• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.254-257
• /
• 2017

As a part of the development of aircraft gas turbines, combustion performance tests have been conducted in the single combustor sector. The effects of change in the amount of air supplied to the main combustion zone to the performance of the combustor, such as a pollutant emission, a liner temperature distribution and an exit temperature patterns, were studied. Emissions of CO and NOx increased with the main air-ratio and exit temperature pattern was improved. When changing the pattern of the dilution holes, it was shown that the temperature patterns on the exit plane of the combustor and the surface of liner changed depending on the main flame structure and mixing with diluent air. These observations will be applied to combustor liner designs to improve combustor durability and emissions reduction performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.5
• /
• pp.51-59
• /
• 2007

The end-burning combustion field using impinging oxidizer injectors are analyzed with tangential type injectors in order to examine their mixing and combustion characteristics. The impinging type showed further improved mixing effect as well as the combustion efficiency compared to the previously studied tangential injector. A novel injector capable of delivering impinging and swirl effect is introduced in this study where it demonstrated that the grain coning effect can be avoided. It was found that the combined impinging and swirling flow would promote the radial mixing rate increasing the residence time and the turbulent intensity. However, the use of the step combustor which may augment the turbulent intensity did not show any notable difference compared to the basic combustor.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.204-206
• /
• 2014

석탄 화력발전소에는 연소가스의 질소산화물(NOx) 저감을 위한 SCR(selective catalytic reduction)설비가 운전되고 있으며, SCR은 환원제인 암모니아($NH_3$)를 이용하여 연소가스 내에 질소산화물을 물과 질소로 분해하는 역할을 한다. 그러나, 연소가스 중의 일부 삼산화황($SO_3$)과 미반응 암모니아가 결합하여 황산암모늄염(Ammonium bisulfate; $NH_4HSO_4$)을 생성하며, 이는 후단 APH(air preheater)의 열소자에 점착된 후 분진들과 함께 성장하여 막힘을 야기한다. 막힘이 발생된 APH는 연소가스의 흐름을 방해하기 때문에 차압을 증가시키며, 이는 발전효율의 감소뿐만 아니라 급전정지를 초래한다. 이를 해결하기 위하여 $CO_2$ 드라이아이스 세정 방법을 적용하였으며, pilot-scale plant에서 실험을 수행하였다. 또한, 드라이아이스 공정변수인 분사압력과 분사시간을 제어하여 pilot-scale plant의 APH 열소자 표면에 생성되어있는 오염물질들의 제거효율을 관찰한 결과 95 %의 높은 제거효율을 보였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.103-115
• /
• 2013

Durability testing method trends of the thermal barrier coating(TBC) for the combustion chamber of the liquid-propellant rocket engine have been investigated. Many types of the durability testing method such as the mechanical tests to measure surface cohesion force, the thermal fatigue tests with laser, furnace, burner or plasma, the small scale combustion tests using injectors, and the thermo-mechanical fatigue tests were observed. The TBC with sufficient durability can be selected for the use of combustion chamber through such specimen-level tests and the durability can be verified by the tests using the real scale combustion chambers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.603-615
• /
• 2012

Durability testing method trends of the thermal barrier coating(TBC) for the combustion chamber of the liquid-propellant rocket engine has been investigated. Many types of the durability testing method such as the mechanical tests to measure surface cohesion force, the thermal fatigue tests with laser, furnace, burner or plasma, the small scale combustion tests using injectors, and the thermo-mechanical fatigue tests were observed. The TBC with sufficient durability can be selected for the use of combustion chamber through such specimen-level tests and the durability can be verified by the tests using the real scale combustion chambers.

• Journal of the KSME
• /
• v.56 no.9
• /
• pp.38-43
• /
• 2016

초임계 난류유동이 활용되고 있는 가장 대표적인 시스템은 액체로켓연소기이다. 액체로켓엔진은 목적하는 임무에 따라 추력이 결정되고 엔진의 추력이 결정된다. 이러한 추력을 결정하는 핵심부품이 분사기(injector)이다. 실용 인공위성을 발사하기 위한 액체로켓엔진의 연소기는 수백 개의 분사기를 통해 연료와 산화제가 혼합되는 구조를 가지고 있다. 따라서 로켓연소기의 연소특성 및 성능은 분사기의 혼합특성에 좌우된다. 그러므로 단일 분사기의 연료/산화제 혼합특성에 대한 많은 실험과 해석연구가 진행되고 있다. 그런데 초임계압력에서는 액체의 표면장력이 사라지게 되어 독특한 혼합특성을 가지고 있기 때문에 성능을 높여주기 위하여 초임계 압력을 선택할 경우 분사기에 대한 연구가 선행되어야 한다. 이 글에서는 이러한 초임계 작동압력에서 분사기에 대한 연구들을 소개하고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.52-59
• /
• 2014

The effect of ceramic thermal barrier coating thickness on the cooling performance of a liquid-propellant rocket engine combustor has been investigated through combustion/cooling performance analysis whose results verified against measured data from hot-firing tests. Also have been confirmed the effects of film cooling amount near the face plate on the coolant temperature and on the thermal barrier coating surface temperature. Some important points to be considered for designing cooling schemes for regeneratively cooled rocket engine combustor have been drawn and reviewed from present study and further verification of the analysis tool should be performed in the future.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.154-154
• /
• 2015

현재 액체로켓 엔진 연소기 내벽은 bonding layer NiCrAlY과 Top layer $ZrO_2$가 플라즈마 용사 방식으로 형성 된다. 이는 뛰어난 열 차폐 특성과 작업시간이 짧은 장점이 있지만, bonding layer와 Top layer 사이의 열팽창 계수 차이로 인한 균열 발생 가능성이 내재 되어 있고, 연소실 내벽에 균일한 두께의 코팅층을 형성하기 어렵고 설비가 비싸다는 단점으로 인하여 세라믹 코팅 층을 금속 코팅 층으로 대체 하고자 한다. 금속 코팅층은 모재와의 밀착성이 높고, 우수한 산화 및 부식방지 기능을 가지며 저렴하다는 장점이 있다. 또한 코팅 후 연마 작업이 가능해 연소실 내부형상을 설계조건 대로 유지 할 수 있는 특징이 있다. 따라서 본 연구에서는 연소실 내벽에 적용할 모재, 무전해 Ni-P 도금과 전해 Cr 도금층 사이의 밀착력 향상을 위한 방법에 대한 연구를 하였다. 밀착력 향상을 위한 요소로 전처리 용액과 열처리 시간에 따른 영향을 알아보고자 하였으며, 이를 위해서 5가지의 산세 용액으로 각 시편을 산세 한 후, 6시간, 12시간, 18시간 열처리 하여 단면을 비교하여 열처리에 영향을 알아보고자 하였다. 연구 결과 산세 용액의 영향은 크게 나타나지 않았으며, 열처리 시간이 길수록 Ni-P/Cr의 확산이 더 잘 일어나 확산층이 더 넓어지면서 밀착력이 더 좋아 진 것으로 판단되어 진다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1582-1590
• /
• 1998

Combustion-driven oscillations in a surface burner have been investigated to clarify their characteristics. A model combustor is made and the oscillation frequencies are measured for various dimensions of the combustor. It is found that there are two modes of oscillations; one is the 'acoustic mode' at high frequencies, associated with the acoustic mode of the combustion system and the other is the 'combustion mode' at low frequencies around 100 Hz, associated with the instability of the flame. Acoustic mode is excited when the surface burner is placed where the phase of particle velocity leads that of acoustic pressure by $90^{\circ}$, for all the combustion conditions. Combustion mode is driven at high combustion rate by the lift of unstable flame near the lower limit of the combustible equivalence ratio. Combustion mode is greatly influenced by the inlet temperature of the premixed gas. When the inlet temperature is very high, the combustion mode does not occur.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.138-143
• /
• 2009

Thermal barrier efficiency and endurance of coatings in liquid rocket engine combustor were evaluated for air plasma spray coating and electro/electroless plating. The result of firing tests has revealed occasional occurrence of local delamination of $ZrO_2$, NiCrAlY coating obtained by the method of air plasma spray in the region of supersonic flow and it necessitated a new coating method as a substitution. It was found that Ni-Cr coating by means of electro/electroless plating can substitute $ZrO_2$, NiCrAlY coatings of air plasma spray in terms of thermal barrier efficiency and endurance.