• Computational Structural Engineering
• /
• v.2 no.2
• /
• pp.17-19
• /
• 1989

건축구조물의 이차원 해석을 위한 SWAN88은 한국과학기술원의 이동근 교수에 의하여 개발되었으며 소프트웨어센터를 통해서 보급되고 있다. SWAN88은 보와 기둥으로 구성된 프레임이나 여기에 전단벽이 추가적으로 사용된 구조물의 해석이 사용될 수 있으며 개인용 컴퓨터를 사용하여 짧은 시간내에 상당히 큰 구조물의 해석이 가능하도록 개발되었다. 사무소건물, 아파트, 호텔, 병원 및 학교건물 등과 같이 규칙적인 형태의 구조물에 대한 해석에 매우 효율적인 SWAN88은 주택, 공장, 창고, 격납고 또는 체육관 등과 같이 보, 기둥 및 전단벽 이외에 트러스나 아취 등이 사용되는 구조물의 해석에는 적합하지 않다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.77-83
• /
• 1986

In this paper, an accurate model for structural analysis of frames with shear walls is introduced. Static and dynamic analysis of two example structures has been performed using the computer program SWAN which employes the newly developed 12 degrees of freedom plane stress element and the results are compared to those obtained using SAP IV. The 12 degrees of freedom element resulted in improved shear stress distribution in wall elements and bending moment in beam elements.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.102-105
• /
• 2003

본 논문에서는 오리 사육장치를 제작하기 위하여 오리의 습성에 맞게 사육장치를 설계하였다. 또한 오리의 먹이는 음식물 쓰레기로 하고, 오리의 분뇨는 콘베이어 벨트로 수거하여 지렁이의 먹이로 사용함으로서 음식물 쓰레기를 줄이고, 지렁이에 의한 분변토를 얻을 수 있어 환경오염을 줄일 수 있는 새로운 시스템을 설계하였다. 사육장치의 프레임은 3차원 유한요소해석 코드인 ANSYS로 구조해석을 실시하여 안전성을 검토하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.209-216
• /
• 2020

In this paper, parametric structural analysis is presented utilizing the co-rotational(CR) shell analysis utilizing EDISON. CR shell analysis shows faster convergence than the commercial software, NASTRAN, does. The 1st natural frequency of the rear frame is obtained, which is close to that of the engine during high speed cruise. Three cases under two design variables are presented and analyzed. Gusset is shown to be more effective among those which feature the same weight change. The results presented in this paper will be applicable for further researches to improve the durability of a motorcycle rear frame.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.87-92
• /
• 2000

This study is object to structural analysis of running machine frame. The finite element model was developed to compute the stress, strain and natural frequency for running machine frame. For structural analysis using result from FEM Code. In other to structural analysis of running machine frame, many variables such as load condition, boundary condition and weight condition are considered.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.85-90
• /
• 2001

This study is object to structural analysis of household running machine frame. The finite element model was developed to compute the stress, strain and natural frequency for household running machine frame. For structural analysis using result from FEM Code. In other to structural analysis of household running machine frame, many variables such as load condition, boundary condition and weight condition are considered.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.81-86
• /
• 2000

For on-shore structures, dynamic analysis becomes increasingly important as the water depth increases and the structural configuration becoines slenderer. In this study, an estimation method for equivalent three dimensional (30) hydrodynamic coefficients is introduced as a part of beam permutation technique development. The beam pemlUtation technique is being developed for obtaining an equivalent beam to a frame structure in order to reduce the degrees of freedom and thus the analysis time significantly. Two 3D structures are used in order to verify the obtained equivalent 3D hydrodynamic coefficients. Two commercial softwares, ANSYS and SACS, are used for the verification. The results of the present analysis are found to be satisfactory in comparison with those by the two softwares.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.57-66
• /
• 1989

In this paper, a theory for the static analysis of large plastic deformations of 3-dimensional frames, aiming at application to the collapse analysis of ship structures, is presented. In the frame analysis formulation, effects of shear deformations are included. A plastic hinge is inserted into the field of a beam end, and post. failure deformation of the plastic hinge is characterized by finite rotations and extensions. In order to model deep web frames of ship's structures into a framed structures, collapse of thin-walled plate girders is investigated. The proposed analysis method is applied to several ship structural models in the references.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.383-394
• /
• 2016

This study is intended to predict the seismic behavior of the down-scaled 3-story steel frame structures subjected to the real ground motion, and evaluate their structural damage through advanced finite element (FE) analysis results. The FE frame models are designed by considering the effect of the soft story. In addition, the effect of structural asymmetry is also taken into consideration during the nonlinear dynamic analyses. After observing the analysis results, it is reconfirmed that the damage of the steel frame building under the ground motion should be governed by the soft story column rather than the structural mass asymmetry.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.742-745
• /
• 2010

본 논문은 초고층구조물의 해석방법으로 탄성변형과 아울러 시간의존성을 가진 크리프와 건조수축에 의한 비탄성변형을 고려한 비선형 시공단계 해석법을 제시한다. 기존의 초고층구조물 해석에서 주로 행하는 기둥 축소량 해석은 실무자의 경험과 프로그램을 통한 간략화에 맞추어져 있다. 이는 실제 시공 시 발생하는 구조해석 요소들을 충분히 반영하지 못하여 계산 값과 실제 값 사이에 오차가 발생된다. 비선형 시공단계 해석은 실제 시공 때 발생되는 해석변수들을 고려한 단계별 해석의 수행이 가능하며, 시간의 의존성을 가진 creep과 shrinkage의 효과를 함께 고려하여 일괄해석의 문제점을 구조해석 단계에서 실제상황에 가까운 해석을 가능하게 할 수 있다. 이를 위해 시공단계해석이 가능한 범용 프로그램을 이용한 50층 규모의 3차원 골조 프레임 모델 예제 해석을 통하여 기존 해석법들과의 비교, 분석으로 시간의 의존성을 고려한 시공단계해석의 필요성을 제시한다. 본 논문에는 범용프로그램인 SAP2000(ver.14)와 CEB-FIP모델 코드를 사용 하였다.