• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.517-518
• /
• 2015

In this research, the application of GPS and Gyro sensor based FlyingDisc with the value of 3D position and circulation sensors was proposed for school physical education. 3D Unity for 3 dimensional expression of sensors was applied for the 3D position and circulation direction from the FlyingDisc.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.628-631
• /
• 2016

본 연구에서는 플라잉디스크의 윗면 곡률과 끝단두께에 따른 공력특성의 변화 및 유동 흐름을 EDISON_CFD를 통해 해석하고자 한다. 플라잉디스크는 받음각이 증가할수록 윗면 표면에서는 박리 거품이 발생하게 되고 아랫면에서 윗면으로 올라 갈려는 유동의 흐름이 발생하게 되어 뒷전과 후류에서 거대한 박리 거품이 발생하게 되어 공력특성 및 유동흐름에 큰 변화를 주게 된다. 총 5가지의 형상에 대해서 받음각을 $0^{\circ}{\sim}25^{\circ}$까지 마하수 0.0588, 해석모델은 KFLOW에서 k-w SST를 레이놀즈수 $3.78{\times}10^5$을 조건으로 각 형상의 공력특성과 유동의 흐름의 비교를 분석하였다. 그 결과 윗면의 곡률이 증가 할수록 앞전박리가 활발해지고, 끝단두께가 두꺼워 질수록 뒷전박리가 활발해진다. 이로 인해 곡률은 완만할수록 두께는 얇을수록 양력계수와 실속각을 증가 시킬 수 있다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.566-570
• /
• 2016

본 연구에서는 플라잉 디스크를 이용하여 Pitching 운동 조건에서의 공력특성을 해석하였다. 본 해석에서 사용한 플라잉 디스크 모델은 프리원 151_140이며, 해석자로는 KFLOW_EDISON_2D_3DOF를 사용하였다. Pitching 운동이 있는 경우 받음각의 변화에 따른 공력특성을 비교 분석하였다. 기준 받음각의 변화에 따라 형상 아랫면과 뒷전 부근에 실속 와류가 다른 형태로 생겨 플라잉 디스크의 공력 특성에 영향을 준다는 것을 확인하였다. 또한, 기준 받음각이 증가 할수록 강한 실속 와류가 발생함을 알 수 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.991-1000
• /
• 2019

The flying-disc game has started since 1940. It has been spreading rapidly in Korea since 2007, mainly in elementary schools. Additionally, as sports science has been developed, research on flying discs has been continued to build a monitoring system for technological improvement and efficiency. In this paper, we acquire information on the user's flying-disc using 9-axis motion sensor and GPS. Then we propose a method for wireless transmission using Bluetooth 5.0. Specifically, the HW platform was designed and implemented not only to monitor a real-time data but also to compare and analyze rotational speed, flight trajectory, and a count of disc rotation through post-processing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.385-392
• /
• 2018

This paper suggests a new method to estimate the roll and pitch damping moment coefficients of a flying disc through sensor data from the onboard IMU module. This method can be easily performed than wind tunnel or computational fluid dynamics methods because it estimates aerodynamic coefficients simply after accumulating the inertial data through several repeated flight experiments. Estimated coefficients are applied to a simulator which is based on the flight dynamics of a flying disc. Finally, the predicted flight trajectory is compared with the true position provided by GPS, which demonstrated the validity of the proposed estimation method.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.4-8
• /
• 2016

본 연구에서는 플라잉 디스크를 이용하여 회전 운동의 유무에 따른 공력특성의 변화를 비교 분석하였다. 회전 운동이 발생하면 표면에 비대칭적으로 압력이 분포하기 때문에 롤링 모멘트가 발생하고 마그너스 효과로 측력이 발생하고 피칭모멘트, 회전감쇠모멘트가 발생하고 롤 안정성이 증가한다.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.555-563
• /
• 2019

This study was to provide quantitative basic data on the forehand and backhand throw movements of flying disks. For this purpose, the kinematic variables were calculated using the three-dimensional motion analysis system. A comprehensive analysis of the study variables showed that it is important to throw flying disks accurately as well as far away, so in P2 and P3 it is necessary to control forward movement and concentrate on the rotation of the joints. In addition, rotational force transfer from pelvis to body is considered important for efficient rotational movement. The forehand was found to mainly utilize the movement of the upper extremity joint to perform throwing motion, while the backhand throw was found to be relatively utilized for the rotation of the torso and pelvis. Based on the quantitative data of this study, we hope that it can be used as a basic material for on-site training of Flying Discs.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.58-62
• /
• 2016

본 연구에서는 지면효과의 영향을 비행체의 형상에 따라 비교하기 위해 에어포일, 플랩을 장착한 에어포일 그리고 플라잉디스크를 EDISON_CFD를 통해 해석하고자 한다. 받음각 $0^{\circ}$, $5^{\circ}$, $10^{\circ}$에 대하여 마하수 0.18, 단위 길이 당 레이놀즈수 $3.78{\times}10^{-5}/m$의 유동조건에서 2차원 범용 소프트웨어인 KFLOW_EDISION_13의 S-A Turbulent Model을 이용하여 지면과의 높이를 형상 코드길이를 기준으로 0.25c, 0.5c, 1c, 3c로 변경하면서 해석을 수행하였다. 그 결과 세 형상 모두 일반적인 지면효과인 지면과 가까울수록 양력계수는 증가, 항력계수는 감소하여 양항비가 증가하는 경향을 보여주었다. 하지만 일부 예외적인 부분을 확인하여 분석을 실시하였다.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.1
• /
• pp.59-66
• /
• 2022

In this paper, by applying IoT technology to the Ultimate game, which is one of the games using Flyingdisc, the process of the game is traced based on the players and the flyingdisc, and a comprehensive relationship analysis between players is performed on the results of the game. A WiFi module with built-in GPS is attached in the players and flyingdisc. The player's ID, latitude/longitude values received from GPS and time are stored in the database in realtime during the game. Process informations of the game is also stored in the database at the same time using mobile Ultimate game App. Based on this informations after the game is over, we developed a system that can perform comprehensive analysis of the game contents. By using the informations stored in the database, the player-based game process and the flyingdisc-based scoring process are visualized in the virtual playground. Various game result informations for players are graphically analyzed using Python.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.986-992
• /
• 2014

This research investigates experimentally and numerically the tilting angle, eccentricity ratio, flying height of axial direction, friction torque, and critical mass of the HDD disk-spindle system due to HDD positioning angle. The tilting angle and the eccentricity ratio are the maximum when the HDD positioning angle is $90^{\circ}$ respect to horizontal position because the external force in radial direction and the torque applied to the rotating part are the maximum when the HDD positioning angle is $90^{\circ}$. The flying height increases with the increase of the HDD positioning angle because the direction of gravity applied to the rotating part changes. The friction torque increases with the increase of the HDD positioning angle until it becomes $60^{\circ}$, and decreases with the increase of the HDD positioning angle after it becomes $60^{\circ}$. The stability is the maximum when the HDD positioning angle is $90^{\circ}$.