• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.75-84
• /
• 2000

GIS has been building for various application fields with the aids of NGIS project, especially numerous municipal governments are building a UIS in the level of local governments' informatization. Although there are some difference between municipal governments' business, still many things are in common. So far, individual municipal governments have developed a UIS for their own use, which lead to duplicated development of the UIS. The component technology has been introduced to remove such duplicated efforts and it enabled maximizing the reusablilty of the UIS already developed. This paper proposes a component design for network analysis of the drinking water to calculate the amount of flow and the head loss. This component design provides the initial water amount to estimate the amount of the network flow and the head loss, thereby supports the decision making such as installation or extension of the pipe network. The process of the component design accompanies the business reengineering to support the standardized business work flow. Also, the design of the network analysis component uses the algorithms induced with UML specification. Based on the component design, the component development has been progressing and the network analysis system would be followed. In the near future, another component to integrate the network analysis and the business related to the drinking water needs to be developed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.41-46
• /
• 2011

Reliable information on the surface solar radiation is indispensable for rebuilding food production system in the famine plagued North Korea. However, transfer of the related modeling technology of South Korea is not possible simply because raw data such as solar radiation or sunshine duration are not available. The objective of this study is restoring solar radiation data at 27 synoptic stations in North Korea by using satellite remote sensing data. We derived relationships between MODIS radiation estimates and the observed solar radiation at 18 locations in South Korea. The relationships were used to adjust the MODIS based radiation data and to restore solar radiation data at those pixels corresponding to the 27 North Korean synoptic stations. Inverse distance weighted averaging of the restored solar radiation data resulted in gridded surfaces of monthly solar radiation for 4 decadal periods (1983-1990, 1991-2000 and 2001-2010), respectively. For a direct application of these products, we produced solar irradiance estimates for each sub-grid cell with a 30 m spacing based on a sun-slope geometry. These products are expected to assist planning of the North Korean agriculture and, if combined with the already prepared South Korean data, can be used for climate change impact assessment across the whole Peninsula.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.28-34
• /
• 2011

This study was carried out to estimate monthly mean of daily maximum and minimum temperature across North Korea at a 30 m grid spacing for a climatological normal year (1971-2000) and the 4 decadal averages (1971-1980, 1981-1990, 1991-2000, and 2001-2010). A geospatial climate interpolation method, which has been successfully used to produce the so-called 'High-Definition Digital Climate Maps' (HD-DCM), was used in conjunction with the 27 North Korean and 17 South Korean synoptic data. Correction modules including local effects of cold air drainage, thermal belt, ocean, solar irradiance and urban heat island were applied to adjust the synoptic temperature data in addition to the lapse rate correction. According to the final temperature estimates for a normal year, North Korean winter is expected colder than South Korean winter by $7^{\circ}C$ in average, while the spatial mean summer temperature is lower by $3^{\circ}C$ than that for South Korea. Warming trend in North Korea for the recent 40 years (1971-2010) was most remarkable in spring and fall, showing a 7.4% increase in the land area with 15 or higher daily maximum temperature for April.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.84-92
• /
• 2002

A $32{\times}32$ pixels foveated (linear-polar) structure retina chip with the function of local-light adaptation for edge detection has been designed and fabricated using CMOS technology. Human retina can detect a wide range of light intensity. In this study, we use the biologically-inspired visual signal processing mechanism that consists of photoreceptors, horizontal cells, and bipolar cells in order to implement the function of edge detection in the retina chip. For a local-light adaptive function, the size of receptive field is changed locally according to the input light intensity. The spatial distribution of sensing pixels in the foveated retina chip has the advantages of selective reduction of image data and good resolution in central part to carry out the elaborate image processing with still enough resolution in the outer parts. The designed chip has been fabricated using standard $0.6\;{\mu}m$ double-poly triple-metal CMOS technology and optimized using HSPICE simulator.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06c
• /
• pp.265-267
• /
• 2006

사용목적(Purpose)은 최근 개인 프라이버시 보호와 관련하여 데이타 수집과 수집 후 보안관리에 있어서 중요한 요소로 사용되고 있다. W3C(World Wide Web Consortium)는 데이타 제공자가 자신이 방문한 웹 사이트에 개인정보를 제공하는 것을 통제할 수 있도록 하는 표준을 제시하였다. 그러나 데이타 수집 후 유통과정에서 개인정보에 대한 보안관리에 대한 언급이 없다. 현재 히포크라테스 데이타베이스(Hippocratic Databases), 사용목적기반 접근제어(Purpose Based Access Control)등은 W3C의 데이타 수집 메커니즘을 따르고 있으며, 데이타 수집 후 보안관리에 대하여 사용목적 관리와 접근제어 기법을 사용하여 관리를 하고 있으나 사용목적에 대한 표현과 사용목적 관리의 미흡함으로 인하여 그에 따르는 개인정보의 프라이버시 보호에 있어서 효과적인 해결책을 제시하지 못하고 있다. 본 논문은 사용목적의 표현력을 향상시키면서. 사용목적의 효과적인 관리기법을 제시한다. 또한 개인의 프라이버시 보호를 위한 방법으로 사용목적의 분류화를 통해 최소권한의 원칙을 따르는 접근제어 기법을 제시한다. 본 논문에서는 사용목적을 상속적, 시간적 그리고 독립적 구조로 분류화하였으며, 이렇게 분류화된 사용목적에 대한 각기 다른 관리기법을 제시한다. 또한 접근제어의 유연성을 위해 RBAC의 역할계층 구조를 사용하였으며, 일의 최소 단위인 태스크(task)의 최소권한을 얻기 위한 조건으로 몇몇 특성의 사용목적을 사용하여 만족할 경우 태스크를 처리하기 위한 기존 모델보다 향상된 최소사용권한을 제공하는 기법을 제시한다. Interference Contrast)에 의한 내부구조 관찰이 최종 동정기준이 되어야할 것으로 나타났다.cillus로 구성되었다. 한편, DAL세균군(42균주)은 high G+C 및 low G+C gram positive 계통군 이외에도 proteobacteria -subdivision에 속하는 Afipia와 Ralstonia, proteobacteria -subdivision에 속하는 Variovorax, proteobacteria $\beta$-subdivision에 속하는Pseudomonas로 구성되어 계통학적으로 다양한 세균임이 확인되었다. 40%까지 대체가 가능하였으며, 아울러 높은 라이신 부산물의 대체 수준에 있어서 사료효율과 단백질 전환효율을 고려한다면 아미노산 첨가(라이신과 아르지닌)와 중화 효과에 좋은 결과가 있을 것으로 사료된다.의한 적정 양성수용밀도는 각고 5~6cm 크기의 경우 10~15개체가 적합하였다. 수증별 성장은 15~20 m 수층에서 빨랐으며, 성장촉진과 폐사를 줄이기 위해서는 고수온이 지속되는 7~10월에는 20~30m수층으로 채롱을 내려 양성하고 그 외 시기에는 15 m층 내외가 좋은 것으로 나타났다. 상품으로 출하 가능한 크기 인 각고 10 cm이상, 전중량 140 g 내외로 성장시 키기까지는 채묘후 22개월이 소요되었고, 출하시기는 전중량 증가가 최대에 이르는 3월에서 4월 중순이 경제적일 것으로 판단된다.er 90 % of good relative dynamic modulus of elasticity due to fineness of formation caused by the

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1077-1087
• /
• 2003

In this paper, we proposed an architecture of a cryptosystem with various operating modes for the network security and implemented in hardware using the ASIC library. For configuring a cryptosystem, the standard block ciphers such as AES, SEED and 3DES were included. And the implemented cryptosystem can encrypt and decrypt the data in real time through the wired/wireless network with the minimum latency time (minimum 64 clocks, maximum 256 clocks). It can support CTR mode which is widely used recently as well as the conventional block cipher modes such as ECB, CBC and OFB, and operates in the multi-bit mode (64, 128, 192, and 256 bits). The implemented hardware has the expansion possibility for the other algorithms according to the network security protocol such as IPsec and the included ciphering blocks can be operated simultaneously. The self-ciphering mode and various ciphering mode can be supported by the hardware sharing and the programmable data-path. The global operation is programmed by the serial communication port and the operation is decided by the control signals decoded from the instruction by the host. The designed hardware using VHDL was synthesized with Hynix 0.25$\mu\textrm{m}$ CMOS technology and it used the about 100,000 gates. Also we could assure the stable operation in the timing simulation over 100㎒ using NC-verilog.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.119-130
• /
• 2011

On the point of data quality management, data quality is influenced by quality policy, quality organization, business process, and business rule. Business rules, guide of data manipulation, have effects on data quality directly. In case of building an integration database among distributed databases, defining business rule is more important because data integration needs to consider heterogeneous structure, code, and data standardization. Also data value has various figures depended on data type, unit, and transcription. Finally, database structure and data value problem have to be solved to improve data quality. For handling them, it is needed to draw database integration model and cleanse data in integrated database. NTIS(stands for National science and Technology Information Service) has an aim to serve users who need all information about national R&D by internet, and for that aim, it has a integrated database which has been made with several database sources. We prove that database integration model and data cleansing are needed to build a successful integrated database through NTIS case study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.216-220
• /
• 2002

The microbiological examinations of food service operations were conducted for the hygienic evaluation at four elementary schools in Busan, Korea. Total one hundred and seventy two swabbed samples using sponge were collected from the surface of environments, utensils and equipments of food service facilities and analyzed by measuring the total, coliform and psychrotrophic count. Sampling sites were the surfaces of floors, drains, walls, knives, cutting boards, rubber gloves, vinyl aprons, plastic containers, carriers, shelves, trays, dry shelves, electric tray dryer, food containers, soup containers, rice cookers, frying pans, boiling cookers, refrigerators, dumb waiters and dishwashers. The swabbed samples kept in an ice-parked box were transported to a laboratory and analyzed. The results demonstrated that the degree of contamination depended on the sampling sites. Averages of total counts of surface swab samples were ranged from 0.62 to 7.79 Log CFU/200 cm$^2$. The level of coliforms were ranged from not detectable to 5.26 Log CFU/200 cm$^2$, and those of psychrotrophs from not detectable to 6.15 Log CFU/200 cm$^2$. The severely contaminated sites were dumb waiters, drains, rice cookers, knives, plastic containers and floors. Also cutting boards, rubber gloves, carriers, drying shelves, vinyl aprons, boiling cookers, soup containers, frying pans and refrigerators were highly contaminated with the level of abode 3.5 Log CFU/200 cm$^2$. Therefore, those sites should be focused and controlled according to control points of sanitation standard operating procedures (SSOP). Also, periodic microbiological examination in addition to visual examination is recommended on these highly contaminated sites indicated above results at food service operations in elementary school.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.287-294
• /
• 2003

The purpose of this study was to develop a web-based internet program for nutritional assessment and diet management of patient having hyperlipidemia. Hyperlipidermia were classified by hypercholesterolemia and hypertriglyceridemia. The program consisted of four parts according to their functions and contents. The first part explained the metabolism of lipids and defined the hyperchotesterolemia and hypertriglyceridemia. The second part is to assess the general health status such as body weight, obesity index, basal metabolic rate and total energy requirement by the input of age, sex, height, weight and degree of activity. This part also provides the Patient with menus lists and 1 day menu suitable to his weight, activity and the status of hyperlipidemia and offers the information for food selection, snacks, convenience foods, dine-out, behavioral modification, cooking methods, food exchange lists, and information on energy and nutrients of foods and drinks, and top 20 foods classified by nutrients. The third part is designed to investigate diet history of patient, that is, to find out his inappropriate dietary habit and give him some suggestions for appropriate dietary behavior. This part also offers on-line counseling and frequently asked Questions. The fourth part is evaluating their energy and nutrients intake by comparing with recommended dietary allowance for Koreans or standardized data for patient with hyperlipidemia. In this part, it is also analyzing energy and nutrients of food consumed by food group and meals, and evaluating the status of nutrient intake. These results are finally displayed as tabular forms and graphical forms on the computer screen.