• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.482-487
• /
• 2016

Ultra-violet rays are very harmful to eye health care. The blocking of ultra-violet rays and a reduction of optical reflection in the visible light range, which is to increase the share of transmitted light, and avoid the formation of ghost images in imaging, are important for the applications of polymer eyeglasses lenses. In this study, the high-refractive index polymer lenses, n=1.67, were fabricated by injection-molded method with the xylene diisocyanate monomer, 2,3-bis-1-propanethiol monomer, and benzotriazol UV absorber (SEESORB 709) mixture. To reduce the reflection of the polymer lens surfaces, multi-layer anti-reflection (AR) coatings were coated for both sides of the polymer lens using an E-beam evaporation system. The optical properties of the UV blocking polymer lens were characterized using a UV-visible spectrometer. The material properties of the thin films, which were composed AR coating layers, refractive index, and surface roughness, were analyzed by ellipsometry and atomic force microscopy. As a result, the fabricated polymer lens perfectly blocked ultra-violet rays below 395 nm with a blocking rate greater than 99%.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.327-334
• /
• 2018

Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of $108^{\circ}$ when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.141-148
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hydrophobic silica aerogel. The surface modification of silica aerogel was performed to obtain UV curable urethane acrylate hybrid coating sols with good compatibility by using surfactant(Brij 56). The polycarbonate substrates were coated by the prepared composites and cured under UV radiation. The incorporation of aerogel with only 10 vol% of content resulted in remarkable improvement by about 28% in the thermal insulation property of the coated film, as compared with substrate. In addition, increasing aerogel content was found to give minor effect on the variation of optical transparency, adhesion, and surface hardness of the coated film.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.482-487
• /
• 2008

성능이 우수한 다성분계 전극을 개발하기 위하여 Ru를 주 전극성분으로 Pt, Sn, Sb 및 Gd를 보조 전극성분으로 하여 3, 4성분계 전극의 성능과 산화제 생성량 및 전극 표면 분석을 행하여 다음의 결과를 얻었다. 1. 2분 동안 단위 W당 제거된 RhB 농토는 Ru:Sn:Sb=9:1:1 > Ru:Pt:Gd=5:5:1 > Ru:Sn=9:1 > Ru:Sn:Gd=9:1:1 > Ru:Sb:Gd=9:1:1로 나타났다. Ru:Sn:Sb=9:1.1 전극에서 발생하는 free Cl, ClO$_2$ 및 H$_2$O$_2$농도가 다른 전극보다 높은 것으로 나타나 산화제 생성경향과 RhB 분해율과는 상관관계가 있는 것으로 사료되었다. 4성분계 전극 중에서 Ru:Sn:Sb:Gd 전극의 성능이 가장 우수한 것으로 나타났으나 3성분계 전극인 Ru:Sn:Sb=9:1.1 전극보다 성능이 떨어지는 것으로 나타났다. Ru:Sn:Sb=9:1:1 전극에서 생성되는 산화제 농도가 다른 두 종류의 산화제 농도보다 높은 것으로 나타났고 4성분 전극의 경우 Ru:Sn:Sb:Gd 전극의 산화제 농도가 Ru:Sn:Sb:Gd 전극이 높거나 유사한 경우로 나타나 산화제 생성 경향과 RhB분해 능과는 상관관계가 있는 것으로 나타났다. 초기 RhB 분해 속도가 높은 전극의 COD 제거율도 높은 것으로 나타났다. OH 라디칼은 발생하지 않지만 염소계 산화제 농도가 높고 RhB제거율이 높아 Ru를 주 성분으로 한 전극의 RhB분해는 주로 간접 산화작용에 의한 것이며, 개발된 3, 4성분계 산화물 전극은 간접 산화용 전극임을 알 수 있었다. 에칭을 하기 전의 Ti판은 표면이 매끄러운 것으로 나타났으며, 35% 염산으로 에칭한 후의 Ti메쉬는 매우 거친 표면조직을 가지는 것을 관찰할 수 있었다. Ru:Sn:Sb=9:1:1 전극과 Ru:Sn:Sb:Gd 전극의 SEM 사진을 관찰한 결과 두 전극 모두 전극 물질이 균일하게 도포되어 있었으며, 두 전극 모두 열소성을 통해 전극 성분을 코팅할 때 발생하는 "mud crack"이 발생한 것이 관찰되었다 EDX 분석에서 Cl이 관찰되었는데, 전극 성분의 불완전 산화로 인한 비양론적 산화물 때문이며 이는 RhB 분해성능과 관련 있는 것으로 사료되었다.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.242-247
• /
• 2005

Two kinds of colloidal silica(CS)/silane sol solutions were prepared in variation with synthesizing parameters such as kinds of CS, ratio of CS to silane and reaction time. Such sol solutions were obtained from 1034A Cs/methyl-trimethoxysilane(MTMS) and HSA CS/MTMS solutions. In the case of 1034A CS/MTMS CS/silane sol, coating film had high contact angle and more enhanced flat surface than those in the case of HSA CS/MTMS sol. In the case of thermal stability, thermal dissociation of 1034A CS/MTMS sol did not occur up to $550^{circ}$. The thickness of coating film obtained from 1034A CS/MTMS sol increased with increasing the amount of MTMS. The hardness of coating films obtained from 1034A CS/MTMS sol decreased with increasing the amount of MTMS. Surface free energy of CS/silane sol-gel coating film decreased with increasing amount of MTMS.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.490-500
• /
• 2004

Brown rice grains were coated by spraying aqueous protein solution extracted from rice bran using 10% ethanol, and dried at room temperature. Coating procedure was repeated 1-5 times to determine effect of repeated coating, Quality changes in coated brown rice grains were observed during 8 weeks storage. Most coated rice grains gave lower peroxide and acid values, which indicate antioxidative effects of coating. Lipase and lipoxygenase activities generally decreased in grains coated more than three times. Microscopic images of whole kernel and longitudinal section revealed cracking on all brown rice grains including control, and hydration rate constants were not significantly different among treated grains. Compared to non-coated brown rice grains, those coated more than three times, after 8 week storage, showed better quality retention observed in (meaning not clear) higher water-binding capacity, lower gel consistency decrease, less browning, and better textural properties in cooked rice, resulting in better sensory quality.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.127-127
• /
• 2003

전자종이에 대한 관심이 높아지면서 전자잉크의 pigment 소재에 대한 연구가 최근 활발하게 이루어지고 있다. 많은 재료 중 TiO$_2$는 비표면적이 크고 열적안정성 및 명암도가 뛰어나 전자잉크 재료로 많은 장점을 지닌다. TiO$_2$ 나노 입자를 전자종이에 적용할 경우 우수한 디스플레이 구현을 위해 높은 전기영동 특성 및 분산 안정성이 요구되어진다 이를 위해 표면 개질된 나노 크기의 루틸상 TiO$_2$ 입자의 제조 및 분산에 대한 최적의 공정조건에 대해 연구하였다. 10$0^{\circ}C$ 이하의 저온에서 가열하여 균일하게 침전시키는 저온균일침전법(HPPLT)으로 루틸 결정상의 TiO$_2$ 나노입자를 제조하였다. 제조된 TiO$_2$ 나노 입자와 용매의 비중을 맞추기 위해 비중이 낮은 투명성 polymer로 코팅을 한 후 비중병을 이용해 비중을 확인하였다. 그 후 copolymer block을 가지는 분산제를 TiO$_2$ 입자 기준 0.5-5wt% 범위에서 저유전율을 가지는 다양한 유기용매에 첨가하여 최적의 분산 및 전기영동 조건을 찾았다. 실험을 통한 분산안정성 및 전기영동 특성 평가를 위해 ζ-potential analyzer와 입도 분석기를 이용하였고 코팅된 입자의 표면상태는 FT-IR을 통해 측정하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.178-185
• /
• 2021

In this study, polyvinyl alcohol (PVA) and polypropylene glycol (PPG)-based polyurethane dispersion resin for wound coating was synthesized. And the physical properties of the sample were coated on the surface of the film sample and the leather (Full-Grain) to study the physical properties change. In the case of tensile strength, PUD-PA1, which reacted with the least amount of PVA, showed the highest resistance at 2.00 kgf/㎟. Likewise, the rate of elongation was measured as high as 554% for PUD-PA1, which reacted with the least amount of PVA. The abrasion resistance measurement result showed that as the PVA response increased, the strength of the surface decreased to 36.77 mg.loss.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.81-82
• /
• 2008

하이브리드 코팅 시스템을 이용하여 $CrMoC_xN_{1-x}$ 박막을 AISI D2와 실리콘 웨이퍼 모재 위에 증착하였다. 박막 내 탄소 함량은 $CH_4/(CH_4+N_2)$ 가스 유량 증가에 비례하여 증가했다. 탄소 함량이 0.33일 때 44GPa의 최대강도 및 -4.4GPa의 잔류응력을 나타내었다. CrMoN 박막의 평균 마찰계수는 0.42이지만, 탄소함량을 증가함에 따라 0.31까지 감소 하였다. 이것은 박막 표면과 스틸볼 사이에서 탄소가 풍부한 층이 형성되어 일종의 고체윤활제 역할을 했기때문이다. 박막의 미세조직은 X-ray diffraction, Scanning electron microscopy, 그리고 X-ray photoelectron spectroscopy를 이용하여 분석하였다.

• Culinary science and hospitality research
• /
• v.21 no.6
• /
• pp.303-311
• /
• 2015

This study was carried out to evaluate the possibility of polyols for coating material of chewing gum. Five polyols xylitol, maltitol, isomalt, erythritol, and sorbitol were compared the coating quality, coating and drying time, and color differences. Maltitol was evaluated to be the best quality for coating the gum, whereas erythritol and sorbitol were not considered for coating materials for gum. These results derived from irregular surface layer and low productivity due to increased coating time. According to changes in color of chewing gum, samples coated maltitol and xylitol and isomalt stored at high temperature. In addition, color difference of sample coated maltitol was calculated 2.88 stored at $80^{\circ}C$ for 1 day, but those of xylitol and maltitol were highly evaluated. Sample coated maltitol in polypropylene bag was stored and measured for 1 month. Changes in color of sample was slightly occurred at below $40^{\circ}C$ and the color difference was not more than 3 at $60^{\circ}C$. Chewing gum coated maltitol as coating material was expected more stable in the quality of color during distribution. Current study was performed to color changes during storage, further study will be proceeded about shelf-life of chewing gum coated polyols.