• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.43-43
• /
• 2011

현대인들은 생활환경에서 발생하는 각종 미세먼지 등의 입자상 오염물질 뿐만 아니라 각종 VOCs 등의 가스상 오염물질과 곰팡이, 박테리아, 바이러스 등 생물학적 오염물질까지 생활공간 내의 공기환경은 점점 악화 되고 있으며 공기 정화 등의 필요성이 증대 되고 있다. 이에 본 연구에서는 닥 펄프와 활성탄이 주성분인 Sheet를 Corrugation 장치를 통해 편파형(골판지)으로 제작하고, 다시 다층 구조로 적층된 골판지 sheet을 제작한 후 이를 두께 방향으로 일정 폭(20mm이하)으로 절단하여 필터부품의 소자로 이용하는 활성탄 필터의 제조 및 그 특성을 확인하고자 하였다. 닥펄프/펄프와 무기물의 혼합비, 해리시간 등의 변화를 주어 샘플을 만들었고, 강도, 평활성, 생산성 향상을 위해 첨가보조제 선정을 하였다. 이렇게 제조된 필터의 물리적 특성을 알아보고자 인장시험을 실시하였고, 주사전자현미경을 통하여 필터의 평활성과 표면을 관찰하였고 흡착성능 및 기능성을 VOCs 방출량, 탈취율, 항균도, 곰팡이 저항성 등의 실험을 통하여 알아보았다.

• Korean Journal of Plant Taxonomy
• /
• v.42 no.1
• /
• pp.24-39
• /
• 2012

The palynological study of 31 taxa of Korean Artemisia L. was carried out to evaluate their taxonomic characteristics and to determine the relationships among the taxa. The size and shape of the pollen are not used as characteristics to classify the taxa of Korean Artemisia L., but the granule distribution ands pinule connection on the exine were useful for an interspecific classification and for reflecting the relationship between some taxa. It is considered that Artemisia pollen has evolved from a connected spinule and a nearly psilate surface into 1) a connected spinule and a granule surface, 2) a disconnected spinule and a granule surface, 3) a disconnected spinule and a dense granule surface. These pollen characteristics with external morphological characteristics, a geographical distribution and a somatic chromosome number are considered to be good characteristics for distinguishing the relationship of some taxa, such as the A. japonica group (A. hallaisanensis, A. angustissima, A. littoricola) and the A. sacrorum group (A. sacrorum var. sacrorum, A. sacrorum var. incana, A. sacrorum var. iwayomogi).

• Journal of Ocean Engineering and Technology
• /
• v.4 no.2
• /
• pp.250-250
• /
• 1990

In this paper, fatigue tests were carried out at stress test levels of 461 MPa, 441 MPa, and 431 MPa by using smooth specimen of$2_{1/4}$ Cr-1 Mo steel with the stress ratio(R) of 0.05. The initiation, growth and coalescense process of the major cracks and sub-cracks among the fatigue cracks on the smooth specimen are investigated and measured under each stress level at a constant cycle ratio by the replica technique with optical microscope. Some of the important results are as follows: In spite of the difference of stress levels, the major crack data gather into a small band in the curve of surface crack length and crack depth against cycle ratio N/Nf. The sub-crack data, however, deviate from the band of the major crack. The growth rates, da/dN, of major and sub-crack plotted against the stress intensity factor range, ${\Delta}K$, have the tendency to be compressed on a relatively small band. But it is more effective to predict fatigue life through major cracks. The propagation behavior of surface microcracks on the smooth specimens coincides with that of the specimen having an artificial small surface defect or through crack.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.140-140
• /
• 2017

4륜 장착 자동차의 토크 전달은 2륜 구동, 4륜 구동 모드를 간단히 전환하는 방식(part time 4WD)과 항시 사륜 구동 모드에서 전후륜의 토크 전달비를 제어하는 방식(AWD, all wheel drive)이 있다. 경제의 발달에 따라서 취미 인구의 확대로 국내에만 180만 명의 R/C car 사용자가 있다. 이 중 2WD-4WD의 전환을 differential lock mechanism으로 구현한 수입산 모델의 가격이 1,000,000원을 호가하지만 가변 제어 방식이 아닌, 정차 후 2-4륜 구동 전환 방식을 적용하고 있으며 상대적으로 내구성이 떨어진다. DC motor의 출력이 늘어나고 배터리의 성능이 좋아진 현재 소형 RC car의 최고 속도는 80 km/h 정도로 빨라졌다. 그러나 마찰 계수가 낮은 노면(실내의 대부분 평활 처리된 복도)에서는 2륜 구동 모드의 활용도가 매우 낮다. 미끄러운 노면에서 후륜 구동 모드로는 oversteer가 발생하여 차량이 스핀하기 쉽고 전륜 구동 모드로는 understeer가 발생하여 제대로 된 코너링이 어렵다. 상시 4륜 구동 모드는 에너지 소모가 크고 전후륜이 tight coupling되어 있는 문제 때문에 일반적인 노면에서 부드러운 코너링이 잘 이루어지지 않는 문제가 있다. 본 연구에서 제안하는 방식은 그림 1와 같이 center shaft의 중간에 영구 자석으로 만들어진 토크 전달용 판이 있고 그 사이에 자계를 차폐할 수 있는 강자성체 셔터를 서보 기구에 연결하여 서보 회전각에 따라서 구동 쪽의 토크가 피구동축으로 전달되는 양을 연속 가변제어할 수 있다. 토크 전달용 판의 차폐 면적에 따른 토크 전달양을 전/후륜 바퀴의 Static torque를 통해 측정하였으며(그림 2), 공중 상태에서 즉 공기저항만을 고려한 상태에서의 RPM 회전수 차이 측정(그림3)을 통해 구동 쪽의 회전수가 피구동축으로 전달되는 양을 측정하여 연속가변 토크 제어 전달 기구의 성능을 확인하였다. 이 기구는 현재 1차적으로는 remote controller의 ch 3(ON/OFF제어 방식)에 연결하여 특정한 양의 토크를 전륜 쪽으로 보낼 수 있도록 구현이 가능하며, ch 2(PID제어 방식)에 연결하여 연속 가변 조절이 가능하도록 구현이 가능하다. 부가적으로 Arduino board를 내장하여 전후륜의 휠센서에서 입력되는 신호를 감지하여 자동적으로 전후륜에 배분되는 토크를 제어할 수 있도록 설계 중에 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.12 s.255
• /
• pp.1203-1210
• /
• 2006

The filmwise condensation heat transfer coefficients of R-134a on the horizontal copper and stainless steel tubes were measured and analyzed. The outside diameter of the tubes was 15.88 mm, and the tube thickness ranged from 0.89 to 1.65 mm. The polished stainless steel tube had an RMS surface roughness($R_q$) of 0.37 $\mu$m, and commercial stainless steel tubes had an surface roughness($R_q$) of 1.855 $\mu$m. The tests were conducted at the saturation temperatures of 20 and $30^{\circ}C$, and the liquid wall subcoolings from 0.4 to $2.1^{\circ}C$. The measured condensation heat transfer coefficients were significantly lower than the predicted data by the Nusselt analysis. This trend in the stainless steel tube was explained by the effects of thermal resistance of tube material and surface roughness. Based on the experimental data with respect to wall thickness and surface roughness, it was suggested that the existing correlation on external condensation should be modified by considering material and surface roughness factors. The revised correlation was developed by introducing the effects of wall thickness and surface roughness into the Nusselt equation. The average deviation of the revised correlation was 13.0 %.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.5
• /
• pp.231-238
• /
• 2017

HFO refrigerants have recently come to be regarded as promising alternatives to R134a for use in turbo chillers. This study provides results from experiments evaluating the film condensation heat transfer characteristics of HFO refrigerants R1234ze(E) and R1233zd(E) on smooth horizontal laboratory tubes. The experiments were conducted at a saturation vapor temperature of $38.0^{\circ}C$ with surface sub-cooling temperatures in the range of $3{\sim}15^{\circ}C$. We observe that the film condensation heat transfer coefficient decreases as surface sub-cooling temperatures increase. In the case of laboratory tubes with a diameter of 19.05 mm, the film condensation heat transfer coefficients of R1234ze(E) and R1233zd(E) were approximately 11% and 20% lower than those of R134a, respectively. Furthermore, our investigation of the effect of tube diameter on film condensation heat transfer coefficients, demonstrates an inverse relationship where the film condensation heat transfer coefficient increases as laboratory tube diameter decreases. We propose experimental correlations of Nusselt number for R1234ze(E) and R1233zd(E), which yield a ${\pm}20%$ error band.

• Conservation Science in Museum
• /
• v.16
• /
• pp.82-95
• /
• 2015

Old Monk by Yun Duseo is realized to use silver paper which is made of rarity material. This sudy investigates reason why silver, that is easily discoloration in environmental condition, is susceptible in present. The method was the surface treatment materials and the base fiber through direct observation, optical instruments and XRF analysis. Based on these results, reproducing experiment was conducted to research materials in paper of Old Monk and the surface treatment technique. The results, the paper was treated 'Dochim' with a mineral having polygonal crystals for improving smoothness and density. XRF analysis result showed high calcium content, therefore, the paper was not used silver, it guess pulverized shells of abalone or other types of shellfish. Accordingly, the research was narrowed down to shells with shiny, reflective surfaces which at the same time contain high amounts of calcium. A new experiment was conducted using unprocessed abalone shells. Through the reproducing experiment, shellfish has high possibility as used mineral in paper. Notwithstanding, this experiment was unable to precisely reproduce the smoothness and shine of the original paper. Further research may therefore be needed.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.389-398
• /
• 2000

Transparent, abrasion resistant coatings with 4~13 ${\mu}{\textrm}{m}$ thickness were prepared by spin-coating on polycarbonates with organic/inorganic hybrid solutions, followed by UV curing and heat treatment at 12$0^{\circ}C$ for 12 hours. The coating solutions were composed of inorganic phase and organic phase in 0:100, 20:80, 30:70, 50:50, 80:20 wt% ratios, respectively, mixed with photoinitiator, senaitizer and surfactant. The inorganic phase was formed by sol-gel reaction of TEOS and silane coupling agent MPTMS in 1 : 2 or 2 : 1 molar ratios, the organic phase consisted of difunctional urethane acrylate oligomeric resin, multifunctional acrylate TMPTA and HDDA in 4 : 3 : 3 wt% ratio. The coating systems were investigated by FT-IR, $^{29}$ Si-NMR spectra. In addition, TGA/DSC for thermal analysis and SEM, AFM observation for coated surface were examined. Gererally, the homogeneity of phases, the surface smoothness of coating and abrasion resistance were improved with the higher content of inorganic component. Namely, coating system with below 10 $\AA$ surface roughness and T$_{g}$ of 15$0^{\circ}C$ showed only 10% decrease in light transmittance after abrasion test, whereas uncoated polycarbonate substrate exhibited 46% decrease..

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.6 s.28
• /
• pp.160-170
• /
• 2005

Because designers want to express various elevation, architectural concrete has recently paid attention to finish material and has increasingly used in the construction. architectural concrete needs more careful and professional supervision works such as controling quality of color, texture, construction plan, and design plan. none the less, It is not clear to define process and manage methods for the construction life-cycle, which causes the expense to increase and the quality to be poor. this study will analyze concrete finish method by dividing three parts which are common, exposed and architectural concrete finish method. definition and the limit of application in architectural concrete finish method will be present by comparing three methods. Throughout an interview with a staff in charge and a case study, this paper shows the requirement and the keynote of management which are divided by three steps; the design, construction and maintenance. finally, this research provides management methods of individual steps for effective construction.

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.115-119
• /
• 2013

Leiomyoma is benign neoplasm of smooth muscle, but it is rare in the oral cavity. The most common type of leiomyoma in the oral cavity is vascular leiomyoma. Clinically, vascular leiomyoma usually grows slowly and is generally a small, painless, sessile, firm and superficial nodule like lesion, and the length of time before patients seek medical attention may span months to years. The diagnosis of oral leiomyoma is possible with only histological studies with special stains because there are no specific clinical and radiological signs. We experienced a 53-year-old woman with palatal mass. She underwent surgical excision and the final pathological result confirmed it to be vascular leiomyoma. We report this case with a review of the related literatures.