• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.543-547
• /
• 2004

The molding characteristics of large-sized orthogonal stiffened plastic plates were investigated in the present study. Models with the geometry of 1800$\times$600$\times$12mm and 1200$\times$600$\times$12mm were designed for injection molding(IM) and injection-compression molding(ICM), respectively. To determine a mold system and reduce the warpage of the presented model after molding process, IM and ICM analyses using MOLDFLOW$^{TM}$ were performed. Also, the experiments were performed to verify the suggested mold system. It was shown that the change of molding method could significant effect on the warpage of designed model.l.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.17-23
• /
• 2006

The strength estimation is carried out for injection molded plastic stepped gear. The stepped gear is considered as a plate model which is fixed by two edges and freed on the other sides. The stress of common normal gear is calculated by Lewis formula which can be derived quite simply from the equation fur the stress at the root of a cantilever beam. Stress ratio(step factor) between the common normal gear and stepped gear is proposed for the ratio of the bending stress of normal gear and that of stepped gear. This study proposes the step factor added in Dupont equation which is used for strength estimation of injection molded plastic stepped gear.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.71-78
• /
• 1999

The application range of injection molded parts is expanding by the development of engineering plastics with good mechanical properties. Plastic gears are specially used as automotive parts due to an excellent performance in the characteristics of a strength vs. weight, and the study of injection molding process of plastic gear using Nylon66 is performed in this study. Filling, packing and cooling analyses were done by using the simulation software like Moldflow, and a mold was designed by following the simulation results. Pin-point gates with three points were taken to satisfy the design guides like a full-shot, and lower clamping force and uniform shrinkage. Characteristics of shrinkage of molded gear and temperature difference between cavity and core sides of a mold were shown.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7729-7735
• /
• 2015

As plastic injection mold parts is suitable system mass production making mold. So thick steering wheel parts is desirable to carry out gas injection molding. Gas injection mold is skill to inject nitrogen gas postfilling melting raw material into mold. Gas injection mold have many advantage like retrenchment of material cost, upgrading the guality. etc. It was decided gate position to minimize warpage of parts analysis injection mold process using mold flow software and incase doing gas injection mold using normal p.p material. it occur big warpage. so it is object minimizing warpage of injection parts to change p.p material containing mineral 18% and removing fingering phenomenon trouble as changing gate position. Also in case carrying out gas injection mold, I did comparison and analysis to grasp shape flow in gas setting a standard gate after flowing in raw material. Through this study, I found out changing of thickness by parts shape and it can occur warpage of parts by plastic material even though it carry out gas injection mold and it had a direct influence on trouble of parts by gate position.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.457-458
• /
• 2012

• Resources Recycling
• /
• v.13 no.3
• /
• pp.43-49
• /
• 2004

In this study. an experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed ratio of recycled resin were selected as processing parameters for studying the effect of those conditions on the shrinkage and weight of molded parts. As a result, the shrinkage was increased with the higher mold and melt temperature and it was more sensitive to the change of mold temperature. On the other hand, the weight of molded parts was decreased with the increment of mold and melt temperature.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.412-420
• /
• 1993

플라스틱(수지)의 활용이 급격하게 증가함에 따라 사출성형의 중요성이 높아지고 있는 가운데, 사출성형시의 원가절감이 큰 관심사가 되어가고 있다. 원가절감의 일환으로 적절한 수지를 선정하는 일이 대두되는데, 사출성형의 재료로서 수지를 선정할 때는 성형후 사용환경에서 일정기능을 유지하도록 수지의 물성을 고려하여야 한다. 본 연구에서는 여러물성을 동시에 만족시켜야 하는 수지선정의 특수성을 감안하여 수지선정문제를 가치함수(Value Function)를 사용한 다목적 의사결정문제(Multi-Attribute Decision Problem)로 정형화하였다. 수지는 물성의 어느 범위에서는 수치의 작은차이가 중요하지만, 어느 범위에서는 크게 중요하지 않으므로 필요한 물성의 수준을 고려하여 선택을 하여야한다. 본 연구에서는 가치함수를 이용하여 이를 해결하도록 하였다. 가치함수는 Sigmoid함수를 사용하였고, 함수의 상수(parameter)를 조절하여 수지가 갖는 물성과 물성과의 관계를 평가하고 수지가 갖는 특성을 보다 정확하게 고려하여 수지선정이 되도록 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.168-171
• /
• 2003

Nano pattern structure is produced using the conventional injection molding and the MmSH method. Plastic parts using PC make used of the MmSH method is much better than the other about manufacture showed transcription of nano pattern. The conventional injection molding, transcription of plastic parts with nano pattern using HIPS showed better than PC. In the result, transcription of nano pattern improve when well liquidity and high temperature of mold surface.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.241-244
• /
• 2001

스냅핏은 일종의 결속장치로서 흔히 플라스틱 부품들을 서로 체결하는데 이용되는데, 다른 결속장치에 비해 간편하고 생산품의 조립단가를 줄일 수 있고, 또한 분리력은 큰 반면에 결합력은 작게 만들 수 있는 장점을 가지고 있어 널리 사용된다. 스냅핏의 설계는 재료에 따른 물성(property) 및 구조적 강성(stiffness)이 설계 초기단계에서 고려되어야 하고, 또한 사출성형공정에서 스냅핏의 성형성도 예측되어야 한다. 그러나 스냅핏의 형상, 치수, 위치 등을 적절히 설계합성(synthesis)하고 적절한 재료를 선택하는 작업은 공정에 관한 종합적인 지식을 지원해 주는 합리적인 설계도구가 제공되지 못했던 이유로 사출 전문가의 오랜 기간 축적된 경험과 지식에만 전적으로 의존하여 왔다. 본 연구에서는 기존의 전문가에 의존해온 스냅핏 설계방법을 개선하기 위해 사출성형에 의해 제한되어지는 지식을 규칙베이스화하고 재료의 물성과 스냅핏의 형상 및 치수에 파라 스냅핏이 갖는 결합력, 분리력, 변형하중 및 허용언더컷 등을 출력하는 지적 설계 프로그램을 제안하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.147-150
• /
• 2002

사출성형 공정의 컴퓨터 시뮬레이션(CAE)은 짧은 시간에 저 비용으로 여러 설계 및 재료와 공정조건의 조합을 시험할 수 있는 수단이다. 실제 금형을 가공하고 시제품을 생산하기 전에 미리 해석을 수행하여 봄으로써 설계의 오류 및 부적절한 공정조건의 설정을 방지할 수 있다. 컴퓨터 시뮬레이션은 공정조건에 의한 사출성형을 가능하게 해 준다. 즉, 수지의 거동, 냉각과정, 압력거동 등을 컴퓨터 화면을 통해 볼 수 있으며 이를 기초한 성형품의 예상문제점을 파악할 수 있다. 본 논문에서는 CAE기술을 응용한 Back Light Panel의 설계에 대해 논의하고자 한다.