• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.332-337
• /
• 2007

This study was done to determine the adherence rate of Listeria monocytogenes(LM) from pork meat to pork meat, conveyer belt and stainless steel, and cutting board at $10^{\circ}C$ for given times (2, 4, 24 hours). The adherence rates of ATCC and wild type LM from pork meat to red meat or fat meat after 2 hour contact time were approximately 65-79%, but 100% adherence rates of both LM after 6 hours were observed. The adherence rate of ATCC LM from pork meat to conveyer belt and stainless steel after 24 hours was 0.15%, while the adherence rate of wild type LM was rapidly increased from 4.34 after 2 hours to 28.6% after 24 hours. Also, The adherence rate of ATCC LM from pork meat to stainless steel after 24 hours ranged from 2.63% after 2 hours to 0.39% after 24 hours, while the adherence rate of wild type LM ranged from 0% after 2 hours to 24.4% after 24 hours. In the meantime, no adherence rate of both LM from pork meat to cutting board was observed. This results suggest that the adherence rate of LM from pork meat to pork meat or food contact surfaces was significantly affected by contact time and wild type LM showed much higher adherence rate to pork meat or food contact surfaces than ATCC LM.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.317-318
• /
• 2016

국제수로기구(IHO)는 수로분야의 다양한 데이터와 서비스 표준개발을 위한 프레임워크인 S-100 표준을 개발 하였으며, 이를 기반으로 차세대 전자해도 표준을 포함하는 제품 및 서비스 표준을 개발하고 있다. S-100 기반 제품표준을 개발하기 위해서는 S-100 표준에 부합하는 Feature Catalogue(FC)가 포함되어야 하며, 이를 지원하기 위해 S-100 Feature Catalogue Builder(FCB)가 개발 되었다. S-100 FCB를 이용하여, FC제작 시 Feature를 정의하기 위해서는 Attribute를 매번 입력 하게 되는데, 공통 Attribute를 입력함에 있어서의 입력 오류와 장시간의 제작 시간이 소요된다는 문제점이 발생한다. 이러한 문제점은 현 S-100 FCB가 객체지향 개념이 고려되지 못한 것으로 판단하고, 본 연구에서는 OOP(Object-Oriented Programming) 기반의 S-100 FCB 개발 방안을 연구하였다. 이를 통해 중복되는 정보의 입력을 줄이고 제작 시간을 단축 할 수 있을 것으로 예상된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.191-197
• /
• 2005

A new method, ToxTemp (TOXcity test based on TEMPerature control) using Ceridaphnia dubia was applied to evaluate the toxicity of insecticide materials and compared with the standard 48 hr acute bioassay. BPMC, diazinon and fenitrothion may cause the inhibition to the biological process in sewage treatment plant and need to detect toxicity within short contact time. The ToxTemp method showed sensitive detection with more shorter contact of 1-1.5 hr time than that of the standard 48 hr acute bioassay. To evaluate toxicity of real wastewater/sewage, the inhibition rate of nitrification and oxygen uptake rate (OUR) using activated sludge, the standard 48hr acute bioassay and ToxTemp method using C. dubia were compared, respectively. On the basis of the inhibition rate of nitrification, the OUR test showed the less sensitive results at the relatively strong toxic sewage. On the other hands, the standard 48hr acute bioassay and ToxTemp method using C. dubia represented the toxicity of each wastewater/sewage with high sensitivity. Even the slightly low (about 1.5%) sensitivity, the ToxTemp method showed the high applicability to the real site of sewage treatment plant.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.19
• /
• pp.52-58
• /
• 1975

During the germination of soybean (variety Peongyang: Glycine max L.) which was treated by hypochlorite and standard procedure. fructose content was highest and followed by glucose and galactose. Fructose. glucose and galactose decreased as germination period was longer. in the standard procedure. When hypochlorite was treated the fructose content was highest but galactose was almost negligible. and as the period of treatment was longer. fructose content decreased. The sucrose content increased until 96 hours and decreased thereafter. Over the whole period. the germinated soybean treated by hypochlorite showed higher sugar content than standard procedure. Raffinose decreased and disappeared after 96 hours in the standard procedure. and it didn't show up after 48 hours when treated by hypochlorite. Stachyose decreased in both case.

• Electrical & Electronic Materials
• /
• v.27 no.10
• /
• pp.11-21
• /
• 2014

1975년 이후로 태양전지 평가 실험실과 제조업체들이 직접적으로 많은 노력을 하여 태양전지 모듈에 대한 가속 스트레스 평가를 개발하고 평가하였다. 이 노력들은 이미 알려진 불량 메커니즘을 토대로 모듈 디자인의 민감한 취약 부분을 발견하기 위한 평가를 목적으로 평가 순서/방법 표준화에 많은 기여를 하였다. 이러한 평가 순서/방법은 국가와 국제 모듈 규격 표준화에 적용되었다. 그리고, 실제 외부에서 설치되어 한 번도 문제가 발생되지 않은 평가들은 중간에 제거 되기도 하였다. 가장 대표적인 예로 twist test는 모듈 설치 후 발생되는 불량에 대한 평가이지만, 실제로 불량은 한번도 발견되지 않았다. 덧붙여서, 표준 평가들은 많은 특화된 가속평가를 사용하게 되는데, 이는 문제점들을 조사하거나 특정 모듈 디자인에 대한 잠재적인 불량을 조사하기 위함이다. 실제 수명예측을 위한 가속평가는 가속 인자의 지식이 반드시 필요하지만, 태양전지 분야에서는 문헌이 많이 부족하다. 많은 연구자들이 85/85 DH 평가시간과 습한 지역에서 수년 간 사용된 모듈과의 상관관계를 만들기 위해 시도 하였다. 그리고 이 모델은 DH 평가 표준시간인 1,000시간으로 정의하는데 많은 영향을 미치기도 했다. 하지만, 이 모델은 단지 단일 모드 불량일 경우에만 적용이 되는 것이다. 다른 불량에 대한 가속인자들은 여전히 잘 알려져 있지 않다. 따라서, 모듈이 비록 표준 규격시험을 통과했다고 하더라도 제품이 특정 기간 동안 전력을 생산할 수 있다고 말할 수 없다. 또한, 이 표준평가가 모든 불량 메커니즘에 대한 평가가 되지 않기 때문에 제품의 수명을 결정하는데 사용될 수 없다.

• Journal of the Ergonomics Society of Korea
• /
• v.2 no.2
• /
• pp.25-27
• /
• 1983

당사는 부산에 위치한 각종 소화기 및 자동차부품 생산업체로서, 1972년 우리나라 중요 방위산업체의 하나로 발족하였다. 공장 발족 당시 공장의 배치 및 관리기술을 미국에서 도입하였기 때문에, 작업관리면에서도 I.E. 기법들이 적용되어 생산성 향상에 많은 성과가 있었다. 작업측정이 란 작업자가 행하는 여러가지 활동을 시간을 매체로 하여 측정하는 것으로서 작업 및 관리의 과학화 에 필요한 자료를 얻고자 하는 것인데, 그 주요 목적은 표준시간의 설정에 있다. 이러한 작업측정 은 크게 스톱 워치(stop watch)나 촬영에 의한 직접 측정방법인 시간연구법과 PTS (Predetermined Time Standards)법으로 나눌 수 있다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.44-48
• /
• 2002

본 논문에서는 한국형 디지털 서명 표준인 KCDSA에서 사용할 목적으로 개발된 국내 해쉬 함수 표준인 HAS-160 알고리즘을 VLSI 설계하였다. 하나의 단계연산을 하나의 클럭에 동작하고 단계연산의 핵심이 되는 4개의 직렬 2/sup 3/ 모듈러 가산기를 CSA(Carry Save Adder)로 구현하여 캐리 전파시간을 최소로 하고 HAS-160 해쉬 알고리즘의 특징인 메시지 추가생성을 사전에 계산하여 지연시간을 줄이는 설계를 하였다. 설계된 해쉬 프로세서를 0.25 urn CMOS 스탠다드 셀 라이브러리에서 합성한 결과 총 게이트 수는 약 21,000개이고 최대 지연 시간은 5.71 ns로 최대 동작주파수 약 175 MHz서 약 1,093 Mbps의 성능을 얻을 수 있었다.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.668-675
• /
• 2005

With the proliferation of wireless network and the advances of the embedded systems, the traditional distributed systems begin to include the wireless embedded systems. Clock synchronization in the distributed systems is one of the major issues that should be considered for diverse Purposes including synchronization, ordering, and consistency. Many clock synchronization algorithms have been proposed over the years. Since clock synchronization in wireless embedded systems should consider the low bandwidth of a network and the poor resources of a system, most traditional algorithms cannot be applied directly. We propose a clock synchronization algorithm in wireless embedded systems, extending IEEE 802.11 standard. The proposed algorithm can not only achieve high precision by loosening constraints and utilizing the characteristics of wireless broadcast but also provide continuous time synchronization by tolerating the message losses. In master/slave structure the master broadcasts the time information and the stave computes the clock skew and the drift to estimate the synchronized time of the master. The experiment results show that the achieved standard deviation by the Proposed scheme is within the bound of about 200 microseconds.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.349-353
• /
• 2008

This study was performed to determine the adherence rates of standard type Salmonella Typhimurium (ST) and wild type Salmonella spp.(WT) in pork after the following contact types and times at $10^{\circ}C$: pork meat (2, 6, 24 hr), conveyer belt (2, 6 hr), stainless steel (2, 6 hr), and cutting board (2, 6 hr). After 6 hr of pork meat to meat fat contact, the adherence rates for ST and WT were approximately 4.21 and 26.87%, respectively, and after 6 hrs of pork meat to red meat contact they were 16.40 and 27.48%, respectively. However, after 24 hr of both types of contact, ST and WT showed 100% adherence rates. The adherence rates for ST after 2 hr and 6 hr of pork meat to conveyer belt contact were 1.34 and 0.60%, respectively, while the adherence rate for WT was 5.14% after 6 hr of contact. After pork meat to stainless steel contact, ST showed adherence rates of zero and 1.59% after 6 and 24 hr of contact, respectively, while the adherence rates for WT ranged from 0.17% after 2 hr to 5.01% after 6 hr. On the other hand, neither ST nor WT offered adherence data following pork meat to cutting board contact. These results suggest that the adherence rates of ST and WT after pork meat to pork meat contact or pork meat to processing surface contact were significantly affected by the contact time and WT presented much higher adherence rates for both types of transmission than ST.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.329-344
• /
• 2009

Daylight saving time aims at spending effective daylight in summer season. Korea had enforced daylight saving time twelve times from 1948 to 1988. Since 1988, it is not executed, but it is recently discussed the resumption of DST. In this paper, we investigate the trend of DST in other countries, review the history of DST in Korea, and suggest the optimal DST duration in terms of astronomical aspects (times of sunrise and sunset). We find that the starting day of DST in Korea is apt for the second Sunday in Mayor the second Sunday in April according to the time of sunrise or to the difference between Korean standard meridian and observer's, respectively. We also discuss time friction that might be caused by time difference between DST and Korea Standard Time (KST).