• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6977-6984
• /
• 2015

It is faced with the necessity of multi roll forming process of the ball slide rail which is made by adding the separate manufacturing processes, piercing, bending, trimming, to the roll forming process of a continuous plastic deformation, to improve the quality. However, the vibration and noise of the press machine in this process leads to the quality degradation of slide rail manufactured in this process. In this study, the roll was designed considering the optimal strain rates by the roll forming program with finite element method. And to estimate the static stability of the multi process the Von-Mises stress and deformation on the press was calculated with a structural analysis program. Also, to avoid driving systems in the resonance region their natural frequencies in the 1st and 2nd mode were calculated through the modal analysis. To verify its dynamic stability improvement the magnitudes of noise and vibration in the existing and studied system were compared using a microphone and accelerometers. And the widths and surface roughnesses of the rails which had been produced in the existing and studied process were measured. Therefore, it is known that multi roll forming process is stable in the analytical and experimental study.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.607-610
• /
• 2011

본 논문은 하이브리드 자동차 및 전기자동차의 고주파 발생시 전자파를 차단하는 역할을 하는 인버터 실드쉘의 단공정 스트립 레이아웃과 금형제작에 관한 연구이다. 현재는 일본에서 금형을 수입하여 7벌 단공정 금형방식으로 개발하여 65톤 프레스에서 시험생산하고 있는 중이다. 이에 본 논문에서는 단공정 금형의 스트립 레이아웃을 분석하여 프로그레시브금형설계 및 제작시 원가경쟁력을 갖추기 위하여 연구하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.55-57
• /
• 2005

기존의 장신구 은제품은 무르고 주조공정 특유의 미세한 표면결함을 가져서 착웅 중 쉽게 변색되는 문제가 있었다. 본 연구에서는 내식성을 향상시키기 위해 $92.5\%Ag-6.5\%Cu-1\%Zn$의 삼원계 은합금을 기초 소재로 해서 반지장신구를 상정하여 기존의 주조공정으로 대략의 형태를 만들고 금형과 유압프레스로 성형 가압시켜서 적극적으로 주조 시에 발생한 미세기공을 제거하고 결정립을 미세화하여 표면경도와 밀도를 향상시켰다. 선반가공과 미세연마를 실시하여 내식성이 향상된 표면과 기존 주조공정에 비해 3배 이상 향상된 경도를 가져서 스프링백 효과에 의해 귀보석을 세팅할 수 있는 개선된 텐션형 은장신구 공정을 개발하였고 이때의 최적 성형 정도를 확인하였다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.489-501
• /
• 1997

국내에서 생산되는 자동차부품이 국제적으로 경쟁력을 갖춘 제품이 되기 위해서는 불량률이 적어도 100 ppm 이하가 되어야 한다. 본 연구의 목적은 검사와 계측이 동시에 필요한 자동차 부품 제조 공정에 불량률 최소화 달성을 위한 산업체의 필요에 맞도록 머신비전을 이용하여 검사/계측 자동화시스템을 개발하는 것이다. 이 시스템은 생산부품을 전수검사하고 불량품을 100% 발견하는 것은 물론 데이터를 통계적으로 분석하여 이상원인이나 공정의 변화가 있을 때 이를 빨리 발견하여 많은 불합격품이 만들어지기 전에 공정을 조사하고 수정할 수 있는 조치를 취할 수 있도록 하였다. 이는 정확한 최신 데이터로 신속한 경향관리가 가능하도록 하는 것이며, 품질의 예방관리를 실현하는 것이다. 털 논문에서는 구체적 응용사례로서 자동차 Door inner panel의 프레스 공정에 대한 검사/계측시스템을 예시하였다.

• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.248-252
• /
• 2014

In this paper, press and nut runner used in press-fit or tightening the bolts and nuts at assembling process of automobile parts companies continually demand accuracy and improved productivity. Simultaneous control of production systems through synchronization configuring of the combination multi press-fit system developed multi servo press system using the low-speed serial communication. As a result, the accuracy and the productivity is improved and product quality improvement could be achieved.

• Composites Research
• /
• v.27 no.6
• /
• pp.254-259
• /
• 2014

In this study, a device and pressure press process that is able to substitute autoclave process is developed. This process complements disadvantages of autoclave process which are long process-time and high production cost. The developed device provides air pressure as well as the vacuum which are greatest feature of autoclave process. The device is sealed using hydraulic pressure to keep the air pressure inside the mold. The transfer of the heat is designed to be direct. The heating and pressure charging time are decreased by reducing the interior space. Tooling cost is reduced dramatically compared to autoclave process. Spring-back phenomenon is measured and compared. The temperatures of several parts of the mold during molding are measured. The fiber volume fraction of the parts molded by autoclave process and by the developed process are compared.

• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.24-34
• /
• 1995

여기서는 최근의 자동차 금형의 최적설계 기술개발을 위한 국내의 연구동향을 중심으로 살펴보고 실제 CAE 기술의 적용 예를 소개하고자 한다. 1. 금형설계에서의 CAE 기술의 도입. 2. CAE 기술로서의 FEA 해석. 3. CAE 도입의 기술적 제 문제. 4. 프레스 공정의 2차원/3차원 해석. 5. 최적 블랭크 형상설계기술. 6. 강건설계를 위한 CAE 기술의 응용.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1013-1014
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.33-34
• /
• 2010