• Journal of the Korean Society of Radiology
• /
• v.8 no.5
• /
• pp.265-269
• /
• 2014

The therapy of total body irradiation on leukemia carries out to kill harmful bacteria or suppression of immune system by external beam therapy, which is a preparatory stage to reconstitute bone marrow before a pre-treatment of bone marrow transplantation to patients with health bone marrow cells. In case of this kind of radiation therapy, the spoiler use to increase surface dose of patient which varies depending on distance and thickness between patient and spoiler. In this study, the change was investigated the surface dose according to thickness of spoiler. The 0.5% increase of surface dose was observed with each 2.0 cm when the spioler in acrylic was prepared from 0.5 cm to 3.0 cm at intervals of 0.5 cm was evaluated. Based on this result, it suggests that this kind of application will be somewhat limited on clinical trials directly but proper surface dose can be useful method when is applied on patients of treatment prognosis who are required each different surface dose.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.531-536
• /
• 2004

Synthesis conditions were optimized using response surface methodology for producing structured lipids (SL) by interesterification of DHA-enriched algae oil derived from microalgae, Schizochytrium sp. and corn oil. Reaction was performed fer 24 hr at $55^{\circ}C$ catalyzed by immobilized lipase from Rhizomucor miehei (RM IM) in shaking water bath. Major fatty acids of SL were palmitic (21.70 mol%), oleic (20.20 mol%), and linoleic (27.34 mol%) acids, and DHA (15.06 mol%). To separate newly synthesized SL-triglycerides (TG) species, HPLC with evaporative light scatting detector (ELSD) was used. Production conditions were optimized using central composite design with reaction temperature $(35-75^{\circ}C,\;X_1)$, reaction time $(2-42\;hr,\;X_2)$, and enzyme concentration $(2-14%,\;X_3)$ as variables. When variables were $70.28^{\circ}C\;(X_1),\;28.74\;hr\;(X_2),\;and\;11.30%\;(X_3)$, maximum content of selected three peaks of synthesized SL-TG species was predicted as 6.97 area%.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.219-223
• /
• 2003

Response surface methodology was used for monitoring and optimizing the extraction conditions of campesterol, stigmasterol, ${\beta}$ -sitosterol, and total sterols from the safflower seed. The conditions of phytosterol extraction were optimized by using central composite design with the temperature(35∼75$^{\circ}C$, X$_1$), the time (1∼11hr, X$_2$), and the preheating temperature(60∼100$^{\circ}C$, X$_3$) as three variables. The extraction conditions for maximum campesterol content were 59.01$^{\circ}C$(X$_1$), 2.88hr(X$_2$), and 75.04$^{\circ}C$(X$_3$). But stigmasterol, ${\beta}$ -sitosterol and total sterols were not significantly different under designed extraction condition in this study. Besides, oil was extracted from safflower seed at various conditions and yields were 23.44% at 35$^{\circ}C$ and 20.05% at 80$^{\circ}C$, respectively. Total tocopherol content increased from 0.172% to 0.207% as the extraction temperature increased from 35$^{\circ}C$ to 80$^{\circ}C$. A structured lipids(SL) was synthesized enzymatically by extracted safflower oil and conjugated linoleic acid(CLA). After 24hr reaction, 31.79 mol% CLA was incorporated into the extracted safflower oil.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.253-258
• /
• 2013

The purpose of this study is to evaluate and analyze the relationship between the external radiation dose reconstruction which is transmitted from the patient who receives radiation treatment through electronic portal imaging device (EPID) and the internal dose derived from the Monte Carlo simulation. As a comparative analysis of the two cases, it is performed to provide a basic indicator for similar studies. The geometric information of the experiment and that of the radiation source were entered into Monte Carlo n-particle (MCNPX) which is the computer simulation tool and to derive the EPID images, a tally card in MCNPX was used for visualizing and the imaging of the dose information. We set to source to surface distance (SSD) 100 cm for internal measurement and EPID. And the water phantom was set to be 100 cm of the source to surface distance (SSD) for the internal measurement and EPID was set to 90 cm of SSD which is 10 cm below. The internal dose was collected from the water phantom by using mesh tally function in MCNPX, accumulated dose data was acquired by four-portal beam exposures. At the same time, after getting the dose which had been passed through water phantom, dose reconstruction was performed using back-projection method. In order to analyze about two cases, we compared the penetrated dose by calibration of itself with the absorbed one. We also evaluated the reconstructed dose using EPID and partially accumulated (overlapped) dose in water phantom by four-portal beam exposures. The sum dose data of two cases were calculated as each 3.4580 MeV/g (absorbed dose in water) and 3.4354 MeV/g (EPID reconstruction). The result of sum dose match from two cases shows good agreement with 0.6536% dose error.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.111-118
• /
• 2019

Chest digital tomosynthesis has become a practical imaging modality because it can solve the problem of anatomy overlapping in conventional chest radiography. However, because of both limited scan angle and finite-size detector, a portion of chest cannot be represented in some or all of the projection. These bring a discontinuity in intensity across the field of view boundaries in the reconstructed slices, which we refer to as the truncation artifacts. The purpose of this study was to reduce truncation artifacts using a weighted normalization approach and to investigate the performance of this approach for our prototype chest digital tomosynthesis system. The system source-to-image distance was 1100 mm, and the center of rotation of X-ray source was located on 100 mm above the detector surface. After obtaining 41 projection views with ${\pm}20^{\circ}$ degrees, tomosynthesis slices were reconstructed with the filtered back projection algorithm. For quantitative evaluation, peak signal to noise ratio and structure similarity index values were evaluated after reconstructing reference image using simulation, and mean value of specific direction values was evaluated using real data. Simulation results showed that the peak signal to noise ratio and structure similarity index was improved respectively. In the case of the experimental results showed that the effect of artifact in the mean value of specific direction of the reconstructed image was reduced. In conclusion, the weighted normalization method improves the quality of image by reducing truncation artifacts. These results suggested that weighted normalization method could improve the image quality of chest digital tomosynthesis.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.3
• /
• pp.11-17
• /
• 2008

Many methods which represent complex surfaces using height map without a number of vertex have been researched. However, a single layer height map cannot present more complex objects because it has only one height value on each position. In this paper, we introduce the new approach to render more complex objects, which are not generated by single layer height map, using multi layer height map. We store height values of the scene to each texture channel by the ascending order. A pair of ordered height values composes a geometry block and we use this property. For accurate ray search, we store the highest value in odd channels and the lowest value in even channels to generate quad tree height map. Our ray search algorithm shows accurate intersections between viewing ray and height values using quad tree height map. We solve aliasing problems on grazing angles occurred in previous methods and render the result scene on real-time.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.4
• /
• pp.273-280
• /
• 2012

The numerical simulation using the Lattice Boltzmann Method in the field of computational fluid dynamics becomes wider in the engineering applications because of its simplicity of update rules compared to the conventional Navier-Stokes solvers. Here, a two-dimensional D2Q9 LB model is numerically tested with a few new computational treatment on the free surface. The single relaxation time is applied under the gravitational field where applied only in the higher density fluid because of its big density difference. At the free surface, the reconstruction techniques in combination with boundary conditions is adopted in order to get some distribution function coming into the fluid site from the air one, and surface tension, early stable test for the gravitional field is considered in it. With the implementation of the gravitational profile, conserving the overall mass and grid dependency are observed during the calculations and freesurface advance track is well captured with an experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2011-2018
• /
• 2011

The paper demonstrates how to deal with the Near-field Acoustic Holography method (NAH) for reducing noise source which is generated in air-conditioning compressor. Sound radiation was measured for both normal compressor and fault compressor. The acoustic noise holograms are predicted by measuring at discrete multiple points around the two compressors and are thereafter reconstructed on the surface of the compressors. 1344 measuring points are used by two microphones in which one is scanning microphone and the other is reference microphone. NAH is a good tool for the visualization of Sound so we can show the source of sound graphically. In this paper, the NAH method found the exact noise source position on the surface of the compressor and the noise-related sub part in the compressor. We found the NAH and is very useful as a noise reduction tool for home-appliance device.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.455-463
• /
• 2018

This study developed a method to quantitatively measure the size of cracks in concrete using X-ray CT images. We prepared samples with a diameter of 50 mm and a length of 100 mm by coring cracked concrete block that was obtained by chipping. We used a micro-focus X-ray CT, then applied the 3DMA method (3 Dimensional Medial axis Analysis) to the 3D CT images to find effective parameters for damage assessment. Finally, we quantitatively assessed the damage based on sample locations, using the damage assessment parameter. Results clearly show that the area near the chipping surface was damaged to a depth of 3 cm. Furthermore, X-ray methods can be used to evaluate the porosity index, burn number, and medial axis, which are used to estimate the damage to the area near the chipping surface.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.816-821
• /
• 2009

In this paper, I would like to talk about a step by step detailed information browsing which is founded on hierarchical structure for offering suitable information about the mass 3D data of a national treasure building to user as a standard of the visual distance. A step by step detailed information of the national treasure building of gigantic proportions offers a process of detailed information browsing which decided suitable hierarchical structure as considering of the preprocessing procedure which produces hierarchical structure and a visual distance of user. In the preprocessing procedure, 3D data is divided and controlled by optimized spacial structures. The relevance connection between the inner spacial surface is then examined and reconfigured in order to prevent holes or distortions. Finally, relative information data is created. In detailed information browsing, by examining the visual distance between model and user, then by browsing proper step of data, suitable level model data can be provided to the users in accordance with the position of observation.