• Journal of Chest Surgery
• /
• v.29 no.9
• /
• pp.1031-1035
• /
• 1996

International Ass ciation for the Study of Lung Cancer(IASLC) recommended the following classification of small cell lung carcinoma(SCLC) : (1) Small cell carcinoma (2) Mixed small cell/large cell carcinoma (3) Combined small cell carcinoma. Combined small cell carcinomas contain a squamous cell carcinoma or adenocarcinoma component. The prognostic significance of these elements is not known, but since the frequency and extent of non-small cell elements are considerably greater in posttherapy and autopsy tissues, it is possible that the non-SCLC elements are more resistant to therapy than the SCLC cells. Metaplasia & dysplasia of the bronchial surface epithelium are frequently observed in the bronchial biopsy specimens that contain small cell carcinoma of the lung. We report a case of combined small cell carcinoma with squamous element associated with microinvasive squamous cell carcinoma of the bronchial surface epithelium in 68 year old male patient, stage was IIIa. The two lesion are not connected n serial sections.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.341-353
• /
• 1995

Previous study had shown the diversities in the propriety for optimal bond strength on the concentration of the etchant. The aim of present study in vitro was to evaluate and compare the shear bond strength of orthodontic brackets to enamel and to measure the depth of etch on the phosphoric acid concentrations. A hundred and seventy six extracted bovine lower centrals were ground to yield flat surfaces and etched by the concentration $0%,\;5%,\;10%,\;20%,\;30%,\;40%,\;50%,\;60%,\;70%,\;80%\;and\;85\%$ of phosphoric acid respectively during 60 seconds. The shear bond strength of orthodontic brackets, the depth of etch and surface roughness of the enamel were measured, and scanning electron microscopic observations on the etched enamel surfaces were carried out. The data obtained from the very experiments were processed and statistically analyzed and evaluated. The gradual increase in the depth of etch to enamel as the accretion of the concentration of the phosphoric acid upto $40-50\%$ and decline henceforth were manifested. The surface roughness showed no correlation with the depth of etch, yet moderate correlation with the shear bond strength of brackets. Scanning electron microscopic investigation revealed that morphological patterns of the etched enamel surfaces for $5\%\;to\;40\%$ of concentrations were even and homogenous, and those for $50\%$ as well as $60\%$ exhibited the overetched and unhomogenous. The shear bond strengths kom $10\%\;to\;60\%$ of concentration showed no statistically significant differences. It was suggested that the shear bond strengths at $5\%\;and\;70\%$ were sufficient to tolerate the force levels of the ordinary orthodontic treatment notwithstanding to be significantly lower than those from $10\%\;to\;60\%$ phosphoric acid solution.

• Journal of Veterinary Clinics
• /
• v.30 no.5
• /
• pp.399-402
• /
• 2013

An 8-year-old, female, mixed Thoroughbred horse was presented for the evaluation of the left upper eyelid mass with ocular discharge during 4 months. After unilateral surgery, excised eyelid mass and left eye were submitted for diagnosis. Grossly, the removed mass was $6{\times}7{\times}2$ cm in size and dome shape with rough irregular surface. On the cut surface, mass was firm and yellowish white in color. Histopathologically, severely proliferated stratified squamous epithelia were heavily invaginated into dermis, and then formed rete ridge or numerous squamous islands. These neoplastic islands were composed of multiple layers of prickle cells with intercellular bridge and central laminated keratin pearls or necrotic cellular debris. Based on the above results, this case was diagnosed as squamous cell carcinoma in upper eyelid of horse.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.159-159
• /
• 2011

최근 여러 화학 반응에 대해서 일층(1L) 그래핀(graphene)이 복층(multi-layered) 그래핀보다 10 배 이상의 높은 반응성을 보인다는 사실이 알려졌다. 본 실험에서는 기판의 편평도와 기판-그래핀 간의 상호작용이 그래핀의 반응성에 미치는 영향을 이해하기 위해서, AFM(atomic force microscopy)과 라만 분광법을 이용하여 그래핀의 기체상 고온 산화반응을 연구하였다. 기계적 박리법을 통해 산화실리콘(SiO2/Si)과 마이카(mica) 기판 위에 고착된 그래핀 시료를 대조군으로 비교하였다. AFM 형상 분석으로부터 편평도가 낮은 산화실리콘 위에서는 그래핀의 두께가 작을수록 산화 속도가 크다는 사실을 확인하였다. 그러나 편평도가 높은 마이카 기판 위에서는 단일층 그래핀의 산화 속도가 산화실리콘 기판 위에서보다 현저하게 감소하고 두 겹 이상의 두께에서는 반응성의 차이가 없음을 발견하였다. 특히 마이카 위의 단일층 그래핀에서는 복층 그래핀과는 달리 산화에 의한 식각이 거의 일어나지 않아 화학적 안정성이 증대되었음을 알 수 있었다. 본 연구는 기판의 표면구조와 상호 작용을 통해 그래핀의 화학적 특성을 조절 할 수 있다는 가능성을 보여 준다.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.107-114
• /
• 1996

A series of shear tests is performed to measure friction coefficients of the interface between different reinforcements and weathered granite soils. The reinforcements tested are smooth steel strip, Paraweb(friction tie) and geotextile with rough surface, while the weathered granite soils are composed of different, grain size distribution. Soils are compacted with the energy of 95% modified AASHTO and fully saturated before testing to simulate the worst site condition. Because of characteristics of the direct shear apparatus, shear strength is obtained in terms of drained condition. Test results show that the more fines the soils contain, the larger ratio of friction coefficient ($\mu=\frac{tan{\delta}}{tan{\Psi}}$) is obtained. Also the ratios are much higher for the Friction tie and the geotextile compared to the smooth steel strip. Those suggest that even weathered granite soils with 36% fines are possible to use as backfill of reinforced earth structures for the two reinforcements when a drainage system is provided.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.207-211
• /
• 2003

In this study, the geometric modeling has been conducted for a new model of 12 inch hot-cold chuck using three-dimensional solid modeler, SolidWorks. Then, the heat transfer analysis and the thermal deformation analysis using FEM have been performed. The results of the analysis show the temperature distribution and the deformed shape of a new model of 12 inch hot-cold chuck. The evaluation for the surface flatness of a new model has been performed based on the deformed shape obtained from ANSYS.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.53-59
• /
• 2009

The purpose of this research is particle shape evaluation of granular soil and aggregate using Digital Image Process(DIP). DIP is very useful to measure the roughness and particle shape of aggregates. Couple of aggregates, like standard sand, two different crushed stones, and two different marine aggregates, have been employed. Shape factor of two different marine aggregates is ranged 0.35 to 0.54. Crushed stone I is that of 0.74 which is highly flat, but standard sand is elongated shape. Especially, two marine aggregate showed a big difference of width and length which meaned a long shape. There is any significant difference of elongation ratio and flakiness for each aggregate with different measuring system, like direct measurement of vernier calipers and DIP method. Within the limited test results, DIP is one of useful to get the particle shape of aggregate with limitation of measuring errors and to apply the particle distribution curve.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.209-210
• /
• 2014

질염 환자의 Pap. 염색 도말 표본에서 실마리세포(clue cell)는 쉽게 관찰되었으며 이들 세포 주변에서 젖산균(lactobacilli)은 확인되지 않았다. 주사전자현미경상에서 편평상피세포(squamous epithelial cell) 표면을 덮고 있는 Gardnerella vaginalis들은 biofilm을 형성하고 있었다. 무정형의 biofilm 물질은 세균 표면을 매끄럽게 덮고 있거나 세균과 세균 사이를 연결시켜주고 있었다. Gardnerella vaginalis는 구균과 간균의 형태로 직경이 약 $0.3{\mu}m-0.6{\mu}m$ 크기로 다양하였으며 세포벽 표면에는 작은 돌출된 물질들에 의해서 피복되어 있고, 일부 세균들은 분열양상을 나타냈다.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.69-78
• /
• 2011

The purpose of this research is particle shape evaluation of aggregate using Digital Image Process(DIP). DIP is very useful to measure the roughness and particle shape of aggregates. Couple of aggregates, like standard sand, two different crushed stones, and two different marine aggregates, have been employed. Shape factors of two different marine aggregates are ranged 0.35 to 0.54. Crushed stone I is 0.74 which is highly flat, but standard sand is elongated shape. Especially, two marine aggregate showed a big difference of width and length which meaned a long shape. There is any significant difference of elongation ratio and flatness for each aggregate with different measuring system, like direct measurement of vernier calipers and DIP method. Shape conversion coefficient and equivalent diameter for changing 2D image to 3D image by the Digital Image Process(DIP) have been suggested and modified particle size distribution curve has been showed. The measured flatness ratios of each aggregate were 0.30, 0.36, 0.47 and 0.83, respectively. Also, the conversion shape coefficients of each aggregate were determinded as 0.77, 0.78, 0.84 and 0.92. The size of aggregate has been modified by multiplying the shape conversion coefficient and the aggregate size from DIP. The modified gradation curve with modified volume and weight of aggregate has been suggested. Within the limited test results, DIP is one of useful to get the particle shape of aggregate with limitation of measuring errors and to apply the particle distribution curve.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.488-500
• /
• 1987

The improvement of surface roughness of machined cylindrical rods through the plastic polishing process was studied in this paper. The criterion and limits for the plastic polishing process due to the wave motion of the ridge were established with respect to process variables: ridge shape and size, semi-cone die angle as well as friction factor, by the application of the upper-bound approach. The surface roughness of the plastic polished products was measured, and compared with that of the original specimen. Also the depth of the surface deformation layer was tested, and compared those of the theoretical values. Qualitative agreement exists between the experimental plastic polishing loads and theoretical loads. The wave motion of the ridge was mostly occurred within the established limits. The surface roughness of specimens was sufficiently improved through the present process. Also the predicted depth of the surface deformation layer was in good agreement with experimental results.