• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.89-98
• /
• 2006

The weight-to-power ratio of the standard truck for the climbing lane design is known to be 200lb/hp. The value was known to be assumed based on constant trucks' capability and regional distributions in stead of widely varied distributions region by region. Additionally, this value was assumed after investigating registered vehicles' statistics instead of investigating real portions of truck volumes. Therefore, it may be said that the value of the current standard truck does not reflect regional or industrial diversity and proportions of truck volumes. To resolve these issues, the present paper studies diversified standard trucks which consider regionally or industrially diversified and observed-volume based weigh-to-power ratios. For this purpose, individual trucks' weigh-to-power ratios obtained at toll-gates of national expressways were used. For regionally based study, the whole nation are divided into 8 regions, then each region is characterized by a unit of a weigh-to-power ratio. The applicability of each value is provided. Results show that the single value for the nationwide standard truck may be 208 lb/hp, 8 lb/hp higher than the current value of 200 lb/hp. Results also show that regional values ranged widely from 170 lb/hp to 230 lb, 30 lb/hp higher/lower than the current value. Conclusively, regional diversity of trucks' weigh-to-power ratios was identified then three types of standardized weigh-to-power ratios which may represent regional characteristics were suggested. As the diversified standard truck are applied to the design standard, two benefits are expected such as decrease of rear-end accident rates or decrease of climb lane construction costs.

• Korean Architects
• /
• no.3 s.359
• /
• pp.90-95
• /
• 1999

WTO 세계무역기구의 발족과 더불어 국가간의 개방과 정책에 따라 건설시장은 물론 사회 전 분야에 걸쳐 새로운 시도가 이루어지고 있다. 건축 관련 부분은 민간사업뿐 아니고 정부 조달시장까지도 개방되어 정부부처나 지방 자치단체에서 구매하는 물품(설계 및 시공 포함)에 외국업체가 참여하고 있는 실정이다. 그러나 건축 설계의 경우 "서비스 무역에 관한 일반 협정"에 의해 원칙적인 기준만 체결되어 있을 뿐 상호인증에 관한 세부사항은 서로의 제도가 동일하거나 합의한 나라를 제외하고는 당사국간의 상이한 제도와 운영체제로 인하여 실용화되고 있지 않고 있다. 국내에서는 지난 4년간 "국가를 상대로 하는 계약에 관한 법률"을 제정하고 건설제도 기획단을 운영하여 시장개방에 대처해 왔으나 국제적인 건축 설계 관련 단체인 UIA와는 의견 교환이 없었다. 특히 상호인증에 따른 기본 요건으로 대두되고 있는 건축교육, 실습 및 훈련, 건축사 자격 등에 대한 우리의 입장을 정리하여 국제적으로 대응할 필요성이 요구되고 있으며 건축설계 관련자들에게 매우 중요한 관심사의 하나로 되어 있다. 따라서 이러한 문제를 논의하기 위해 국제건축가연맹(UIA)에서는 용역실무협의회를 설치하여 이미 2년여에 걸쳐 인정방법에 대한 세부사항을 검토하고 있으며, 올해(6월) 북경 총회에서 상호인정 표준안을 공포할 예정이다. 이와 관련하여 건축3단체(대한건축사협회, 대한건축학회, 한국건축가협회)주관으로 건축사자격 상호인정에 대한 공동 대응책을 논의하고자 건축계와 정부가 함께 참석하여 토론회를 개최한 바 있으며, 또한 본협회 국제위원회에서 한국측을 대표하여 지난 98년 12월에 열린 UIA 용역실무위원회(PPC)에 참석하여 상호인정에 대한 우리측 입장을 개진한 바 있다. 이에 본지에서는 문호 개방에 따른 한국건축의 현안에 대한 현실적이고 구체적인 문제점이 검토되고 아울러 우리 건축계의 입장 정리와 실질적인 의견을 수렴하고자 UIA 국제 표준안 전문에 이어 부록을 정리하여 게재한다

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.27-36
• /
• 2020

The purpose of this paper is to study on the applicability of the standard design response spectrum from the response spectrum analysis method, mainly applied to pile mooring facilities. To this end, after performing the ProShake 1-dimensional site response considering various geological conditions, the current standard design response spectrum was compared, and the ground-pile model in time history and two-dimensional site response analysis using Abaqus were performed to analyze the dynamic behavior of the ground-pile and to examine the selection method of the reference surface of the response spectrum on the installed slope, respectively. As a result, it was confirmed that no problems were found in the applicability of the current standard design response spectrum and no improvements are needed as well when considering the characteristics of the ground-pile dynamic behavior and the slope of the pile mooring facility.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.57-59
• /
• 1998

소프트웨어의 고품질화를 추구하는 것은 필수적인 일이다. 좋은 품질의 소프트웨어를 획득 또는 개발하기 위해서는 S/W 품질평가에 대한 효율적인 방법이 요구되고 있다. S/W 품질평가는 객관적이고 정량적으로 평가되어야 하므로 본 논문에서는 S/W 품질평가에 대한 표준 및 기준, 방침과 전문가의 지식을 반영한 규칙기반 시스템을 이용하여 평가함으로써 정확하고 신뢰성을 보장하도록 설계하였다. 특히 쉽게 지식을 변경 또는 추가할 수 있도록 규칙기반 시스템으로 설계하였으며, 이러한 규칙기반 시스템을 이용하여 질의 응답을 통해 쉽고 효율적으로 S/W 품질을 평가할 수 있는 기반/기초기술을 제공하였다.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.27-33
• /
• 2004

Particle Velocity Equations were suggested in this paper for Korean surface blasting types, which were developed by Korean Society for Explosive Engineers (KSEE). Standard charges per delay for types and distances also were determined. USBM equation which was adopted by MOCT (Korean Ministry of Construction and Transportation) shows many problems for Korean situations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.117-118
• /
• 2018

국제항로표지협회(IALA)는 담당 분야(AtoN, AIS, VTS, PNT)의 정보교환 표준개발을 위해 국제수로기구에서 개발한 S-100(범용 수로데이터모델)을 적용하기로 결정하고, S-200 시리즈의 제품 사양서(Product specification)을 개발하고 있다. 개발 중인 S-200 시리즈 제품 사양서로는 S-201 항로표지, S-210 IVEF, S-230 ASM, S-240 DGNSS 기준국 목록 등이 있으며 일부 표준은 개발 완성 단계에 있다. S-200 제품 사양서는 정보 교환을 위한 내용, 구조, 포맷, 심볼 등의 기술사항이 포함되어 있으므로 표준을 검증하거나 현업으로 적용방안을 검토하기 위해서는 테스트 베드를 통한 검증이 요구된다. 본 연구에서는 항로표지 분야 정보교환 표준인 S-200 시리즈 제품 사양서가 개발되고 있는 것과 관련하여 S-200 테스트 베드 설계 및 시범 개발 결과를 소개 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.199-201
• /
• 2023

VDES는 2015년 ITU-R M.2092-0가 발행된 이후로 다년간 기술 개발 및 개정 작업을 통해 2022년에 ITU-R M.2092-1이 발행되었다. 2026년 1월부터 VDES를 필수 규제 체계에 도입하기 위해 IMO는 2021년 MCS 103회의를 시작으로 NCSR 10에서 SOLAS 4장 및 5장의 수정안과 성능 기준 및 지침 개발을 논의하였고 24년 6월이면 작업이 완료될 것으로 예상된다. 자율운항선박 과제에서는 VDES를 이용하여 자율운항 선박의 안전관련 필수 정보들을 육상-선박 뿐만 아니라 선박-선박 연결에서도 데이터 교환을 할 수 있도록 VDES 시스템을 통신 방식 중 하나로 적용하여 개발하고 있으며 최신의 VDES 관련 표준을 유지할 수 있도록 지속적인 표준 분석 및 시스템 적용을 수행하고 있다. 본 논문에서는 VDES의 MAC 계층 설계를 위해 IEC에서 개발 중인 시험 표준을 분석하고 VDES 개발 시제에 적용하여 검증 및 평가를 수행하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.6
• /
• pp.5-13
• /
• 2019

The international trend in soil nailed wall design has been evolved from the allowable stress design to limit state design and it is still currently ongoing. The design guidelines in Korea and Hong Kong still adopts the allowable stress design philosophy while those in others mostly do the limit state design. In this study, four soil nail design methods presented in the major design guidelines (U.S. FHWA GEC 7 (2015), Clouterre in France (1991), Soil nailing - best practice guidance in U.K. (CIRIA, 2005), Geoguide 7 in Hong Kong (2008) and Design standard for slope reinforcement work in Korea (KDS 11 70 15 f: 2016)) are described and analyzed in brief. The factor of safety and CDR (Capacity-to-Demand Ratio) which is used to measure the degree of conservatism of a design guide are obtained for the two cases. One is the design example presented in CIRIA (2005) and the other is in-situ loading test performed on the top of backfill of the soil nail wall to investigate the conservatism of design guidelines. It is revealed that the design method in overall stability of soil nail walls in domestic design method (CDR=0.78) is the most conservative and those by Clouterre (CDR=0.99, 1.09), Geoguide 7 (CDR=1.13, 0.97), U.S. FHWA (CDR=1.09, 1.07) and CIRIA (CDR=1.40, 1.16) in order from the second most conservative to the least conservative for the design example presented in CIRIA. For the in-situ loading test performed on the top of backfill of the soil nail wall, the order of conservatism is identical except that the places of Geoguide 7 (CDR=0.66, 0.72) and FHWA (CDR=0.73, 0.72) are changed. However, the results obtained among U.S. FHWA (2015) and Clouterre (1991) and Geoguide 7 (2008) are not so different.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.308-319
• /
• 2016

In order to set the outdoor weather conditions to be applied to the design standard of the greenhouse heating and cooling system, outdoor air temperature and heating degree-hour for heating design, dry bulb temperature, wet bulb temperature and solar irradiance for cooling design were analyzed and presented. For every region in Korea, we used thirty years from 1981 to 2010 hourly weather data for analysis, which is the current standard of climatological normal provided by KMA. Since the use of standard weather data is limited, design weather conditions were obtained using the entire weather data for 30 years, and the average value of the entire data period was presented as a design standard. The design weather data with exceedance probability of 1, 2.5, and 5% were analyzed by the TAC method, and we presented the distribution map with exceedance probability of 1% for heating and 2.5% for cooling which are recommended by design standards. The changes of maximum heating load, seasonal heating load and maximum cooling load were examined by regions, exceedance probabilities, and setpoint temperatures. The proposed outdoor design conditions can be used not only directly for the greenhouse heating and cooling design, but also for the reinforcement of heating and cooling facilities and the establishment of energy saving measures. Recently, due to the climate change, sweltering heat in summer and abnormal temperature in winter are occurring frequently, so we need to analyze weather data periodically and revise the design standard at least every 10 years cycle.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1147-1161
• /
• 2015

The ISO/IEC 11179 Metadata registry (MDR) is an international standard that was developed to register and share metadata. ISO/IEC 11179 represents an MDR as a metamodel that is an object model. However, it is difficult to develop an MDR based on ISO/IEC 11179 because the standard has no clear criteria to transform the metamodel into a database. In this paper, we suggest the design of an MDR data model that is based on object-relational transformation methodology (ORTM) for the MDR implementation. Hence, we classify the transformation methods of ORTM according to the corresponding relationships. After classification, we propose modeling rules by defining the standard use of the transformation. This paper builds the relational database tables as an implementation result of an MDR data model. Through experiments and evaluation, we verify the proposed modeling rules and evaluate the suitability of the created table structures. As the result, the proposed method shows that the table structures preserve classes and relationships of the standard metamodel well.