• Journal of Gastric Cancer
• /
• v.6 no.3
• /
• pp.161-166
• /
• 2006

Purpose: Recently, the incidence of early gastric cancer (EGC) patients is rapidly increased in Korea. However, they're often not perceptible by surgical palpation or inspection. The aim of this study is 1) to develope a software that can locate the tumor and measure the mucosal distance from an anatomic landmark to the tumor using CT gastrography and 2) to compare the distance measured by the developed software with the distance measured by the pathologic findings. Materials and Methods: Between January 2004 and September 2005, sixty patients (male=45, female=15, mean 57.8 years old) estimated for EGC with preoperative CT scans and undergone gastrectomies in Kyungpook National University Hospital were enrolled in this study. Preoperative CT scans were performed after insufflations of room air via 5 Fr NG tube. The scans included the following parameters: (slice thickness/reconstruction interval: 0.625 mm, kVp: 120, mAs: 200). 3D volume rendering and measurement of the surface distance from the pylorus to the EGC were performed using the developed software. Results: The average difference between the lesion to pylorus distances measured from pathologic specimens and CT gastrography was $5.3{\pm}2.9\;mm(range,\;0{\sim}23\;mm)$. The lesion to pylorus distance measured from CT gastrography was well correlated with that measured from the pathologic specimens (r=0.9843, P<0.001). Conclusion: These results suggest that the surface distance from an anatomic landmark to the EGC can be measured accurately by CT gastrography. This technique could be used for preoperative localization of early gastric carcinomas to determine the optimal extent of surgical resection.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.367-377
• /
• 2018

This study introduces a DC resistivity inversion method that incorporates structural and inequality constraints to enhance the resolution of resistivity inversions, and presents sample inversion results with these constraints. In the constrained inversions, a base model is constructed from a layered model through interpretation of other geophysical data. Inversion tests establish that both the structural and inequality constraints produce better resistivity models than the unconstrained inversion. However, the inequality inversion not only reproduces the exact layered structure of the background, it reproduces conductive anomalies at a depth of ~ 10 m when an inexact base model of electrical resistivity is used.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.140-147
• /
• 2009

The narrative in the post modern age specially changed the relationship between the writer and the audience. There has been discussions in digital story telling on the format where the audience directly get involved in the plot and change it. However, relevant research has a problem that makes it hard to be applied to unilateral narrative analysis. However, in this context, Save the Green Planet utilizes the narrative that emphasizes the role of the audience while keeping the media characteristics of the movie. Save the Green Planet is read in a monophonic manner by the audience. The audience is led, through different voices provided by the movie, to create another plot that is restructured by themselves other than the explicit plot. This paper aims to examine how the elements constituting the narrative of Save the Green Planet restructure a new plot, and examine the restructured narrative between the interaction of the two plots.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.436-443
• /
• 1999

Most of the 3D object reconstruction techniques divide the object into multiplane and approximate the surfaces of the object. The Marching Cubes Algorithm which initializes the mesh structure using a given isovalue. and Delaunay Tetrahedrisation are widely used. Deformable models are well-suited for general object reconstruction because they make little assumptions about the shape to recover and they can reconstruct objects *om various types of datasets. Now, many researchers are studying the reconstruction systems based on a deformable model. In this paper, we propose a novel method for reconstruction of 3D objects. This method, for a 3D object composed of curved planes, compresses the 3D object based on the adaptive simplexmesh technique. It changes the pre-defined mesh structure, so that it may approach to the original object. Also, we redefine the geometric characteristics such as curvatures. As results of simulations, we show reconstruction of the original object with high compression and concentration of vertices towards parts of high curvature in order to optimize the shape description.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2011

Carbon board, an electromagnetic shielding new material, is expected to be applied to the art wall by combining draft designs. When environment-friendly architecture materials are used as an interior wall, they are suitable as finishing materials. According to the increasing tendency of the application of carbon board, various styles could be made by decorating the whole or a part of a wall with tiles with module structure or by patterning the wall with panel-type woodcut or pictures or sculpture. And more graphic design based on diverse variation, and reconstruction and combination between other motif is being on the rise as a new expression. In this paper, make it possible to applying in MDF board and carbon board pattern design using the woodcut technique. The structural and physical properties were compared by usability of abrasion, toughness, stability. Samples are analyzed dependent on the hardness and relative density, change of detail pattern design and trimming technique. These results have shown that the possibility of applying of carbon board can be a high rank interior materials, capable of creating value of the living system, connects with MDF board, also can express humanism in a beautiful manner.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.1
• /
• pp.27-32
• /
• 2008

Purpose : We developed a 3D CSI (chemical shift imaging) sequence that uses the PRESS (point resolved spectroscopy) excitation scheme and spiral-based readout gradients. Materials and Methods : We implemented constant-density spirals ($32{\times}32$ matrix, $24{\times}24\;cm$ FOV) which use analytic equations to enable real-time prescription on the scanner. In-vivo data from the brain were collected and reconstructed using the gridding algorithm. Results : Data illustrate that with our imaging sequence, the benefits of the PRESS technique, which include elimination of lipid artifacts, remain intact while flexible scan time versus resolution tradeoffs can be achieved using the constant-density spirals. Volumetric high resolution 3D CSI covering 5760 cm3 could be obtained in 12.5 minutes. Conclusion : Spiral-based readout gradients offer a flexible tradeoff between scan time versus resolution. By combining this feature with PRESS based excitation, efficient methods of volumetric spectroscopic imaging can be accomplished by obtaining whole brain coverage while eliminating lipid contamination.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.136-142
• /
• 1994

Epitaxial TiSiz films have been grown by UHV deposition of Ti on atomically clean Si(ll1)- orientated substrates. The Ti film of 50$\AA$ was deposited on the reconstructed Si(ll1) surface at room temperature. The sample was annealed up to $800^{\circ}C$ in $100^{\circ}C$ increments. The structure of the TiSiL films have been identified as the C49 metastable phase by electron diffraction patterns. Scanning electron microscopy( SEM) shows three different types of Tiksilicide island morphologies. The individual island structures are single crystal and are considered to be epitaxy with different crystallographic orientations. The orientational relationships of the $TiSi_{2}$ islands is given by [ 172 1 C49 $TiSi_{2}$//[110] Si and (021) C49 $TiSi_{2}$// (111)Si.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.127-135
• /
• 2015

In this research, we conducted an experiment on evaluating the extending depth information method and surface reconstruction method and the interaction of these two methods in order to enhance the final intermediate view images, which are acquired using DIBR (Depth-Image-Based Rendering) method. We evaluated the experimental control groups using the Microsoft's "Ballet" and "Break Dancer" data sets with three different hole-filling algorithms. The result revealed that the quality was improved the most by applying both extending depth information and surface reconstruction method as compared to the previous point clouds only. In addition, it found that the quality of the intermediate images was improved vastly by only applying extending depth information when using no hole-filling algorithm.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.426-433
• /
• 2002

In this paper, we have studied the images which have been reconstructed by using combination of images acquired by the variation of operating frequency. When inner images have been reconstructed, they have been superposed by the surface state effect. In this case, the images of the phase object can be enhanced by the contrast of inner images. In this experiment, there are two kinds of specimens, one is a reference block haying 1/4T, 1/2T, 3/4T side drilled holes as main run piping material 111 the steam generator in NPP(Neuclear Power Plant)s and the another is a part of a hemisphere type specimen having about 1-2㎜ distance gap. It has been shown that the two results of defect shapes have better than before in this processing and phase contrast grow about twice. And we have constructed the acoustic microscope by using a quadrature detector that enables to acquire the amplitude and phase of the reflected signal simultaneously Further more ore have studied the reconstruction method of the amplitude and phase images and the enhancement method of the defect images contrast.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.3
• /
• pp.93-103
• /
• 2023

The problem of reconstructing three-dimensional models of people and objects from color and depth images captured by low-cost RGB-D cameras has long been an active research area in computer graphics. Color and depth images captured by low-cost RGB-D cameras are represented as point clouds in three-dimensional space, which correspond to discrete values in a continuous three-dimensional space and require additional surface reconstruction compared to rendering using polygonal models. In this paper, we propose an effective ray-tracing based technique for visualizing point clouds rather than polygonal models. In particular, our method shows the possibility of an effective rendering method even in mobile environment which has limited performance due to processor heat and lack of battery.