fatigue life in thin sheet specimen comparing experimental results of thin sheet specimen and relatively thick sheet specimen under same fatigue loading condition. In applying fatigue related material constants from fatigue crack propagation analysis, we attempt to operate the fatigue life estimating process of thin sheet specimen by modified Paris‘ law considering crack closure phenomenon and analyze the experimental and prediction results of fatigue life in thin sheet Al alloy.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.75-86
• /
• 1996

A fatigue life prediction program for multiple planar surface cracks in finite plates and T-fillet joints, based on linear elastic fracture mechanics was developed. This prediction technique include the crack coalescence, mutual interation and the stress intensity concentration effect in welded joints. Total of 44 cases were compared with lida's and Vosikovsky's experimental results and it was found that the present method was a reasonable tool for the predictioin of fatigue life.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.199-203
• /
• 2004

Feasibility of 3Y-TZP for dental implant abutment was evaluated under the Hertzian cyclic fatigue by examining the extent of the indentation damage and strength degradation. Fatigue test was conducted at contact loads of 500 to 3000 N and up to $10^6$ cycles in exact in vitro environments. At 500 N, no strength degradation and crack generation was observed up to $5\times10^5$ contact cycles. As load rose, the dramatic reduction in strength was observed when the damage transition from ring to radial crack occurred. The. extent of strength degradation was more pronounced in vitro environment probably due to chemical corrosion of artificial saliva through cracks introduced during large numbers of contacts.