• Journal of Korea Water Resources Association
• /
• v.55 no.5
• /
• pp.321-331
• /
• 2022

In this study, we tried to present a method for calculating the amount of regression using a watershed modeling method that can simulate the hydrological mechanism of water balance analysis and agricultural water based on watershed unit. Using the soil water assessment tool (SWAT), a watershed water balance analysis was conducted considering the simulation of paddy fields for the Manbongcheon Standard Basin (97.34 km²), which is a representative agricultural area of the Yeongsan river basin. Before evaluating return flow, the SWAT was calibrated and validated using the daily streamflow observation data at Naju streamflow gauge station (NJ). The coefficient of determination (R²), Nash-Sutcliffe Efficiency (NSE), Root-Mean-Square Error (RMSE) of NJ were 0.73, 0.70, 0.64 mm/day. Based on the calibration results for three years (2015-2017), the quick return flow and the return rate compared to the water supply amount for the irrigation period (April 1 to September 30) were calculated, and the average return flow rate was 53.4%. The proposed method of this study may be used as foundation data to optimal agricultural water supply plan for rational watershed management.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.510-514
• /
• 2022

In this paper, we propose the development of high-sensitivity low-end radiation measuring sensor module. The proposed measurement sensor module is a scintillator + photomultiplier(SiPM) sensor optimization structure design, amplification and filter and control circuit design for sensor driver, control circuit design including short-distance communication, sensor mechanism design and manufacturing, and GUI development applied to prototypes consists of, etc. The scintillator + photomultiplier(SiPM) sensor optimization structure design is designed by checking the characteristics of the scintillator and the photomultiplier (SiPM) for the sensor structure design. Amplification, filter and control circuit design for sensor driver is designed to process fine scintillation signal generated by radiation with a scintillator using SiPM. Control circuit design including short-distance communication is designed to enable data transmission through MCU design to support short-range wireless communication function and wired communication support. The sensor mechanism design and manufacture is designed so that the glare generated by wrapping a reflective paper (mirroring) on the outside of the plastic scintillator is reflected to increase the efficiency in order to transmit the fine scintillation signal generated from the plastic scintillator to the photomultiplier(SiPM). The GUI development applied to the prototype expresses the date and time at the top according to each screen and allows the measurement unit and time, seconds, alarm level, communication status, battery capacity, etc. to be expressed. In order to evaluate the performance of the proposed system, the results of experiments conducted by an authorized testing institute showed that the radiation dose measurement range was 30 𝜇Sv/h ~ 10 mSv/h, so the results are the same as the highest level among products sold commercially at domestic and foreign. In addition, it was confirmed that the measurement uncertainty of ±7.4% was measured, and normal operation was performed under the international standard ±15%.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.3
• /
• pp.5-14
• /
• 2023

The dry unit weight of the soil can be obtained by measuring the weight of the oven dried soil. According to the Korean Industrial Standards (KS F), oven dried soil at 110±5℃ continuously increases in weight when exposed to air. However, there is no regulation on the weight measurement time of oven dried soil, making it difficult to accurately measure the dry weight. In this study, a method to easily determine the dry weight was presented through the analysis of the weight singularity that appears during weight measurement. The weight singularity represents the smallest value among the measured weights, and is the weight at which the effect of moisture absorption in the air of the sample is minimized. In the course of the experiment, a container was selected using a statistical analysis method, and a photograph of the soil samples were presented using an optical microscope. In addition, the temperature of the weight singularity was measured using a non-contact infrared thermometer. As a result of analyzing the weight singularity of six types of soil, including Jumunjin sand, Naeseong stream sand, Yecheon weathered granite soil, Jeju sand, Sabkha sand, and Ulleung sand, the weight singularity of oven dried sample appeared between 8 and 27 seconds after weight measurement, and the temperature ranged from 103.4 to 108.13℃. The weight decrease rate of the singularity was 0.0066 to 0.0085% depending on the soil samples.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.47-63
• /
• 2023

The Seoul Metropolitan Government is building and operating digital twin-based urban spatial information to solve various problems in the city and provide public services. Two essential factors to ensure the stable utilization of spatial information for the implementation of such a digital twin city are the latest and quality of the data. However, it is time-consuming and costly to maintain continuous updating of high-quality urban spatial information. To overcome this problem, we studied efficient urban spatial information construction technology and the operation, management, and update procedures of construction data. First, we demonstrated and applied automatic 3D building construction technology centered on point clouds using the latest hybrid sensors, confirmed that it is possible to automatically construct high-quality building models using high-density airborne lidar results, and established an efficient data management plan. By applying differentiated production methods by region, supporting detection of urban change areas through Seoul spatial feature identifiers, and producing international standard data by level, we strengthened the utilization of urban spatial information. We believe that this study can serve as a good precedent for local governments and related organizations that are considering activating urban spatial information based on digital twins, and we expect that discussions on the construction and management of spatial information as infrastructure information for city-level digital twin implementation will continue.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.408-416
• /
• 2023

The IUCN Red List of Ecosystems serves as a global standard for assessing and identifying ecosystems at high risk of biodiversity loss, providing scientific evidence necessary for effective ecosystem management and conservation policy formulation. The IUCN Red List of Ecosystems has been designated as a key indicator (A.1) for Goal A of the Kunming-Montreal Global Biodiversity Framework. The assessment of the Red List of Ecosystems discerns signs of ecosystem collapse through specific criteria: reduction in distribution (Criterion A), restricted distribution (Criterion B), environmental degradation (Criterion C), changes in biological interaction (Criterion D), and quantitative estimation of the risk of ecosystem collapse (Criterion E). Since 2014, the IUCN Red List of Ecosystems has been evaluated in over 110 countries, with more than 80% of the assessments conducted in terrestrial and inland water ecosystems, among which tropical and subtropical forests are distributed ecosystems under threat. The assessment criteria are concentrated on spatial signs (Criteria A and B), accounting for 68.8%. There are three main considerations for applying the Red List of Ecosystems assessment domestically: First, it is necessary to compile applicable terrestrial ecosystem types within the country. Second, it must be determined whether the spatial sign assessment among the Red List of Ecosystems categories can be applied to the various small-scale ecosystems found domestically. Lastly, the collection of usable time series data (50 years) for assessment must be considered. Based on these considerations, applying the IUCN Red List of Ecosystems assessment domestically would enable an accurate understanding of the current state of the country's unique ecosystem types, contributing to global efforts in ecosystem conservation and restoration.

• Journal of Life Science
• /
• v.33 no.11
• /
• pp.944-949
• /
• 2023

The purpose of this study was to identify conserved metabolic pathways and conserved genes in 122 archaeal species. Using the Clusters of Orthologous Groups of Proteins (COG) database of conserved genes, we analyzed whether 122 species had 63 COG metabolic pathways, the 822 COGs that compose them, and a total of 4,877 COGs. Archaeal ribosomal proteins were the most conserved in metabolic pathways. 46 COGs in seven COG pathways among 63 COG pathways and 20 COGs in others were conserved in 122 species. Some genes involved in cell wall and extracellular matrix synthesis, replication, transcription, translation, and protein metabolism were common to all 122 species. When the distance value of the phylogenetic tree was analyzed at the phylum level or class level, the average was the lowest at the class Halobacteria of the phylum Euryarchaeota. Standard deviation was high for the class Nitosospharia of the phylum Thaumarchaeota, the unclassified members of phylum Thaumarchaeota, the class Halobacteria of the phylum Euryarchaeota, the class Thermoprotei of the phylum Crenarchaeota, and other archaea. Furthermore, the phylogenetic tree analysis revealed six commonalities. The results of this study, along with data on conserved genes, could be used for drug development and gene selection for strain improvement.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.383-391
• /
• 2007

This study was conducted for an assessment through the estimation of soil loss by each catchment classified by soil catena. Ten catchments, which are Geumgang21, Namgang03, Dongjincheon, Gapyongcheon01, Gyongancheon02, Geumgang16, Byongsungcheon01, Daesincheon, Bukcheon02, Youngsangang08, were selected from the hydrologic unit map and the detailed soil digital map (1:25,000) for this study. The catchments like Geumgang21, Namgang03, Dongjincheon, Gapyongcheon01 and Gyongancheon02 were mainly composed with soils originated from gneiss. The catchments like Geumgang16, Byongsungcheon01, Daesincheon, Bukcheon02 and Youngsangang08 were mainly composed with soils originated from granites. The grades, which are divided into seven grades with A(very tolerable), B(tolerable), C(moderate), D(low), E(high), F(severe), G(very severe), of soil erosion estimated by USLE in catchments were distributed in most A and B because of paddy land and forestry. In detailed, the soil erosion grade of catchments mainly distributing soils originated from gneiss showed more the distribution of B and C than it of catchments mainly distributing soils originated from granites. The reason of results would be derived from topographic characteristics of soils originated from gneiss located at mountainous. The soil loss according to soil catena linked with Songsan and Jigok series, which are soils originated from gneiss was calculated with $7.66ton\;ha^{-1}\;yr^{-1}$. The soil loss of Geumgang16, Byongsungcheon01, Daesincheon, Bukcheon02 which have the soil catena linked with Samgak and Sangju soil series originated from granite, was calculated with $5.55ton\;ha^{-1}\;yr^{-1}$. The soil loss of Youngsangang08 which have the soil catena linked with Songjung and Baeksan soil series originated from granite was calculated with $9.6ton\;ha^{-1}\;yr^{-1}$, but the conclusion on soil loss in this kind of soil catena would be drawn from the analysis of more catchments. In conclusion, the results of this study inform that the classification of soil catena by catchments and estimation of soil loss according to soil catena would be effective for analysis on the grade of non-point pollution by soil erosion in a catchment.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.90-102
• /
• 1986

This study was performed to obtain the basic data which can be applied to the use of concretes. The data was based on the properties of concrectes depending upon water-cement ratios and addings to compare those of plain concrete. The results obtained were summarized as follows; 1. In case the proper quantity of water reducing agent was added, unit weight of water is decreased to 12.9% with WR-LG of water reducing set standarding agent and to 8.6% with HF-SP of high fluid agent and to 17.2% with AH-WR of water reducing set accelerating agent, respectively, as compared with plain concrete. With the increase of water reducing agent content unit weight of water was greatly decreased. 2. The adding rate of water reducing agent which produce maximum strength was 0.2% with WR-LG and 0.4% with HF-SP and AH-WR, respectively. The increasing rates of strengths were showed that WR-LG is 24.1% and that HF-SP is 41.8% and that AH-WR is 43.3%, respectively, as compared with plain concrete. 3. The correlations between compressive and tensile strength were highly significant as a straight line. the multiple regression equations of compressive and tensile strength were computed with the variables of curing age and addition of water reducing agent. They were highly significant. 4. In case the proper quantity of water reducing agent was added, the correlations between water-cement ratio and compressive strength were highly significant as a straight line. The increasing rates of strength were showed higher than the decreasing rates of water cement-ratio.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.269-276
• /
• 2010

Total mercury and methylmercury concentrations were determined in 15 commonly consumed aquatic food species using total mercury analyzer and gas chromatography with electron capture detector. The mean total mercury and methylmercury concentrations (mg/kg) were 0.088 and 0.034 in mackerel, 0.061 and 0.016 in hair tail, 0.030 and 0.005 in yellow croaker, 0.032 and 0.008 in Alaska pollock, 0.059 and 0.023 in eastern catfish, 0.110 and 0.045 in snakehead, 0.030 and 0.011 in Japanese common squid, 0.026 and 0.009 in common octopus, 0.035 and 0.008 in swimming crab, 0.009 and not detected (ND) in oyster, 0.011 and ND in shortneck clam, 0.008 and ND in mussel, 0.018 and ND in sea mustard, 0.007 and ND in nori, and 0.019 and ND in sea tangle, respectively. The total weekly dietary intakes of total mercury and methylmercury were estimated, respectively, using food consumption data from diet surveys and the concentrations of total mercury and methylmercury from this study. They were $0.178\;{\mu}g/kg$ body weight (b.w.)/week (3.57% of provisional tolerable weekly intake (PTWI)) and $0.052\;{\mu}g/kg$ b.w./week (3.34% of PTWI) respectively, and all were within their respective PTWI set by the Joint FAO/WHO Expert Committee on Food Additives (JECFA). Therefore, considering that the main contributor to mercury intake in the diet is aquatic foods and that the 15 aquatic food species examined in this study are highly consumed, it is concluded that the mercury levels in the foods measured in this study do not present a concern for consumer health.