• Korean Journal of Poultry Science
• /
• v.48 no.4
• /
• pp.207-216
• /
• 2021

This study was conducted to determine the nutritional quality of two newly-developed native chicken strains, compared to the commercial Korean native chicken. A total of 600 chickens (CON: Hanhyup No. 3, CL1: candidate line C, CL2: candidate line D) raised under the same conditions were slaughtered at either 5 or 12 weeks. Leg meat was then obtained and analyzed for its physicochemical properties. The results showed that regardless of the growing period, there was no variation in proximate composition (P>0.05), except for crude protein, between strains. Water holding capacity did not differ between strains at either slaughter age; however, it was significantly lower in the 12-week group than in the 5-week group (P≤0.05). For both skin and muscle color, a^* and b^* values were lower at 12 weeks than at 5 weeks (P≤0.05). DPPH radical-scavenging activity tended to be lower at 12 weeks than at 5 weeks (P≤0.05). Furthermore, all chickens slaughtered at 5 weeks were found to have greater contents of linoleic acid (18:2) and polyunsaturated fatty acids (PUFA) and lower atherogenicity and thrombogenicity indices than those slaughtered at 12 weeks (P≤0.05). However, anserine, betaine, and glucose were more concentrated among the lines at 12 weeks than at 5 weeks (P≤0.05). In conclusion, the quality traits of native chickens were distinct by different production stages rather than chicken lines.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.18-27
• /
• 1999

Predicting the deformation behaviors of sheets in thermoforming processes has been a daunting challenge due to the strong nonlinearities arising from very large deformations, mold-polymer contact condition and hyperelasticity constitutive equations. Nonlinear numerical analysis is always required to face this challenge especially for realistic processing conditions. In this study a 3-D algorithm and the membrane approximation are developed for thermoforming processes. The constitutive equation is expressed in terms of the 2nd Piola-Kirchhoff stress tensor and the Cauchy-Green deformation tensor. The 2-term Mooney-Rivlin model is used for the material model equation. The algorithm is established by the finite element formulation employing the total Lagrangian coordinate. The deformation behavior and the stress distribution results of 3-D algorithm with various point boundary conditions are compared to those of the membrane approximation algorithm. Also, the slip boundary condition and the no-slip boundary condition are applied for the systems that have molds. Finally, the effect of sheet temperatures on the final thickness distribution is investigated for the ABS material.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.503-509
• /
• 2011

Specific surface area is becoming a very important factor when newly developed advanced nano-materials are evaluated. But there have been many differences in results when measuring specific surface areas, depending on the measuring equipments and analysis method. To verify the reliability of the specific surface area measurement device supplied within the country, Round Robin Test (RRT) has been done at 21 affiliated research institutes. As a result, it was found that several institute had problems in measuring of gas adsorption amount in measuring equipment, and this proved the need for certified reference material (CRM). Furthermore, it was also found that the results from BET analysis is easily swayed by the analyst's subjectivism, and the calculated results may differ up to 16% in case of CRM I depending on the selection range of BET analysis. So this showed that a standard guideline for BET constant C value and fitting correlation coefficient R is needed, to properly select range in BET analysis. The experience in RRT, distribution of CRM, and standardized procedure would result in improved reliability in industrial processes, and thus, would contribute to the quality management, the productivity improvement, the safety evaluation, and the new material development.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.222-228
• /
• 1997

Toha-jeot, a traditional salt-fermented seafood in Korea, was purchased on the market in order to analyze the flavor compounds. Volatile flavor compounds in unfermented and fermented Toha-jeot were compared by vacuum simultaneous steam distillation-solvent extraction/gas chromatography/mass spectrometry. A total of 104 volatile flavor compounds were detected in both samples. Of these, 66 were positively identified, composed of aldehydes(14), ketones(8), alcohols(30), terpenes(20), sulfur-containing compounds(10), aromatic compounds (6), esters(12) and miscellaneous compounds(8). Levels of several other compounds such as aldehydes, terpenes, sulfur-containing compounds and esters decreased with fermentation time, whereas alcohols, ketone and aromatic compounds increased. Particularly, levels of alcohols in fermented Toha-jeot was 21 times higher than those of unfermented one. Major volatile flavor compounds in both samples were composed of terpenes, sulfur-containing compounds, esters and ethanol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3815-3821
• /
• 2012

The LCD frame is an important part which supports the BLU of medium/large sized TFT-LCD. To produce it efficiently, it is necessary to achieve the molding process improvement from 1 cavity to 2 cavity system. Because 2 cavity mold is compact and its hot-runner zone is broadened, it is difficult to control the temperature on the mold. In this study, injection molding analysis on the frame in 2 cavity process with FEA(Finite Element Analysis) software is carried out to estimate its quality. The calculated injection molding pressures and maximum deflection in 1 and 2 cavity processes are 41.13 MPa and 1.62 mm, 40.49 MPa and 1.66 mm respectively. The measured maximum flexure load and surface roughness of the left and right frame of 2 cavities are 209 N and 0.08 ${\mu}m$, 193 N and 0.10 ${\mu}m$ while those in 1 cavity are 140 N and 0.13 ${\mu}m$. Thermal image shows that the maximum standard deviation of the temperature on left and right side of 2 cavity mold is $1.23^{\circ}C$. The simulation and measurement results show that the quality of the frame in 2 cavity injection molding process as a whole is not worse than that of 1 cavity system. But maximum flexure loads of the frame in 2 cavity process are far greater than that in 1 cavity process.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.290-294
• /
• 2018

Modern warfare exhibit a NCW (Network Centric Warfare) aspect through quick situation awareness and Command and Control. And Tactical messages operate on various tactical data links (TDLs). For monitoring TDL messages processed by data link processor(DLP), message analysers are generally developed as a component during system development. In addition, in order to forward TDL messages processed by DLP to the message anayzer, the interface messages between DLP and message analysers should be defined interface control document(ICD). We propose the methods using UDP or TCP packets provided by TDL layers that are delivered to DLP without communicating directly with DLP. Depending on TDL message standards and Interface Control Documents(ICDs), we design the message analyzer which communicates with data link processor using internal messages. Using known header field information from the TDL application standard such as JREAP-C, we can quickly filter candidate packets against collected packets and use the full data size information contained in the headers to verify the completed message. Because the methods proposed in this paper do not communicate directly with DLP, the methods proposed in this paper are enable to analyze the TDL application messages such as JREAP-C or Link-K without constraints in existing methods that should be reflected in the system configuration and ICD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.419-427
• /
• 2020

This study was undertaken to address the difficulties and inconveniences of an electric wheelchair. We focused on improving usability of initially completed products by augmenting the prototypes designed in the previous study. For evaluation of usability, 10 elderly women aged over 65 years, capable of movements and physical activities in daily life, were enrolled as subjects. The experimental method included a subjective satisfaction questionnaire evaluation of the elderly women using the target product, and the observation evaluation was achieved using video recording data, etc. Usability evaluation revealed that the elevating sector requires improvement of intuition through separation of the elevating control panel and the driving control panel. Improvements in the driving sector include corrections of the front wheel mechanism or driving control algorithm, UI, and sudden stop system. Transferring section assessment revealed a necessity to secure structures and add structures that support power. We believe that based on the inconveniences and improvements presented in the usability evaluation, appending the existing prototype with complementary products will improve the quality of life of elderly women with limited mobility.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.403-409
• /
• 2017

For dry storage of the spent nuclear fuel (SNF) stored in the storage pool of a nuclear power plant, essentially all moisture must be removed to prevent corrosion of the assembly and canister internals and/or degradation of fuel cladding integrity after SNF canister loading operation. R&D work is now in progress on a forced gas drying system that can be used to remove residual water in canisters. In this work, preliminary design is performed to manufacture the forced gas drying system. This process includes a case study of dry methods for canister moisture removal, relative codes and standards, confirmation of adequate dryness, needs analysis at plant sites, and characteristics of SNF stored in pools. Through this preliminary design work, we obtained a conceptual flow diagram and preliminary P&ID of the forced gas drying system. The results of this study can be used to determine details of the design to manufacture the forced gas drying system.

• Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.310-316
• /
• 1999

BBPI contents in domestic soybean and soybean products were investigated by the measurement of chymotrypsin inhibiting activity(C.I.A) and competitive ELISA method. In order to produce polyclonal antibody, BBPI was purified from soybean trypsin-chymotrypsin inhibitor by ion exchange chromatography and electrophoretic gel slicing. Rabbit anti-BBPI polyclonal antibody was produced with the purified BBPI as immunogen. This antibody showed relatively specific binding to BBPI and then used for the establishment of competitive ELISA method to measure BBPI contents in extracts of soybean and soybean products. The standard curve for the measurement of BBPI in soybean extracts was drawn up within the range 0.03 to $30\;{\mu}g/ml$ of BBPI. The C.I.A. and BBPI contents of 12 soybean cultivars were $8,462{\sim}12,428\;U/g$ and $482{\sim}692\;mg%$, respectively. The C.I.A. and BBPI contents were not detected in most of soybean products except soybean sprouts, which contained $10,695{\sim}13,249\;U/g$ of C.I.A. and $529{\sim}803\;mg%$ of BBPI.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.125-140
• /
• 2018

As one of the processes in the manufacturing industry, quality inspection inspects the intermediate products or final products to separate the good-quality goods that meet the quality management standard and the defective goods that do not. The manual inspection of quality in a mass production system may result in low consistency and efficiency. Therefore, the quality inspection of mass-produced products involves automatic checking and classifying by the machines in many processes. Although there are many preceding studies on improving or optimizing the process using the data generated in the production process, there have been many constraints with regard to actual implementation due to the technical limitations of processing a large volume of data in real time. The recent research studies on big data have improved the data processing technology and enabled collecting, processing, and analyzing process data in real time. This paper aims to propose the process and details of applying big data for quality inspection and examine the applicability of the proposed method to the dairy industry. We review the previous studies and propose a big data analysis procedure that is applicable to the manufacturing sector. To assess the feasibility of the proposed method, we applied two methods to one of the quality inspection processes in the dairy industry: convolutional neural network and random forest. We collected, processed, and analyzed the images of caps and straws in real time, and then determined whether the products were defective or not. The result confirmed that there was a drastic increase in classification accuracy compared to the quality inspection performed in the past.