• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.30-30
• /
• 2023

한국산 체꽃속(Scabiosa L.)의 외부형태형질을 바탕으로 구분한 5가지 변이 유형[솔체꽃(S. comosa) Type 1-2, 체꽃(S. tschiliensis f. pinnata) Type 3-4, 구름체꽃(S. tschiliensis f. alpina) Type 5]에 대해 잎 표피와 화분의 미세구조를 관찰하였다. 잎 표피세포의 크기는 향축면은 평균 12.4 × 6.7 ㎛로, Type 1이 가장 작고 Type 3가 가장 컸으며, 배축면은 평균 9.4 × 4.6 ㎛로 모든 유형이 비슷하게 나타났다. 모용은 단세포성 선상 모용이 일부 유형에서, 다세포성 비선상 모용이 모든 유형에서 관찰되었다. 선상 모용은 향축면에서 Type 1과 5에만 있었으며, 두 유형 중 Type 5의 모용이 길이 72.2 ㎛로 더 길고, 단위면적 (0.01 mm²) 당 개수도 5개로 더 많았다. 배축면에서는 Type 1, 3 및 5에 있고, 단위면적 당 개수가 Type 1과 5는 3~6개로 비슷하였으나, Type 3은 1개 이하로 매우 드물게 나타났다. 기공복합체는 부등형으로 양면에 분포하며, 향축면의 공변세포 크기는 평균 4.4 × 2.7 ㎛로 너비는 유사하나 길이는 Type 1과 5가 3.1 ㎛, 3.9 ㎛로 나머지에 비해 작았다. 단위면적 당 기공의 수는 향축면과 배축면이 평균 40.2개, 149.2개이고, 양면 모두 Type 1이 66.3개와 177.2개로 가장 많았다. 화분은 모두 단립으로 삼구형이고, 극축 길이(P)와 적도면 지름(E)의 비율은 0.83~1.12로 모양은 아단구형~약장구형이다. 표면무늬는 과립상 표면에 자상 돌기가 있고, Type 3과 4에서만 유공상이 확인되었다. 이상의 결과에서, 솔체꽃 유형인 Type 1과 2가 잎 표면의 선상 모용 유무 및 기공의 수에 뚜렷한 차이를 보여 Type 1은 솔체꽃과는 다른 새로운 변종 또는 품종일 가능성이 있다고 생각된다. 또한 체꽃 유형인 Type 3과 4의 경우, Type 3의 잎 배축면에 털이 드물게 있으나, 두 유형의 화분 표면무늬가 동일하고, 다른 형질들도 모두 중복되어 연속적인 변이로 보이며, 구름체꽃 유형인 Type 5는 나머지 유형과 뚜렷이 구분되었다.

• Research in Plant Disease
• /
• v.9 no.1
• /
• pp.42-46
• /
• 2003

Conidiomata of the Rosellinia necatrix were induced in axenic culture under near ultraviolet light radiation. Pieces of sterilized Japanese pear twigs were placed on the 7 days-old oatmeal agar culture in plates. The plates were further incubated far 5 days and then illuminated by under near ultraviolet light radiation. Syn-nemata were developed on twigs in 19 out of 20 isolates tested within 5 weeks, and conidia were observed in 12 out of the 19 isolates. The synnemata and conidia produced were morphologically identical to those of Dematophora necatrix.

• Research in Plant Disease
• /
• v.22 no.1
• /
• pp.18-24
• /
• 2016

This study was conducted to elucidate the cultural and pathogenic characteristics of Cladosporium cucumerinum PT1 and resistance of 81 commercial cucumbers (Cucumis sativus). Cucumber leaves and fruits appeared as scab were collected from a plastic film house located in Pyeongtaek, Gyeonggi-province, Korea in late March, 2015. A casual fungus was isolated from the diseased fruits on potato dextrose agar and it was identified as C. cucumerinum PT1 based on the morphological characteristics. To find out the effect of wounding and fruit size on the development of cucumber scab, small (<10 cm long), medium (10 to 20 cm long), and large (>20 cm long, commercially mature fruit) size cucumber fruits were harvested, C. cucumerinum PT1 pathogens were inoculated with a single droplet of suspension ($1{\times}10^5$ spores/ml) on wounded or unwounded cucumber fruits. Small fruits were completely damaged with showing severe water-soaking symptoms and fast pathogen growth regardless of wounded or unwounded. Meanwhile slight water-soaking symptoms on medium and large size fruits occurred and disease development into plant tissues was observed only on wounded fruits. Disease resistance of 81 commercial cucumber cultivars was evaluated on third-stage seedlings and small fruits by inoculating suspension ($1{\times}10^5$ spores/ml) of C. cucumerinum PT1. As a result, mini and pickling cultivar groups were resistant, 'Cheoeumcheoreom' cultivar was symptomless and the other cultivars were resistant to medium resistant. On the other hand, most of cucumber cultivars belonging to the other groups were susceptible. Disease resistance of cucumber against cucumber scab was significantly different among cultivars and a few cucumber cultivars showed different disease resistant responses to two bioassay methods using seedlings and small fruits. Therefore, to screen scab resistance in cucumber, a test using both fruits and seedlings is advisable. We think that the selected resistant cultivars can be used to control cucumber scab effectively under the farmhouse condition.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.499-502
• /
• 2012

문양이나 패턴이 없는 민 무늬의 물체에는 동일점 정합에 의해 3 차원 계측을 하는 스테레오 정합방식을 적용할 수 없다. 본 논문에서는 난수 발생 함수로 제작한 랜덤 칼라 패턴을 대상물체에 투영하여, 대상 물체 표면에 특징적인 문양을 인위적으로 생성시키는 것에 의해 민 무늬의 물체를 스테레오 정합법으로 측정하는 방식을 제안한다. 투사된 패턴으로 자체 문양을 지니게 된 물체를 스테레오 카메라로 촬영하였고, 동일점 정합은 전역 스테레오 정합 방식의 일종인 TRW 방식에 의한 컬러 매칭 방식을 사용하였다. 제안된 방식은 원형의 흰색 석고상 3 차원 계측에 적용되었고, 안정적이고 정확한 스테레오 정합 계측 결과를 보였다.

• Journal of the Korean earth science society
• /
• v.27 no.6
• /
• pp.591-605
• /
• 2006

The purpose of this study is to investigate the relationship between lunar and earth rotation, by quantitatively describing the rotation of lunar configuration which is observed during the lunar diurnal motion. Our research suggests that observation of the lunar diurnal motion could be used as a study topic in the earth science courses. The rotation of the lunar configuration is an apparent phenomenon that can be seen when an observer. standing on the ground. looks at the moon as if the lunar dark configuration rotates on the basis of horizontal line. In spite its competence as a study topic because it is observable by naked eyes, there are only few major textbooks that introduce this phenomenon with regard to the earth rotation. Therefore, this study induced the mathematical principle of the lunar rotation in detail and proposed that this could be developed as a scientific inquiry through practical observation. In addition, an analytical proof and qualitative method of explanation of the lunar reverse rotation were also presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.602-608
• /
• 2005

We have studied to obtain the SAW filter for the Single Phase Unidirectional Transduce. (SPUDT), was formed on the Langasite substrate and was evaporated by Aluminum-Copper alloy and then we performed computer-simulated by simulator. We can fabricate that the block weighted type IDT as an input transducer of the filter and the withdrawal weighted type IDT as an output transducer of the filter from the results of our computer-simulations. Also, we have performed to obtain the properly conditions about impedance matching of the SAW filter for SPUDT. We have employed that the number of pairs of the input and output IDT are 50 pairs and the thickness and the width of reflector are 5000A and $3.6{\mu}m$, respectively. And the width of IDT' fingers is $2.4{\mu}m$, and the space between IDT' finger and reflector is $2.0{\mu}m$. Frequency response of the fabricated SAW filter has the property that the center frequency is about 190MHz and bandwidth at the 3dB is probably 7.7MHz after when we have matched impedance. Also, we could obtain that ripple characteristics is less than 0.4dB and standing wave ratio is probably 1.5 after when we have matched impedance.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.449-457
• /
• 2016

A stoneware bottle was recovered from the Incheon Yeongheungdo Shipwreck in 2013. Primary observations showed that this object had a sealed opening and was covered with a foreign material. After it was cleaned via mechanical and chemical methods, wave patterns were observed on the outer surface of the bottle and a yellowish-brown transparent material was found within. In this paper, the process of conserving the stoneware bottle and the analysis conducted on the unknown material found within is explained. The conservation process included steps such as cleaning, desalination and restoration. After of the missing area located at the rim, the original shape of the bottle was made clear. In addition, the unknown inner material was analyzed using FT-IR and GC-MS. Results showed that the material is similar to golden lacquer. It is speculated that the Yeongheungdo Ship had wrecked during the Unified Silla period while carrying a bottle loaded with golden lacquer.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.344-354
• /
• 2019

In seven species of Korean Asarum, 44 qualitative and 28 quantitative characters were reviewed taxonomically. Among 44 qualitative characters observed in vegetative and reproductive organs, the states of 27 characters were common in all the seven species. Among 28 quantitative characters, five characters have the same values in all the seven species; the number of cataphyll (2-4), leaf (2), calyx lobe (5), stamen (12) and pistil (6). White spots on adaxial surface of leaf (effectively) distinguished A. maculatum and A. versicolor from the other species. Many long soft hairs on abaxial surface of leaf distinguished A. mandshuricum from other species with short hairs. The glandular hairs on inner surface of calyx tube were divided into 2 types, reflecting the taxonomic relationships between the species: Type 1 has non-stalked glandular hairs (A. maculatum, A. sieboldii and A. sp.), and Type 2 has stalked glandular hairs (A. patens, A. versicolor, A. mandshuricum and A. misandrum). The length, shape, colour of calyx lobe and the extent to which the calyx lobe recurves, as well as the diameter and colour of calyx tube throat, were confirmed to be taxonomically valuable. In the case of glandular hair density on the surface of calyx lobe, A. patens with low density and A. sp. with high density were clearly distinct from all the other species with intermediate hair density. Meanwhile, the stylar protuberance length of A. patens (2.9-3.3 mm) was strikingly different from other species (1.4-2.5 mm). Additionally, further examination of the identities of A. yeonbyeonense and A. yeonbyeonense var. viridiluteolum is required.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2011.05a
• /
• pp.107-108
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.242-242
• /
• 2004

다양하게 변화하는 소비자의 요구에 만족하기 위해 제품 디자인의 빠른 변화가 요구되며 이에 따라 빠르게 3차원 형상을 구현하는 기술이 필요하게 되었다. 일반적으로 사용되는 적층 방식의 쾌속 조형기술은 고가의 재료비 및 운영비, 기능성 파트 제작의 어려움, 표면에 적층 무늬가 존재 등의 문제점이 존재한다. 그러나 기계 가공 방식의 경우 다양한 재료의 가공이 가능하고 높은 형상 정밀도가 유지되는 장점이 있다. 특히, 폼을 이용하여 3차원 형상을 구현하는 방법은 현업에서 많이 사용되고 있다.(중략)