• The Journal of Korean Physical Therapy
• /
• v.26 no.5
• /
• pp.280-289
• /
• 2014

Purpose: This study was conducted in order to determine the stimulation variables which should be considered when neuromuscular electrical stimulation (NMES) is applied for a muscle under the normal innervation to minimize muscle fatigue and increase force-generating ability. Methods: A total of 23 healthy men participated in the study and all subjects were randomly assigned to the 1:1 group, 1:3 group, 1:5 group, and control group with on-off ratio of NMES. The subjects performed a fatigue task, consisting of 10 times of isometric contraction sustained by NMES. NMES using Russian current stimulation was applied to muscle fatigue and divided into three sessions by pulse frequency (10 bps, 30 bps, 90 bps). The EMG was recorded using an MP 100 system from the quadriceps femoris muscle in four groups. Results: The differences of delta MdF and delta MF of between on-off ratio groups of 10 bps, 30 bps, and 90 bps pulse frequencies were very significant (p<0.05). According to the results of post hoc of 10, 90 bps, it was greater in the 1:1 group and the 1:3 group compared with the 1:5 group, and no fatigue was observed in the control group. In 30 bps, it was greater in the 1:1 group compared with 1:3, 1:5, and control group (p<.05). Conclusion: Among NMES variables to minimize muscle fatigue, the larger on-off ratio by pulse frequency showed the lower muscle fatigue. Therefore, on-off ratio needs to be great enough, and will be more efficient with the frequency 30 bps rather than of 10 bps and 90 bps.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.283-291
• /
• 2010

The purpose of this study was to investigate the effect of foot placement and height of bed surface on lumbar spine load in a dummy transfer activity. Fifteen healthy male students participated in this study. All subjects were involved in four different conditions according to foot placement (11 figure and $90^{\circ}$ figure) and height of bed surface (44 cm and 66 cm) randomly. Muscular activations of the biceps brachii, rectus femoris, elector spinae using surface-EMG, vertical ground reaction using force plate, and L4/L5 compression force using 3DSSPP (3D Static Strength Prediction Program) were measured and analysed. The results showed that muscular activations were not significantly different for the various conditions except for the rectus femoris on the right side (p<.05). Futhermore, the vertical ground reaction and L4/L5 compression force were significantly different conditions (p<.05). In conclusion, it is suggested that foot placement at $90^{\circ}$ figure is safer for transfer activity compared with the 11 figure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.476-482
• /
• 2017

This study examined the effects of the seat height of a chair on the muscle activity of the erector spinae and rectus abdominis. Thirty healthy subjects were asked to sit on chairs at three different seat heights. The muscle activities of both the erector spinae and rectus abdominis were measured by surface electromyography. The data were analyzed by repeated one way ANOVA and the muscle activity was compared according to the seat height. The alpha level was set to 0.05. The results showed that the muscle activities of the erector spinae were not significantly different among the three seat heights. The muscle activities of the rectus abdominis were significantly different among the three seat heights. Both the rectus abdominis muscle activities were significantly greater in the low seat height than the other seat heights. These results showed that the seat height of the chair affects the muscle activities of the rectus abdominis muscle, leading to musculoskeletal pain, such as low back pain. Therefore, the seat height of a chair with a correct sitting position is important for preventing musculoskeletal pain.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.109-128
• /
• 2003

This study tested whether repeated measurement of median frequency (MDF)-related variables could express the muscle power changes during a 12-week DeLome strengthening program, by using consecutive overlapping FFT (Fast Fourier transformation) and integrated EMG (IEMG) from surface EMG data for isometric and isotonic exercise. To evaluate the effect of training, the following were recorded every 3 weeks for the elbow flexors and knee extensors of 5 healthy male volunteers: MVC, lRM, limb circumference, and surface EMG during isometric MVC or isotonic contraction at 10RM load. From the EMG data, IEMG and variables from a regression analysis between MDF and time were obtained. MVC, lRM, IEMG, and initial MDF increased linearly over the training period. The fatigue index and slope of the regression line increased temporarily until the 6th week and decreased thereafter. From these results, there appeared to be enhanced neural recruitment of fast twitch fibers in the first 6 weeks and continued enhancement in the recruitment and hypertrophy of fast twitch fibers, which led to increased fatigue resistance, over the last 6 weeks. Accordingly, the MDF and IEMG analysis technique could demonstrate the effect of the program detected significant changes in both isometric and isotonic contractions. EMG analysis methods can be used to estimate the electrophysiological and histological changes in skeletal muscles during a strengthening program.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.51-62
• /
• 2003

The purpose of this study was to compare the relative accuracy of a range of computer-based analysis with respect to EMG onset determined visually by an experienced examiner. Ten healthy students (6 male, 4 female) were recruited and three times randomly selected trials of isometric contraction of wrist flexion and extension were evaluated using four technique. These methods were compared which varied in terms of EMG processing, threshold value and the number of samples for which the mean must exceed the defined threshold, and beyond 7% of maximum amplitude. To identify determination of onset time, ICCs(Intraclass Correlation Coefficients) was used and inter-rater arid intra-rater reliability ranged good in visually derived onset values. The results of this study present that in wrist flexion and extension, the reliability of the inter and intra-examiner muscle contraction onset times through visual analysis showed beyond .971 with ICCs. The reliability of the muscle contraction onset time decision through visual reading, tested with computer analysis, showed a relationship of all the selected analysis methods with ICCs .859 and .871. The objective computer-based analysis comparing with visual reading at the same time is the effective and qualitative data analysis method, considering the specificity of each study method.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.205-212
• /
• 2015

The purpose of this study was to find out the effect that muscle activity of upper extremity and functional test in the case of the stroke patient by using the feedback mirror therapy. Sixteen subjects were recruited and randomly divided into two groups. one group was trained feedback mirror therapy and other group was action observation training. This process was carried out five times a week for eight weeks. To upper extremity test was used to MFT, FMA and in order to test UT, DM, BB, FCR, ECRL used to muscle activity. After the training, exclude FCR an upper extremity motor function of target showed significant difference between two groups and especially an experimental group showed significant muscle activity and MFT, FMA score improvement of UT, DM, BB, ECRL. Therefore, feedback mirror therapy is more upper extremity motor function and muscle activity improvement effect than action observation training.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.192-204
• /
• 2004

The surface electromyographic(sEMG) analyses were knee joint angle during open kinetic chain exercise (OKC) and close kinetic chain exercise (CKC) in vastus medialis (VM), vastus lateralis (VL), and rectus femoralis (RF). Ten subjects with normal , aged 20 to 30(X=27.4, SD=3.23), were randomized Statistical techniques for data analysis were applied paired t-test. The 0.05 level of significane was used as the critical level for rejection of the null hypotheses for the study. And the results were: 1) Both OKC and CKC improved the strength of quadriceps muscle as the knee joint flexion was increased. 2) In OKC, the strength of VM was improved the most at the 30 degree angle. 3) In CKC, the strength of VM was improved the most at the 30 degree angle. 4) The VM/VL ratio was the largest at the 10 and 20 degree angles in OKC and CKC. 5) The VM/VL ratio at 10, 20, and 30 degree angles was significantly different between OKC and CKC (P < 0.05). Base on the results, the OKCE is recommended for the knee joint patients, especially for the patellofemoral pain syndrome patients, during the early phase of rehabilitation. In order to improve strength of the quadriceps, muscle strength training at 30 degree angle is recommended. In order to improve VM/VL ratio, 10 and 20 degree angles are recommended during OKCE and CKCE, respectively. Future researches are warranted comparing electromyographic analysis between OKCE and CKCE in the quadriceps at a certain work lead, and muscle strength performance in the quadriceps at different positions of foot.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.126-134
• /
• 1990

In this study, eight function discrimination and recognition of the EMG signal from the biceps and triceps of 4 subjects were executed, using the Euclidean and weighted cepstral distance measure with LPC cepstrum coefficients. In case of Euclidean cepstral distance measure, as the number of LPC cepstrum coefficients was increased in 8, 10, 12, 14 the recognition rates of functions are 94.69, 95.63, 96.56, and 96.88[%], respectively, but increasing rates of recognition were inclined to decrease. In case of weighted cepstral distance measure, when the number of LPC cepstrum coefficients was 8, 10, 12 and 14, the recognition rates of functions were 91.88, 95, 99.69, and 96.63[%], respectively.

• Physical Therapy Korea
• /
• v.12 no.1
• /
• pp.63-70
• /
• 2005

To compare the effects of forward walking and backward walking on surface electromyographic analysis of quadriceps muscles at treadmill grades of 0%, 5% and 10%, subjects were randomized to eleven athletics (5 females, 6 males), with a mean age of 17.8 years, and a SD of 4.66 years. The values of the surface electromyographic (SEMG) activity of the rectus femoris (RF), vastus lateralis (VL) and vastus medialis oblique (VMO) were measured during forward walking and backward walking on a treadmill at grades of 0, 5 and 10%. The subjects walked for approximately 10 seconds at 4.0 km/h. The data were analyzed by repeated measuring of the two-way ANOVA and analyzed by a paired t-test between forward walking and backward walking. The SEMG activity levels of the RF, VL and VMO were the highest when both the forward walking and backward walking increased incrementally for treadmill grades of 0% to 10%, but the VMO/VL ratio had no significant changes. The SEMG activity levels of the RF, VL and VMO were significantly different between directions. However, SEMG activity levels of the RF, VL, VMO and VMO/VL ratio did not show significant difference among the treadmill grades. No statistically significant interactions were detected between the direction of walking and treadmill grade. Backward walking on the treadmill at 4 km/h and grades of 0%, 5%, 10% elicited a greater SEMG activity on the quadriceps muscles than did forward walking under the same conditions. The results suggest that the quadriceps may be effectively activated by performance at treadmill grades of 10%. This investigation confirms that backward walking up an incline may place additional muscular demands on individuals.

• Physical Therapy Korea
• /
• v.18 no.1
• /
• pp.37-46
• /
• 2011

The purpose of this study was to investigate intra-rater reliability and determine the validity of electromyography (EMG) measurements to represent muscle activity and ultrasonography (US) to represent muscle thickness during manual muscle testing (MMT) to external abdominal oblique (EO) and lumbar multifidus (MF). Twenty healthy subjects were recruited for this study and asked to perform MMT at differing levels. The subjects' muscle activity using EMG was measured by a ratio to maximum voluntary contraction (MVC) and root mean square (RMS) methods. The subjects' muscle thickness using US was measured by raw muscle thickness and change ratio of thickness to maximum (MVC) or resting condition. In three trials, measurements were performed on each subject by one examiner. The intra-rater reliability of measurements of EMG and US to EO and MF was calculated using intra-class coefficients. The intra-rater reliability of all measurements was excellent (ICC=.75~.98) in EMG and US. The conduct validity was calculated by one-way ANOVA with repeated measurements to compare whether the EMG and US measurements were different between MMT at different levels. There was only a significant difference between all grades at %MVC thickness measurement of US. These results suggest that a %MVC thickness measurement of US was a more sensitive and discriminate in all manual muscle testing grades. This information will be useful for the selection of US measurement and analysis methods in clinics.