• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.533-545
• /
• 2003

This study analyzed several storm events observed in the Seolma-chun basin to derive the characteristic velocity of GIUH (Geomophological Instantaneous Unit Hydrograph) as well as its variability. Especially, this study focused on the variation of characteristic velocity due to the change of rainfall characteristics. The IUH of the Seolma-chun basin was derived using the HEC-1, whose peak discharge and time were then compared with those of the GIUH to derive the characteristic velocities. The characteristics velocities were analyzed by comparing with the GcIUH (Geomorphoclimatic IUH) as well as the characteristics of rainfall. Results are summarized as follows. (1) The characteristic velocity of GIUH was estimated higher with higher variability than the GcIUH, but their trends were found similar (2) Total amount of effective rainfall (or, mean effective rainfall) well explains the characteristic velocity of GIUH. This could be assured by the regression analysis, whose coefficient of determination was estimated about 0.6. (3) The duration and the maximum intensity of rainfall were found not to affect significantly on the characteristic velocity of GIUH. The coefficients of determination were estimated less than 0.3 for all cases considered. (4) For the rainfall events used in this study, the characteristic velocities of GIUH were found to follow the Gaussian distribution with its mean and the standard deviation 0.402 m/s and 0.173 m/s, respectively. Most of the values are within the range of 0.4∼0.5 m/s, and its coefficient of variation was estimated to be 0.43, much less than that of the runoff itself (about 1.0).

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.67-75
• /
• 2009

While the trend of all industries recently lies in combination, construction industry is much interested in enhancing efficiency and competitiveness in the aspect of site control by adopting RFID. Though RFID has been applied to diverse areas thus far, it cannot be easily applied to construction industry due to diverse physical, chemical and use-environmental properties of construction materials. Furthermore, it is rarely applied to the site because of many problems in its application. It is required to prepare RFID code issuance and system that can systematically control the code as well as to research the standardization of frequency, specification, protocol, package method, recognition method, etc in order to apply RFID to construction industry. In this research, RFID code issuance and management program are proposed as a part of program research to apply RFID. Furthermore, the restricted matters of existing RFID tag are drawn to produce pilot product of RFID tag that can solve it so as to perform site application test. According to the experiment, effective recognition distance varies depending on material/environmental property and control efficiency changes depending on attachment method and application method. Thus, preparing diverse restrictive factors and solutions by systematically analyzing control method(medium, process) of current architecture materials and applying it to construction site can be the way to successfully apply RFID.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.53-64
• /
• 2013

In building construction project, there are numerous information or data parts across many different software applications and professional specialists. BIM (Building Information Modeling), as a medium for managing information generated during construction project, it is intended to enhance the effectiveness of construction management and reap a lot of advantages such as, automatic quantity takeoff, error-free estimation, 4D(3D+Time), 5D(4D+Cost) simulation. Nevertheless, the overall and practical effectiveness of BIM utilization is difficult to justify at this stage. While helpful, there are some limitation when BIM applied to construction management due to the differences of data processing process between BIM and work in the field, limitations of information generated from BIM object and interoperability problem among BIM application. Therefore, this paper propose a framework integrating BIM with cost-schedule information using IFC. And we construct the system prototype based on the framework and performed case study to examine the framework. The proposed framework provides the information basis for BIM based cost-schedule integration. ultimately, the framework increase the utilization of BIM and work efficiency of construction industry by supporting an understanding of information.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.11
• /
• pp.23-30
• /
• 2018

According to recent ground collapse occurrence, ground subsidence is increasing every year in downtown area, which is a social problem. The purpose of this study is to investigate the relationship between ground water level lowering and ground collapse through laboratory model experiments. After mixing 1:1 granite weathered soil with sand, sandy soil was formed as a relative density of 30%, 50%, and 80%. And then the changes of soil discharge with change of groundwater level were compared. The physical property of material of which particle distribution were well graded with maximu dry unit weight of $1.94kg/cm^3$ and internal friction angle of 37degrees. Ground water levels were measured at 10 cm, 20 cm, and 30 cm from the bottom. As a result, the experiment shows that the higher the groundwater level works the higher the discharge velocity and the magnitude of underground cavity also increases with elapsed time. Finally, the cumulative quantity of soil discharge occurred up to 30 kg at the elapsed time, 35 minutes. It was also confirmed that the range of ground collapse increased due to soil discharge with ground water level lowering.

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.509-524
• /
• 1998

정보시스템 개발노력의 상당수는 실패로 끝나고 있다. 최근 통계에 따르면 정보시스템 개발 프로젝트의 반은 실패로 끝난다고 한다［kaplan, 1998］. 이와 같은 높은 실패율은 시스템 개발을 위한 노력을 체계적으로 투입하지 못하고 개발 프로젝트를 관리하기 위한 노력을 단위프로젝트 차원에서만 집중시키는데서 연유한다고 생각된다. 다시 말해 장기적인 관점에서 개발조직의 역량 향상이라는 보다 근본적인 목표를 간과하고 있는 것이다. 이러한 점에 착안하여 소프트웨어 엔지니어링 분야에서는 정보시스템 개발과 관련'한 개발 조직의 능력을 향상시키기 위한 다양한 접근방법이 제시되고 있다. 개발조직의 개발 프로세스 성숙도를 진단하기 위한 측정도구로 개발된 카네기멜론대학의 CMM(Capability Maturity Model)과 ISO 에서 정의한 표준인 SPICE (Software Process Improvement and Capability dEtermination) 모델이 그 대표적인 예에 속한다. 그러나 이와 같은 모델들은 개발조직의 프로세스 개선을 위한 방향과 요건은 제시하고 있지만, 이를 조직 내에서 구현하기 위한 구체적인 방법이나 수단은 제시해주지 못하고 있다. 따라서 이러한 접근방법 역시 소프트웨어 엔지니어링 역량 이나 개발경험이 일천한 우리 현실에서는 부분적인 성과 이상을 기대하기는 어려웠다. 본 연구에서는 이와 같은 문제점이 개발 프로젝트와 관련된 경험이나 지식을 효과적으로 추출하고, 획득하고, 체계화하고, 시스템화하여 조직 내에서 활용하려는 노력이 부족한기 때문이라고 본다. 이에 본 연구에서는 개발조직의 역량 향상을 위한 지식관리적 접근 방법의 세가지 유형을 제시하기로 한다.>$Ca^{2＋}$ 는 뿌리에서, $Mg^{2＋}$ 는 잎에서 많았으며, $PO_4$$^{-}$ 는 과실과 줄기에서 많았다. 배지간에 따른 차이는 나타나지 않았으며, $K^{+}$, $Ca^{2＋}$ 및 $Mg^{2＋}$ 는10:0에서, $PO_4$$^{-}$ 는 8:2에서 각각 많았다.해 제품을 판매하였으며, 기업 및 제품이미지 제고를 위한 고객에 대한 서비스도 강화하고 있었다. 통신기기업체내지 소프트웨어 산업으로의 진출이 가능할 수 있도록 상호진출을 허용할 필요가 있다고 본다. 이를 위해서 우리 나라 정부 역시 미국처럼 새로운 통신개혁법을 만들 필요가 있다. 새로운 통신개혁법의 핵심적인 사항으로서 첫째, 통신과 CATV간의 상호진입을 허용, 둘째, 통신사업자가 통신관련 기기산업에 참여할 수 있는 규제완화를 허용, 셋째, 유아단계에 있는 소프트웨어 및 컨테트산업을 육성하는데 산업육성책 수립 등을 적극적으로 추진하여야 할 것이다. 그리고 현재 국내 재벌기업들로 구성되어 있는 기반산업을 지원하는 기술개발 지원체제와 육성정책을 소프트웨어 및 컨텐트의 응용산업으로 개편할 필요성도 제시되며, 이를 위해 범부처 차원에서 소프트웨어 및 컨텐트 육성정책을 지원하는 종합적인 대책을 마련해야 한다고 본다.서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이 발견되었다. 이유로서는 가압하에서 용융탄산엽의 증가된 산화력으로 보다 치밀한 내식성 산화물 피막이 형성되기 때문으로 생각되고 있다. 또

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.736-738
• /
• 2001

웹을 사용하는 사용자들의 급속도로 증가하는 서비스 요청을 신속하고 저렴한 비용으로 처리하기 위한 대응책으로, LAN 환경의 웹 서버 클러스터 구조가 각광을 받고 있다. 높은 가용성 및 확장성을 보장하는 웹 서비스를 제공하기 위해 많은 부하의 서비스 요구를 여러 서버에게 효과적으로 나누어 처리할 수 있어야 하며, 따라서 서비스 요청 패킷을 고르게 분배할 수 있는 합리적인 스케줄링 기법을 필요로 한다. ONE-IP 스케줄링 기법은 이더넷의 브로드케스트 메시지에 의해 스케줄링이 분산되도록 하는 전략을 사용함으로써, 클러스터에 유입되는 패킷의 집중화로 인해 발생할 수 있는 병목 현상(bottleneck)과 치명적인 오류(Single-point of Failure) 문제를 효과적으로 해결하였다. 그러나, 서비스를 요청하는 패킷의 발신지 주소만을 이용하는 단순한 패킷 스케줄링을 사용하기 때문에 클러스터를 구성하는 서버들 간의 부하 불균형을 가중시키며, 결과적으로 클러스터의 효율성을 저하시키는 문제점을 가지고 있다. 본 논문에서는 이러한 문제점을 해결하기 위하여 RR ONE-IP 기법을 제안하였다. 제안한 기법은 서버에 할당되는 부하간에 불균형이 발생하는 문제점을 해결하기 위해 TCP 연결 단위의 스케줄링 전략을 사용하였으며, 서버의 부하 정보를 이용하지 않는 RR 스케줄링 기법을 도입함으로써, ONE-IP 기법의 장점을 그대로 유지하면서 보다 나은 부하의 균등한 분배로 시스템의 처리 능력을 향상시키도록 하였다. 또한, 실험을 수행한 결과 제안한 기법이 기존의 기법에 비해 평균 3.84%의 시스템의 성능 향상을 보였으며, 과부하 발생율에서는 평균 23.5%의 감소를 가져왔음을 보였다.우 단어 인식률이 43.21%인 반면 표제어간 음운변화 현상을 반영한 1-Best 사전의 경우 48.99%, Multi 사전의 경우 50.19%로 인식률이 5~6%정도 향상되었음을 볼 수 있었고, 수작업에 의한 표준발음사전의 단어 인식률 45.90% 보다도 약 3~4% 좋은 성능을 보였다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)

• Environmental and Resource Economics Review
• /
• v.27 no.3
• /
• pp.495-520
• /
• 2018

Because of structural changes in the international oil market and the economy, it is widely recognized that the impact of oil shocks on the economy has weaken since the mid-1980s. This study tries to examine the validity of the recent perception about the relationship between oils shocks and the economy, estimating the time-varying effects of oil shocks on the Korean economy. The results show that the dynamic effects of oil shocks normalized to a one standard deviation has been relatively constant, in contrast to the recent perception and a number of existing studies. In addition, because the shape of impulse response functions at each point in time spanning from 1984:II to 2017:IV has not been changed significantly, it seems that the propagation mechanism of oil shocks also has not been substantially altered. These findings indicate that even though structural changes of the economy, such as the reduction in the share of oil consumption and the spread of high-efficiency energy technologies, have been rapidly progressed, it is not still enough to offset the negative effects of oil shocks. Rather, it seems that the recent perception about the shrinking effects of oil shocks is mainly due to the assumptions that do not reflect changes in the size of oil shocks. In particular, this problem appears more pronounced in the case of the typical a one standard deviation increase oil shock under homoskedasticity assumption, which is widely adopted in the most VAR analyses. Therefore, in estimating the effects of oil shocks on the economy, it is important to specify the correct model and normalization method, to reflect changes in the size of oil shocks.

• Archives of design research
• /
• v.17 no.3
• /
• pp.27-38
• /
• 2004

It is important for designers to be supported with their decision-making on colours which is often based on personal distinction rather than logical dialogue that may lead to confusion within communicating with others. To help these problems and to gain productivity, we would like to propose a way to define colour grouping method. In other words, the purpose of this study is to help to improve the communication and productivity within the design and designers. The grouping was based and inspired by from the studies of Kobayashi, Hideaki Chijiawa, Allis Westgate and Martha Gill. The study of grouping is based on the "tones" of each group, as they seem to reflect a designer s sentimentalism of chosen colours the best. Each of these groups will be named Bright , Pastel ,Deep and Neutral The general concept of each groups are: - Bright: high quality of pixels of primary colour - Pastel: primary colour with white - - Deep: Primary colour with gray or black - Neutral: colours that does not include any of above Each of the colour group has been allocated into Si-Hwa Jung's colour charts and colour prism to visualize the relationships between the colour groups. These four groups and the colours included in them will be broken down to smaller groups in order to make colour palette. This would break the barrier and result in using colours in groups as well as crossover coordination. This study would result in new ways of using colurs for designers designers

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.391-401
• /
• 2004

In this paper, we introduce a novel coding method to efficiently enable spatial random access for high resolution video. In terms of resolution and display size, standard display devices (such as cathode-ray tubes. monitors. PDAs, and LCDs) do not sufficiently support high resolution video such as digital cinema and panoramic video. Currently, users have no choice but to view video at lower resolution as a result of down-sampling, or only a partial region of the video due to display size limitations. Our proposed method. which we call the B-map, represents the set of starting locations of the coded segments in a picture frame. This information, or B-map, is first sent to the decoder prior to the coded data stream of the frame and is then used for fast local decoding. To test our method, we compare our B-map with JPEG tiling and the JPEG Resynchronization marker. Experimental results show that the proposed coding method requires less overhead than existing methods during the same decoding time. The results show promise for future panoramic or digital cinema applications.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.42-62
• /
• 2020

The Ministry of Education has been quick to apply National Competency Standars (NCS) to industrial sites and educational·training institutions in order to resolve discrepancies between practical affairs in industrial sites and vocational education, training & requirements. Full implementation of NCS-based curriculum in vocational education of vocational high schools has been mandatory since 2018. This research used a region-stratified sample of 350 from teachers in 'machinery' and 'machine·metal' majors in mechanical departments of vocational high schools to investigate the awareness of practical courses for metal machining among the teachers. The research results are as follows. First, a majority of the respondents indicated the availability of turning process, milling process, computer integrated manufacturing and measuring courses in mechanical departments. Second, capabilities required by the industry are considered most in selecting practical courses and competence units. Third, positive changes with the introduction of practical courses in the school education are students' practical skills improvement and satisfaction of industrial requirements. Fourth, negative changes with the introduction of practical courses in the school education are too difficult learning modules used in practical courses for students and students' difficulty in learning because of the difference between equipment in schools and industrial equipment in learning modules. Fifth, teachers' satisfaction with practical courses classes and overall conditions is above the average, and their satisfaction with the level of practical courses and bookbinding or purchase of rearranged textbooks of practical courses is below the average. Therefore, application conditions of above-mentioned representative 4 practical courses should be examined and taken care of for consistent improvement to stabilize NCS-based educational courses in mechanical departments.