• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.2
• /
• pp.155-161
• /
• 2015

Technetium-99m (^99mTc) is an important, short-lived decay product of molybdenum-99 (⁹⁹Mo), and it is considered the backbone of the modern nuclear diagnostic procedures. Since fission of ²³⁵U is the main source of production of ⁹⁹Mo, either highly-enriched uranium (HEU) targets or low-enriched uranium (LEU) targets are irradiated in the research reactors. The use of LEU targets is being promoted by the international community to avoid the proliferation issues linked with the use of HEU. In order to define the waste management strategy at the planning stage of establishment of an LEU based ⁹⁹Mo production facility, the impact of the use of LEU targets on the radioactive waste stream of the ⁹⁹Mo production facility was analyzed. Because the volume of uranium waste is estimated to increase six times, the use of high uranium density targets and the utilization of hot isostatic pressing were recommended to reduce the increased waste volume from the use of LEU based targets.

• Korean Journal of Animal Reproduction
• /
• v.21 no.4
• /
• pp.397-403
• /
• 1997

For the ultimate goal of efficient retrovirus vector-mediated transgenic animal production, we tried to increase virus titer by employing three methods: boosting virus production by treating virus-producing cells with sodium butyrate, concentration of virus stock by either filtration or ultracentrifugation. Compared to the control, applications of sodium butyrate (5 mM) treatment and filtration resulted in only 3 and 3. 6 folds of titer increases on bovine EBTr target cells, respectively. However, concentration of virus-containing medium by ultracentrifugation showed 12.5 folds of titer increase compared to the control (10${\times}$10$^5$ LacZ$^+$ TU Im), indicating the best method which can enhance retrovirus vector-mediated transgenic animal production.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.108-113
• /
• 1997

하나로(HANARO)를 이용하여 핵분열 방법으로 진단용 방사선원인 $^{99m}$ Tc의 모핵종인 Mo-99를 생산할 경우, HEU 및 LEU UO2 표적이 사용될 수 있다. 표적연료로서 HEU(93w/o $^{235}$ U)가 LEU(19.75w/o $^{235}$ U)에 비해 생성수율(Ci/gU)이 높게 나타났으며 제품의 질(quality)을 좌우하는 비방사능(Ci$^{99}$Mo/gMo)은 같게 나타났다. HEU가 같은 Mo-99의 방사능량을 얻기 위해서는 우라늄 장전량이 적어지므로 폐기물측면과 용해측면에서 이득이나 농축도를 고려하면, 큰 이득이 발생하지 않으므로 하나로에 LEU를 사용하는 것도 타당하다 할 수 있다.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.228-232
• /
• 2006

Purpose: electrophilic $^{18}F(T_{1/2}=110\;min)$ radionuclide in the form of $[^{18}F]F_2$ gas is of great significance for labeling radiopharmaceuticals for positron omission tomography (PET). However, its production In high yield and with high specific radioactivity is still a challenge to overcome several problems on targetry. The aim of the present study was to develop a method suitable for the routine production of $[^{18}F]F_2$ for the electrophilic substitution reaction. Materials and Methods: The target was designed water-cooled aluminum target chamber system with a conical bore shape. Production of the elemental fluorine was carried out via the $^{18}O(p,n)^{18}F$ reaction using a two-step irradiation protocol. In the first irradiation, the target filled with highly enriched $^{18}O_2$ was irradiated with protons for $^{18}F$ production, which were adsorbed on the inner surface of target body. In the second irradiation, the mixed gas ($1%[^{19}F]F_2/Ar$) was leaded into the target chamber, fellowing a short irradiation of proton for isotopic exchange between the carrier-fluorine and the radiofluorine absorbed in the target chamber. Optimization of production was performed as the function of irradiation time, the beam current and $^{18}O_2$ loading pressure. Results: Production runs was performed under the following optimum conditions: The 1st irradiation for the nuclear reaction (15.0 bar of 97% enriched $^{18}O_2$, 13.2 MeV protons, 30 ${\mu}A$, 60-90 min irradiation), the recovery of enriched oxygen via cryogenic pumping; The 2nd irradiation for the recovery of absorbed radiofluorine (12.0 bar of 1% $[^{19}F]fluorine/argon$ gas, 13.2 MeV protons, 30 ${\mu}A$, 20-30 min irradiation) the recovery of $[^{18}F]fluorine$ for synthesis. The yield of $[^{18}F]fluorine$ at EOB (end of bombardment) was achieved around $34{\pm}6.0$ GBq (n>10). Conclusion: The production of $^{18}F$ electrophilic agent via $^{18}O(p,n)^{18}F$ reaction was much under investigation. Especially, an aluminum gas target was very advantageous for routine production of $[^{18}F]fluorine$. These results suggest the possibility to use $[^{18}F]F_2$ gas as a electrophilic substitution agent.

• Korean Journal of Animal Reproduction
• /
• v.25 no.2
• /
• pp.171-180
• /
• 2001

Compared to other gene transfer system, the advantages of retrovirus-mediated gene transfer are technical ease, efficient expression and genetic stability. Despite the high potency of the retrovirus vector system in gene transfer, one of the drawbacks is a difficulty in concentration of virus stock. To overcome this problem, we tested a new retrovirus vector system producing the progeny retrovirus particles encapsidated with VSV-G (vesicular stomatitis virus G glycoprotein). The infectivity of this virus was not sacrificed by ultracentrifugal concentration and the host cell range extended from all mammalian to fish embryos. Virus titer after 1,000 x concentration was more than 10$^{8}$ CFU/ $m\ell$ on most of the target cell lines. We applied this pantropic viruses in transgenic chicken production by injecting the concentrated (100$\times$) stock into subgerminal cavity of stage X chicken embryos. The survival rate of chicken embryos after injection was about 20% and gene integration rate in surviving embryos was scored almost 100%. Analyses of RT-PCR and fluorescence microscopy, however, showed no evidence of the transgene expression.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.95-96
• /
• 2003

본 연구에서는 VSV-G(vesicular stomatitis virus G glycoprotein)로 포장된 MoMLV(Moloney murine leukemia virus) retrovirus vector system을 이용하여 GFP가 발현되는 형질전환 닭을 생산하고자 하였다. GFP 유전자를 retroviral vector 내의 RSV(Rous sarcoma virus) promoter의 조절 하에 도입한 후, Gp293 세포주에서 virus 형태로 생산하였으며, 이 virus를 초원심분리로 고농축하여 stage X 계란의 배 반엽 층에 주입하여 GFP가 발현되는 형질전환 닭을 생산하였다. 생산된 닭에서의 GFP의 발현은 epifluorescence stereomicroscope를 이용하여 확인하였다. 이 방법은 기존의 여러 형질전환 가금 방법에 비하여 기술적인 용이성과 경제성을 가지므로(Muramatsu, Park and Okumura 1998), 매우 효율적이고 주목할 만한 형질전환 가금 생산 방법으로 사료된다. 형질전환 가금의 생산에서 retrovirus vector를 이용하는 방법은 다양한 종류의 표적세포에 대하여 retrovirus 고유의 감염성에 의한 외래 유전자의 전이가 용이하고, 전이된 유전자가 진정염색질 영역 내로 선택적으로 도입될 수 있으며 유전적으로 안정성을 나타내므로 매우 효과적인 방법이다. 그러나 가금에서는 초기 배 발달에 의한 급격한 세포의 수적 증가로 인해 고감염성 virus의 획득이 요구되므로, 본 연구에서는 virus의 농축에 있어 보다 안정적이고 숙주 범위에 있어서 pantropic한 VSV-G에 기반을 둔 retrovirus vector system을 확립하였다. 이 system은 기존의 형질전환 닭의 생산방법에 비해 외래 유전자의 전이에 있어서 매우 효과적인 것으로 확인되었으며, 또한 여러 유용한 생리활성물질을 분비하는 형질전환 동물의 생산에 있어서 상당한 기여를 할 것으로 사료된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2008

[ $^{169}Yb$ ] industrial NDT sealed sources were developed by using $Yb_2O_3$ pellets as the target and demonstrated for their performance. To produce the pellets, optimal compacting and sintering conditions were determined experimentally. Source holders for $^{169}Yb$ were designed and fabricated. After assembling an active source produced from HANARO with the developed source holder, a demonstration experiment was performed to compare the quality of the radiographs from $^{192}Ir$ and soft X-rays. This demonstration study showed that the developed $^{169}Yb$ produced better radiographs than $^{192}Ir$ for a carbon steel with less than a 4 mm thickness.

• Korean Journal of Ichthyology
• /
• v.33 no.4
• /
• pp.205-216
• /
• 2021

Phylogenetic reconstruction based on one locus or a few loci can be misleading due to gene-tree/species-tree discordance. Species delimitation and intraspecific studies also often suffered from low resolution because of insufficient statistic power when few loci were used. Exon capture method is one of the most efficient way to collect genome-scale data, which can significantly augment studies that aimed to investigate patterns and histories of organisms at both intraspecific and high level. Here, I showed the advancement of shifting from single-gene method to genomic approach and the benefit of applying exon capture method comparing to alternative genomic techniques. Then, I explained the principle of exon capture method as well as providing detailed recommendations for applying this method. Finally, I demonstrated exon capture method using two applications and discussed future perspectives of this technology.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.149-155
• /
• 2011

This study was carried out to develop a method of removing unnecessary sugars and high-molecular weight soluble components from water extract by using various highly porous polymer resins: these resins are widely used as adsorbents for polyphenolic compounds. Each anthocyanin-rich fraction (ARF) that was eluted from column packed with 4 different resins (SEPABEADS SP207, 700, 850 and Diaion HP 20) was obtained from an aqueous extract of the ripe fruits of Rubus coreanus, which is well-known in Korea as "Bok-bun-ja". Among the above mentioned resins, Diaion HP20 had the highest efficacy and provided maximum yield of the ARF. The ARF eluted from the column packed with HP 20 exhibited the strongest antioxidant activity in vitro. Bioactive phytochemicals extracted from Rubus coreanus were investigated using the on-line HPLC-$ABTS^{{\cdot}+}$ system, and the resulting 6 peaks were identified as radical-scavenging components. By using liquid chromatography-mass spectrometry, 5 peaks were obtained, and these were identified as cyanidin-3-sambubioside, cyanidin-3-glucoside, cyanidin-3-xylosylrutinoside, cyanidin-3-rutinoside and pelargonidin-3-rutinoside. These results indicate that the use of appropriate porous resin (Diaion HP 20) leads to an increase in the yield of bioactive components and enhancement of their biological properties.