• Title/Summary/Keyword: 풀방식

Search Result 268, Processing Time 0.025 seconds

A Design for Solid-State Radar SSPA with Sequential Bias Circuits (순차바이어스를 이용한 반도체 레이더용 SSPA 설계)

  • Koo, Ryung-Seo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.11
    • /
    • pp.2479-2485
    • /
    • 2013
  • In this paper, we present a design for solid-state radar SSPA with sequential bias. We apply to variable extension pulse generator to eliminate signal distortion which is caused by bias rising/falling delay of power amplifier. There is an optimum impedance matching circuit to have high efficiency of GaN-power device by measuring microwave characteristics through load-pull method. The designed SSPA is consisted of pre-amplifier, drive-amplifier and main-amplifier as a three stages to apply for X-Band solid-state radar. Thereby we made a 200W SSPA which has output pulse maximum power shows 53.67dBm and its average power is 52.85dBm. The optimum design of transceiver module for solid-state pulse compression radar which is presented in this dissertation, it can be available to miniaturize and to improve the radar performances through additional research for digital radar from now on.

Development of Spatial Information System for Regional Ground Stability Assessment near Dam area (댐 주변지역 광역적 지반 안정성 평가를 위한 공간 정보시스템 개발)

  • 장범수;이사호;최위찬;최재원;오영철
    • Spatial Information Research
    • /
    • v.9 no.1
    • /
    • pp.125-135
    • /
    • 2001
  • Ground failure such as landslide, rock fall land subsidence by heavy rainfall have damaged to people and property. Especially, the damage to important facility such as dam, bridge, tunnel and industrial complex may be possible. Therefore the ground failure must be assessed and counter plan must be prepared. So, the object of this study is to develop the spatial information system for regional ground stability assessment. For this, the topographic, geologic, soil, forest, land use, rainfall frequency map, and satellite image near 40 dams were collected and constructed to the spatial information system. The spatial information system was developed using Avenue in ArcView 3.2 environment and consists of pull down menus and icons. For application of the spatial information system, regional ground stability was assessed in Andong dam. The assessment was ground failure susceptibility and possibility. The spatial information can be used for regional ground stability assessment, prevention and mitigation of hazard, and management of ground as basic data.

  • PDF

Comparative Study in Algebra Education with CAS: Korea and US cases (컴퓨터 대수체계(CAS) 대비 중등대수교육 기초 연구)

  • Chang, Kyung-Yoon
    • School Mathematics
    • /
    • v.10 no.2
    • /
    • pp.297-317
    • /
    • 2008
  • This study was designed to gain insight to adopt CAS into secondary level algebra education in Korea. Most inactive usage of calculators in math and most negative effects of calculators on their achievements of Korean students were shown in International studies such as TIMSS-R. A comparative study was carried out with consideration of mathematical backgrounds and technological environments. 8 Korean students and 26 US students in Grade 11 were participated in this study. Subjects' Problem solving process and their strategies of CAS usage in classical Box-problem with CAS were analyzed. CAS helped modeling by providing symbolic manipulation commands and graphs with students' mathematical knowledge. Results indicates that CAS requires shifts focus in algebraic contents: recognition of decimal & algebraic presentations of numbers; linking various presentations, etc. The extent of instrumentation effects on the selection of problem solving strategies among Korea and US students. Instrumentation

  • PDF

Development of Railroad Rockfall and Landslide Information System using GIS (GIS를 이용한 철도 연변 낙석, 산사태 정보시스템 개발)

  • 이사로;송원경;박종휘
    • Tunnel and Underground Space
    • /
    • v.11 no.1
    • /
    • pp.64-71
    • /
    • 2001
  • The purpose of this study is to develop rail rockfall and landslide information system to manage spatial database using GIS. For this, a spatial database containing information such as railroad, map, topographic analysis, meteorological data, and rockfall has been constructed for 2.5 km or 5 km buffer zone from the Kyungchun, Youngdong, Jungang, Taebak and Jungsun Rairoad where risk of landslide occurrence potential is high. For management of the spatial database, railroad rockfall and landslide information system has been developed. The information system consists of view, table, chart, layout and project environment. The functions provided in the system are data conversion, editing, labeling, zoom in and out, map making, graphic editing, text DB management, charting, on-line help as well as input, retrieve and output of spatial database. The system was developed using ArcView script language Avenue, and consisted of pull-down menus and icons for easy use. The spatial database and the information system can be used to rockfall and landslide management and analysis near the railroad as basic data and tool.

  • PDF

A Study on Home's Emergency Monitoring System Using Embedded System (임베디드 시스템을 이용한 가택의 긴급상황 감시 시스템에 대한 연구)

  • 최재우;양승현;노방현;황희융
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.5 no.1
    • /
    • pp.60-64
    • /
    • 2004
  • In this paper, we implemented a real-time remote home monitoring system which we have ported the Linux OS and HTTP(Hypertext Transfer Protocol) web server. The GoAhead web server was ported using by ARM cross compiler. And then we used the analog to digital converter ADC0809 for sensing the vii able input signal at widely separated home. We have implemented linux device driver for ADC(Analog to Digital Convertor) and CGI-C(Common Gateway Interface - C language) application program using Client pull method for monitoring real-time changing data. The factor of monitoring is temperature, intensity of illumination and gas's existence. And this system has ability which check the status of out door and gas valve. We have designed the embedded web server system for home emergency monitoring in low cost.

  • PDF

The Flora of Vascular Plants around Tuman River in China (두만강 접경지역 일대의 관속식물상)

  • 안영희;김봉찬;강기호;조동광;이철호
    • Korean Journal of Environment and Ecology
    • /
    • v.17 no.3
    • /
    • pp.187-200
    • /
    • 2003
  • This study was conducted by China along with the Tumen River, which cuts between of North Korea and China. As a result 92 family, 287 genera, 470 species, 57 variety 4 formas, total 531 taxa of vascular plants were identified. The surveyed area was include the region that had various vegetation such as upper swampy land, seashore dune, a river, a high mountain grassy plain, deciduous tree zone and evergreen coniferous forest zone. The specfic plants which is protected by The Natural Environmental Preseration Act appeared to 6 taxa, and rare and endangered plants conserved by Forestry Administration were found 21 taxa in these areas. Among them Lilium cernum, Jeffersonia dubia, Acanthopanax senticosus could be regarded as very important one for chinese medicine. Picea koraiensis, Larix gmelini var. principis-ruprechtii, Populus koreana, Betula fusenensis, Ulmus pumila, Ledum palustre var. diversipilosum, Rhododendron parvifolium, Vaccinium uliginosum, Astragalus membranaceus, Aquilegia flabellata var. pumila, Carex gotoi, Carex capricornis etc. are not distributed in the South Korea.

Optimized Spectrum Pooling by Inventory Model (인벤토리모델을 이용한 스펙트럼풀링 최적화)

  • Byun, Sang-Seon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.11
    • /
    • pp.2664-2669
    • /
    • 2014
  • Recently, many research efforts have paid attention to spectrum pooling meshanism that provides efficient way to manage transient spectrum requests of secondary users in cognitive radio networks. Spectrum pooling is maintained by WSP (wireless service provider). WSP leases the spectrums stored in her spectrum pool to secondary users with being paid for it. It is natural that WSP tries to get profits as much as possible, which implies the WSP tries to minimize the cost required for maintaining her spectrum pool. In this paper, we model the spectrum pool into a probabilistic inventory model. Assuming secondary users' spectrum requests follow normal distribution, we give a strategic way that minimizes the maintenance cost of the spectrum pool. By a series of simulations, we show that WSP can reduce the total maintenance cost through our inventory model-based spectrum pooling than maintaining fixed inventory level.

A Simple Stereo Matching Algorithm using PBIL and its Alternative (PBIL을 이용한 소형 스테레오 정합 및 대안 알고리즘)

  • Han Kyu-Phil
    • The KIPS Transactions:PartB
    • /
    • v.12B no.4 s.100
    • /
    • pp.429-436
    • /
    • 2005
  • A simple stereo matching algorithm using population-based incremental learning(PBIL) is proposed in this paper to decrease the general problem of genetic algorithms, such as memory consumption and inefficiency of search. PBIL is a variation of genetic algorithms using stochastic search and competitive teaming based on a probability vector. The structure of PBIL is simpler than that of other genetic algorithm families, such as serial and parallel ones, due to the use of a probability vector. The PBIL strategy is simplified and adapted for stereo matching circumstances. Thus, gene pool, chromosome crossover, and gene mutation we removed, while the evolution rule, that fitter chromosomes should have higher survival probabilities, is preserved. As a result, memory space is decreased, matching rules are simplified and computation cost is reduced. In addition, a scheme controlling the distance of neighbors for disparity smoothness is inserted to obtain a wide-area consistency of disparities, like a result of coarse-to-fine matchers. Because of this scheme, the proposed algorithm can produce a stable disparity map with a small fixed-size window. Finally, an alterative version of the proposed algorithm without using probability vector is also presented for simpler set-ups.

A study on the digital carrier recovery loop with adaptive loop bandwidth (적응 루프 대역폭을 가진 디지털 반송파 동기 루프에 관한 연구)

  • 한동석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.22 no.8
    • /
    • pp.1774-1781
    • /
    • 1997
  • In this paper, we propose a full digital frequency and phase locked loop for CATV and HDTV receivers adopting VSB modulation. The CATV and HDTV receivers proposed by the Grand-Alliance in USA are ultilizing analog signal processing technology for carrier recovery. By the way, it is not a good architecture for the development of single chip ASIC operating in digital domain. To solve this problem while improving the performance, we first down convert the received r.f. signal to a near baseband signal for a low-rate AD converter and then we use digital signal processing techniques. The proposed system has the frequency pull-in range of -200 KHz +2.50 KHz. Moreover, it has the ability of adaptive loop bandwidth control according to the amount of frequency offset to improve the acquisition time while reducing the phase noise.

  • PDF

The Development of Buck Type Electronic Ballast for 250W MHL and Dimming System (250W MHL용 Buck Type 전자식 안정기 및 Dimming 시스템 개발)

  • 박종연;박영길;정동열;김한수
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.7 no.1
    • /
    • pp.30-40
    • /
    • 2002
  • This paper studies the electronic ballast development for 250w MH lamps. We have improved the input power factor using a PFC IC. To provide the rating voltage required In the lamps, we have used the buck type dc-dc converter By this method, the stress of switching devices in inverter can be reduced. The inverter is the Full-Bridge type. To eliminate the acoustic resonance phenomena of MH lamps, we have added the high frequency sinewave voltage to the low frequency square-wave voltage to the lamp. We hove developed the igniter circuit using the L, C devices. We could control dimming of the lamp by varying the output voltage of the buck converter. The time of illuminating lamps and luminous intensity could be adjusted by season and time band. The buck converter output voltage can be controlled and the no load and over current situation were Protected by the development of the microprocessor Program.