• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.317-319
• /
• 2005

In this paper, control algorithm for torque ripple compensation in DFIG wind power generation system is proposed. A simple PI controller is designed for the negative sequence voltage cancellation using negative sequence currents in the grid-side converter. As a result, the stator voltage contains only the positive sequence components and the torque pulsation of the generator is effectively compensated. Propose algorithm is confirmed with PSCAD simulation model.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.245-248
• /
• 2006

The first of korean 750kW gearless type wind turbine is developed. The wind turbine is designed, manufactured and tested by GE regulation and obtained the design certificate by GL. And the performance test is being performed at the demonstration site now. This paper presents the history of development and performance test for 750kW gearless type wind turbine.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.304-307
• /
• 2006

Recently, as the global warming by fossil fuels and the steep rise of the oil price become social issues, the interest for renewable energy producing system is increasing rapidly. Among these, the wind turbine is most highlighted because of its economic competitiveness. The tower is one of the main components of wind turbine, which occupying about 20% of overall turbine costs. The tower access door located to base part of the tower, is used to enter the tower. This is the main structural weak points because of door hole, weldment, etc. And so are the weldments between the cans and the flanges. In this study, for the top flange part of the tower, by FEM using ANSYS, we retrieved the maximum von Mises stress on that and carried out fatigue analysis using stresses at such weak points.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.249-252
• /
• 2006

Wind turbine gearbox is a complex mechanical system that includes gear trains, shafts, bearings, and gearbox housings. All these component are interacting with each other therefore changing certain design parameter will affect other components. RomaxDesigner enables a reduction in development period by simulating the full gearbox system. The gear pairs, bearings and shafts are represented as analysis objects and the complex components are modelled by means of reduced stiffness matrices. The software allows durability analysis and advanced contact analysis including the effects of system misalignments in gear and bearing. In this paper the 2MW wind turbine gearbox was model led and a study on optimum design was conducted

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1032-1039
• /
• 2001

In this paper, modal analysis of wind-power generator rotor system was performed by using finite element method. Experimental modal analysis of generator rotor system was performed and the result were compared with analytical ones. Sensitivity method and localized modification method were used to update finite element model. As a result of updating finite element model, errors of natural freguency were reduced within 0.5％ and MAC value was improved near by l. Stability characteristics of wind-power generator rotor-bearing system through harmonic analysis about several external force will be analyzed using finite element model.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.414-415
• /
• 2019

본 논문은 HVDC(High Voltage Direct Current)에 적용된 MMC(Modular Multilevel Converter)의 제어 알고리즘 개발을 위한 HILS(Hardware In the Loop Simulation)을 위한 모델링 및 HILS 시스템 구축 예를 보인다. 전력 계통, MMC, 풍력 발전 등의 HILS 적용 MATLAB/SIMULINK 모델 및 FPGA(Field Programmable Gate Array)를 이용한 제어기 개발 내용을 보인다. 시뮬레이션 모델과 FPGA 제어기를 이용하여 구축한 OPAL-RT 기반의 실험 결과를 보인다.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.17-23
• /
• 2012

The installed capacity of wind turbines in Korea are growing and enlarging by the central government's supporting program. But the majority area having the abundant wind energy resources is composed of mountainous and complex district, thus the turbulence intensity of there is so high and belongs to the turbulence characteristic A category of IEC design requirement. This paper presents the effect of the turbulence intensity on the power performance of a wind turbine system. Particularly, the effect of the power curve of the wind turbine system due to the turbulence intensity has analyzed. As a result, the power curve has a high turbulence characteristic shows the lower value than normal one in high wind speed regime and the AEP will be reduced at the relatively high turbulence area.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2017

This study presents an example of conceptual design for hollow circular section multi-column tower system subjected to 10MW level wind load by introducing a method based on member utilization that examine both structural stability and economical efficiency. The basic assumptions for the proto type of a multi-column tower that can replace a single-cylinder tower were suggested and structural models were constructed following the assumptions and analyzed for identifying member forces. Based on the calculated member strengths and acting loads, the member utilization of the proposed multi-column tower structures were calculated for axial force, shear, bending and torsion and evaluaed for suitability as a wind tower. Design parameters such as steel tube dimensions, slenderness ratio, and number of floors for braces was proposed in the acceptable range of member utilization for conceptual design of multi-column wind towers.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.81-90
• /
• 2012

Recently, with an increased social interest in new and renewable energy resources, together with rapid advancement in IT(information technology) and spatial information technology, there have recently been a lot of attempts to find out methods to make systematic and scientific use of information technology and spatial information technology, depending upon a fusion with GIS(Geographic Information System) spatial information technology in the field of new and renewable energy. This paper developed a suitability analysis system to conduct a correct and precise analysis of an ideal place for wind energy facilities in comprehensive consideration of topographic, economic, and cultural environments. It also used recent spatial information technology including 3D GIS to develop a supportive system for an analysis and decision making of an ideal place for 3D Web GIS-based wind energy facilities like a precise field information implementation, a 3D result display, a 3D object implementation, simulation, and so on. These systems make it possible to build scientific new-renewable energy facilities, to collect, manage and analyze information in an accurate and quantitative manner. In addition, they help serve as a turning point for the construction of a real-time information supply system. Furthermore, they can support rational decision making by making it possible to analyze a variety of forms of field information through building a system for the management of 3D image-based information on new-renewable energy resources.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.3-6
• /
• 2011

본 논문에서는 배전지능화시스템과의 정보연계, 미래 지능형전력망 운용 및 태양광, 풍력, 연료전지 등과 같은 신에너지전원의 단지를 효율적으로 유지, 관리하기 위하여, 유 무선 네트워크를 이용하여 원격 감시제어장치를 제작하였다. 이 장치는 한기대 캠퍼스 내에 설치되어 있는 50KW급 태양광전원을 대상으로 1km 정도 떨어져 있는 그린에너지연구실에서 유무선 네트워크를 이용하여 실시간으로 출력되는 전압, 전류데이터를 무선네트워크로 장거리 전송하여, HMI 프로그램인 AutoBase로 실시간 모니터링 하도록 제작하였다. 앞으로 본 논문에서 제안한 원거리 감시제어 장치를 이용하여 원거리에 위치한 대규모 태양광발전단지의 데이터를 무선네트워크 기술로 전송받아 보구슈지를 수행할 수 있는 기반을 마련하였다.