• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.183-195
• /
• 2012

This study conducted comparative analysis to estimate critical velocity in tunnel fire under variation of grid number and the location and size of the fire source using three-dimensional computational fluid dynamics. In the target tunnel, by one-dimensional way, the calculated critical velocity in the tunnel, 2.22 m/s was estimated, if appling hydraulic diameter, instead of the tunnel height. According to six numerical analysis, each grid number has different position, temperature, and CO concentration of back-layering. In the case of the subject, the case 1 with 0.84 million grid was found to be the most ideal. According to the location and size of the fire source, after three cases for three-dimensional numerical analysis was performed, it is resulted that the location and size of the fire source affect the critical velocity, because air velocity distribution, temperature distribution and CO concentration distribution showed different each case. This is due to the difference of heat exchange area and locations. Therefore, it is necessary to decide appropriate grid number, and the location and size of the fire source for processing techniques through comparison with actual experiment results and three-dimensional analysis.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.2
• /
• pp.23-30
• /
• 2013

A dynamic analysis of random vibration processes is concerned with the first excursion probability based on first passage time during some specified lifetime or duration of the excitation. This study is concerned with the estimation of first-passage probability for hazard fluctuate wind velocity in the major cities reflecting the recent meteorological with largest data samples (yearly 2003-2012). The basic wind speeds were standardized homogeneously to the surface roughness category C, and to 10m above the ground surface. In this paper, the hazard fluctuate wind velocities are treated as a time-independent (stationary) random process and Gaussian random processes. The first excursion probability were calculated from Poisson model based on the independent event of level crossing & two-state Markov model based on the envelopes of level crossing.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.6 no.1
• /
• pp.36-43
• /
• 1977

온도분포, 농도분포를 가미한 비압축성 유체의 기초방정식을 토출$\cdot$흡입이 있는 2차원 폐공간에 적용하고 시간공간에 차분근사로써 얻은 수치해에 대하여 서술했다. 이와같은 방법에 대해서는 미해결의 요소가 많이 있으나, 여기서는 토출풍속$\cdot$온도차$\cdot$격자수를 변화시킬 때의 해가 변화하는 모양을 계산예에 따라서 보고한다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.58-59
• /
• 2000

오존은 공간적.시간적 변동이 매우 큰 대기오염물질로 서울시의 27개 대기오염 자동측정망에서 실시간으로 측정.감시되고 있으며, 오존의 농도가 높아지는 여름철에는 오존경보제를 실시하고 있다. 특히 오존의 농도는 일사, 풍향, 풍속 등의 기상인자, $NO_x$, VOCs 등 전구물질의 농도, 그리고 지형에 따라서 영향을 받는 것으로 알려져 있다. 따라서, 본 연구에서는 서울지역에 대한 기하학적 축소모형을 제작하여 풍동내에서 풍향.풍속을 측정하여 지형에 따른 바람의 특성을 파악하였다. (중략)

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.2
• /
• pp.63-77
• /
• 2022

Our aim was to reduce estimation errors of a wind velocity model used as an early warning system for weather risk management in the agricultural sector. The Rural Development Administration (RDA) agricultural weather observation network's wind velocity data and its corresponding estimated data from January to December 2020 were used to calculate linear regression equations (Y = aX + b). In each linear regression, the wind estimation error at 87 points and eight time slots per day (00:00, 03:00, 06:00, 09.00, 12.00, 15.00, 18.00, and 21:00) is the dependent variable (Y), while the estimated wind velocity is the independent variable (X). When the correlation coefficient exceeded 0.5, the regression equation was used as the wind velocity correction equation. In contrast, when the correlation coefficient was less than 0.5, the mean error (ME) at the corresponding points and time slots was substituted as the correction value instead of the regression equation. To enable the use of wind velocity model at a national scale, a distribution map with a grid resolution of 250 m was created. This objective was achieved b y performing a spatial interpolation with an inverse distance weighted (IDW) technique using the regression coefficients (a and b), the correlation coefficient (R), and the ME values for the 87 points and eight time slots. Interpolated grid values for 13 weather observation points in rural areas were then extracted. The wind velocity estimation errors for 13 points from January to December 2019 were corrected and compared with the system's values. After correction, the mean ME of the wind velocities reduced from 0.68 m/s to 0.45 m/s, while the mean RMSE reduced from 1.30 m/s to 1.05 m/s. In conclusion, the system's wind velocities were overestimated across all time slots; however, after the correction model was applied, the overestimation reduced in all time slots, except for 15:00. The ME and RMSE improved b y 33% and 19.2%, respectively. In our system, the warning for wind damage risk to crops is driven by the daily maximum wind speed derived from the daily mean wind speed obtained eight times per day. This approach is expected to reduce false alarms within the context of strong wind risk, by reducing the overestimation of wind velocities.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.379-386
• /
• 2007

In this paper, topographic factors over 3-dimensional hills were estimated through wind tunnel tests. Topographic models having five different slopes of $5.71^{\circ}, \;11.31^{\circ},\;16.70^{\circ},\;21.80^{\circ}$, and $26.57^{\circ}$ which were based on Korean Building Code(KBC(2005), were made for wind tunnel tests. From the result of wind tunnel tests, topographic factors over 3-dimensional hills were obtained at various locations, and the ranges of topographic effects were decided. The ranges of topographic effects was whole area of the hills in the horizontal ranges and heights of 3.5 times of the hills in the vortical ranges. Topographic effects was large at the top of hills, and wind velocity was increased 57% over hill of $5.71^{\circ}$, 75% over hill of $11.31^{\circ}$, 79% over hill of $16.70^{\circ}$, 81% over hill of $21.80^{\circ}$, and 61% over hill of $26.57^{\circ}$. Wind velocity was bigger over surface of across-wind direction of hills than one over surface of wind direction of hills, and wind velocity was increased $10{\sim}30%$ at locations of across-wind direction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.667-673
• /
• 2019

Global warming may accelerate climate change and may increase disaster caused by strong winds. This research studied a method for a nonstationary frequency analysis considering the linear trend over time. The Bayesian method was used to estimate the posterior distribution of the parameters for the extreme value distribution of the annual maximum wind speed at Jeju Airport. The nonstationary frequency analysis was performed based on the Monte Carlo Markov Chain simulation and the Gibbs sampling. The estimated wind speeds by nonstationary frequency analysis was larger than those by stationary analysis. The conventional frequency analysis procedure assuming stationarity is likely to underestimate the future design wind speed in the region where statistically significant trend exists.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.369-374
• /
• 2002

최고급 품질의 홍삼제조를 위한 공정을 개발하고자 건조기를 제작하였다. 건조기는 온도, 습도의 계측이 가능하고 이를 컴퓨터와 연결하여 사용자가 원하는 온도, 습도로의 제어가 가능하도록 설계하열다. 건조기의 작업용량은 1회에 원료수삼 30지가 처리되도록 설계되었다. 이를 위한 건조챔버의 크기는 6년근 1등급 수삼의 크기를 고려하여 700$\times$700$\times$1500mm로 결정하였고 건조과정중의 수삼의 상태변화를 알기 위하여 건조챔버 전면에 유리를 설치하여 육안 관찰 및 영상처리장치에 의한 모니터링이 가능하도록 하였다. 수삼의 균일한 건조를 도모하기 위하여 대나무 채반을 속도조절이 가능한 모터와 체인을 이용하여 챔버 내에 서 0~10rpm의 속도로 회전되도록 설계하였다. 그리고 건조시 챔버 내의 공기상태 계측 및 제어용 프로그램을 개발하였다. 제작된 홍삼제조용 건조기의 성능 평가결과 설정된 온도와 습도를 정밀하게 계측제어 할수 있었으며, 원하는 건조수준을 유지는데 성공했다. 건조기 내부에서의 온도 분포와 풍속분포를 SAS통계 package GLM을 이용하여 유의수준 5%의 범위에서 Student T~test를 한결과, 계측지점간의 유의 차가 없어 온도와 풍속의 분포가 균일한 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.929-936
• /
• 2015

Nacelle anemometers are mounted on wind-turbine nacelles behind blade roots to measure the free-stream wind speed projected onto the wind turbine for control purposes. However, nacelle anemometers measure the transformed wind speed that is due to the wake effect caused by the blades' rotation and the nacelle geometry, etc. In this paper, we derive the Nacelle Transfer Function (NTF) to calibrate the nacelle wind speed to the free-stream wind speed, as required to carry out the performance test of wind turbines according to the IEC 61400-12-2 Wind-Turbine Standard. For the reference free-stream wind data, we use the Light Detection And Ranging (LiDAR) measurement at the Shinan wind power plant located on the Bigeumdo Island shoreline. To improve the simple linear regression NTF, we derive the multiple nonlinear regression NTF. The standard error of the wind speed was found to have decreased by a factor of 9.4, whereas the mean of the power-output residual distribution decreased by 6.5 when the 2-parameter NTF was used instead of the 1-parameter NTF.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.22-27
• /
• 2014

In this study a Fuel bed where surface fire spreads through is made to measure the data such as the flame height, radiation, spread rate and temperature distribution of Fuel bed. As experimental variables species of trees, wind velocities and slop are chosen. Fallen leaves of Quercus Variabilis (Q.V.) and Pinus Densiflora (P.D.) are used as fuel. Wind velocity is controlled by simply designed wind turnnel from 1 to 5 m/s. Slope of fuel bed is changed from $0^{\circ}$ to $30^{\circ}$. For the measurements of temperature distribution and spread rate total 35 of K-type 1.6 mm thermocouples are positioned as a lattice design. Radiant heat flow meters are used besides video camera and thermovision camera.