• Title/Summary/Keyword: 프로판 연료

Search Result 59, Processing Time 0.018 seconds

LPG산업 경쟁력과 정부의 역할

  • Jeong, Gyu-Hun
    • LP가스
    • /
    • s.102
    • /
    • pp.4-5
    • /
    • 2006
  • 실제로 프로판은 서민연료임에도 특별소비세가 40원/kg이 부과되고 있으며, 이는 당초 특소세 부과취지에 맞지 않으므로 폐지해야 한다는 의견이 지배적이다.

  • PDF

Mixing Characteristics of Sequential Blending with DME and LPG in Mixing Drum (DME-LPG 순차 혼합시 저장탱크 내의 혼합특성)

  • Cheon, Suk Hoon;Kim, Cha Hwan;Shin, Dong Woo;Kim, Lae Hyun;Lee, Hyun Chan;Baek, Young Soon
    • Korean Chemical Engineering Research
    • /
    • v.50 no.3
    • /
    • pp.464-470
    • /
    • 2012
  • To study characteristics of DME and Propane blended fuel in mixing drum as time passed, mixing experiment of two components was performed. After 20 wt% of DME and 80 wt% of Propane were injected into mixing drum sequentially, and the mixture ratio of blended fuel was analyzed at several sampling ports. Consequently, DME and Propane were not easily mixed and DME was sunk to the bottom of the mixing drum by the density difference. The daily rate of DME ingredient increase was 0.2-0.3 wt%, and it took over 500 hours until two of them were mixed uniformly. And after recirculation of blended fuel in mixing drum, DME and Propane were mixed immediately and uniformly.

인터뷰-한국LP가스공업협회 권순영 전무

  • Korea LPGas Industry Association
    • LP가스
    • /
    • s.103
    • /
    • pp.4-5
    • /
    • 2006
  • 정부는 영세서민들의 연료인 프로판에 부과되는 특소세를 폐지하고, 소형저장탱크의 원활한 보급을 위한 법적 기준 완화, LPG와 LNG간 균형적인 정책 추진 등을 통해 사업을 뒷받침해야 할 것이다.

  • PDF

취임사

  • Yu, Su-Ryun
    • LP가스
    • /
    • s.105
    • /
    • pp.4-5
    • /
    • 2006
  • 우리는 현재 프로판산업의 경쟁력강화를 위해 배송센터 시범사업을 시행중에 있고, 소형저장탱크 보급 활성화, LPG+DME혼합연료 보급을 위한 연구, 자동차사의 LPG신차출시, 경승용차의 LPG화, 저공해LPLi차 기술개발 등 현안과제가 산적해 있습니다. 모든 과제들이 최선의 방향에서 원활히 해결될 수 있도록 지혜를 모아야 하겠습니다.

  • PDF

대형 디젤대체용 LPG 엔진개발

  • Gang, Geon-Yong
    • LP가스
    • /
    • s.71
    • /
    • pp.49-53
    • /
    • 2000
  • 대형디젤엔진의 대체용으로 LPG 엔진을 개발함에 있어서 차세대 연료공급방식인 LPG 연료의 액상분사방식을 채택하여 기존의 믹서방식의 연료공급시스템을 가진 LPG 엔진보다 고출력, 고효율, 저공해성을 추구하고자 하였다. 이를 위한 기초연구로서 먼저 단기통 연소엔진을 이용하여 대형엔진에 LPG 연료 적용 가능성, 액상분사 시스템을 포함한 여러 가지 연료공급방식에 따른 엔진의 성능파악, 대형엔진에 적합한 최적 선회비의 결정, 연료조성에 따른 엔진성능의 변화 등을 알아보았다. 실험결과, 대형엔진에 LPG 연료의 적용은 아무런 문제점이 없었으며 LPi 연료공급방식은 다른 방식에 비해서 10%정도의 체적효율 및 출력의 증가를 확인할 수 있었다. 최적의 선회비는 2.0 부근에서 형성되었고, 연료 조성은 프로판 대 부탄의 비율이 60 : 40에서도 정상적으로 운전됨을 확인하였다. 시제품 엔진의 경우, 과급방식의 KL6i 엔진을 개발하기 앞서 좀더 기술적 접근이 용이한 자연흡입방식의 K-1엔진의 개발이 선행되었으며 현재 개발 진행중인 K-1엔진의 성능평가 결과, 기존의 디젤엔진에 비해 출력성능이 20% 정도 향상됨을 확인할 수 있었다. 특히 대형차량에서 중요시 생각되는 저속토크 성능이 매우 우수한 것으로 파악되었다. 이러한 결과를 바탕으로 단기통 연소엔진에서 확인된 최적화된 연료조성과 선회비를 향후 K-1엔진에 적용할 예정이다. 최근 열린 가스학회 추계발표회와 LPG자동차세미나의 주요내용을 게재한다.

  • PDF

The Methods for Reducing NO Emitted from a Combusfor (연소로에서 방출되는 NO를 저감시키기 위한 방법)

  • 이기용;남태형
    • Journal of Energy Engineering
    • /
    • v.9 no.4
    • /
    • pp.288-294
    • /
    • 2000
  • 본 논문은 1차와 2차 연료 라인을 설치한 실제 연소로에 형성된 프로판 난류화염으로부터 방출되는 NO의 생성변화를 연구하였다. 1차 연료는 버너의 노즐로 일정하게 공급되고, 추가적으로 2차 연료는 맥동되거나 또는 일정한 양이 첨가되었다. 2차 연료를 공급 튜브의 위치를 주 연료 튜브의 중심 또는 보염기 주위에 설치하였다. 연소로의 출구에서 화학종 $O_2$,CO, $CO_2$, NO와 HC(미연 탄화수소)의 평균 농도를 측정하였다. 당량비가 증가함에 따라, 후자의 방식에서의 NO 농도의 분포는 전자의 방식에서 보다 더 천천히 증가하였다. 당량비가 0.5에서 0.54 범위에서는 전자의 방식보다 후자의 방식이 NO 생성을 dir 35%까지 감소시켰다. 2차 연료의 맥동에 대한 NO에서도 변화의 영향은 2가지 방식에서 모두 나타나지 않았다.

  • PDF

난류확산화염에서 산소부화가 NO생성에 미치는 영향에 관한 실험적 연구

  • 채전우;전영남;김영권
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.4
    • /
    • pp.1022-1032
    • /
    • 1990
  • 본 연구에서는 기체연료 연소시 산소부화연소의 적용에 대한 연구를 시작하는 단계에서 상용 프로판을 산소부화연소 시킴으로써 첨가된 산소에 의한 반응시간의 단 축과 공급 공기량중의 질소량 저감에 희한 연소가스중의 NO농도를 측정하고, 이에 따 른 화염장의 온도 및 연소가스중의 $O_{2}$ 및 N$_{2}$농도를 측정하여 그들의 상관관 계를 가지고 NO의 배출특성을 고찰함으로써 기체연료의 산소부화연소에 따른 효율적인 에너지 이용을 위한 연소장치개발과 오염물질 저감대책에 기초자료를 제공하는데 그 목적이 있다.

The Combustion Characteristics with Supply Conditions of Propane Fuel at the Constant Volume Combustion Chamber (프로판 연료의 공급조건에 따른 정적연소실내 연소 특성에 관한 연구)

  • Park Kyoungsuk
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.28 no.10
    • /
    • pp.1172-1177
    • /
    • 2004
  • The emission control of automobile has been intensified as a part of the countermeasure to decrease air pollution in the world. As the cars with an alternative fuel starts to get into the spotlight, the cars with low emission has been introduced and exhaust gas regulation forced in this country. These days, LPG vehicles, which infrastructure of fuel was already built up, and CNG vehicles are recognized for alternative fuel cars in this country. In this study, the constant volume combustion chamber was manufactured and used for experiments to obtain the combustion characteristics of propane mixture. The combustion characteristics was analyzed, with the change of supply conditions of propane fuel. Inside the combustion chamber, the maximum temperature increase with the initial pressure is going up. The burning velocity also seems to have the same characteristic as the temperature. However, the heat flux do not change much according to the theoretical correct mixture but it changes with the various initial temperature of the combustion chamber.

A Study on the Combustion and Explosion Characteristics According to Mixing Ratio of Gas (가연성 가스의 혼합비에 따른 연소 및 폭발특성에 관한 연구)

  • Oh Kyu-hyung
    • Journal of the Korean Institute of Gas
    • /
    • v.9 no.4 s.29
    • /
    • pp.50-56
    • /
    • 2005
  • Liquefied Petroleum 6aso-PG) is combustible gas which used for fuel for domestic and automobiles. A research for adjust a component of LPG to improve the fuel characteristics and control the manufacturing process of that is carrying in petrochemical industry. Some kinds of LPG blending is considered as a adjusting method to control component of LPG. LPG is mainly propane for domestic use and butane for automobile use but propylene and butylene also a kind of LPG Change of explosion characteristic and combustion gas component by mixing of propylene in propane and butane was measured and analysed in this research. Based on the result of experiment, it was found that explosion pressure and pressure rise rate was slightly increased with mixing rate of propylene and it was considered the possibility of increasing the CO concentration in combustion gas with increase the mixing rate of propylene.

  • PDF

Effect of Hydrogen(H2) Addition on Flame Shape and Combustion Products in Mixed Coflow Diffusion Flames of Methane(CH4), Ethane(C2H6) and Propane(C3H8) (동축류 메탄(CH4), 에탄(C2H6), 프로판(C3H8) 혼합 확산화염내의 수소(H2) 첨가가 화염 형상 및 연소 생성물에 미치는 영향)

  • Park, Ho-Yong;Yoon, Sung-Hwan;Rho, Beom-Seok;Lee, Won-Ju;Choi, Jae-Hyuk
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.25 no.6
    • /
    • pp.780-787
    • /
    • 2019
  • As a carbon-free, green growth alternative, internal and external interest in hydrogen energy and technology is growing. Hydrogen was added to co-axial methane, methane-propane, and methane-propane-ethane diffusion flames, which are the main ingredients of LNG, to evaluate its effect on flame formation and combustion products. The variation in combustion products produced by adding hydrogen gradually to diffusion pyrolysis at room temperature and normal pressure conditions was observed experimentally by using a gas analyzer, and the shape of diffusion pyrolysis was observed step by step using a digital camera. The experimental results showed that the production volume of nitrogen oxides tended to increase and became close to linear as hydrogen was added to the diffusion pyrotechnic. This is because the relatively high temperature of heat insulation and fast combustion speed of hydrogen facilitated the production of thermal NOx. On the other hand, CO2 production tended to decrease as hydrogen was added to reduce the overall carbon ratio contained in the mixed diffusion flame of methane, methane-propane, and methane-ethane-propane. This means that the mixed fuel use of LNG-hydrogen in ships may potentially reduce emissions of CO2, a greenhouse gas.