• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.61-62
• /
• 2008

Closed field unbalanced magnetron sputtering 방법을 이용하여 CrZr-Si-N 박막을 증착하였다. Si Target power의 변화에 따라 박막을 증착하여 XRD, SEM, XPS, GDOES, AFM, XPS, Nanoindentation을 이용하여 박막의 미세구조, 성분분석, 표면 조도, 경도를 측정하였다. $500^{\circ}C$에서 annealing한 후 상온에서의 박막의 경도와 비교하였고, 상온과 $500^{\circ}C$에서 마모 실험을 행한 후 마찰 계수를 측정하여 비교하였다. $Cr_{39.4}Zr_{12.3}N_{48.3}$ 박막은 $500^{\circ}C$ annealing 후 경도는 30 GPa에서 24 GPa로 감소하였고 마찰계수는 0.23에서 0.81로 약 4배 증가하였다. $500^{\circ}C$ annealing 후 $Cr_{34.6}Zr_{10.6}-Si_{6.4}-N_{48.4}$ 박막의 경도는 30 GPa로 상온에서의 경도 32 GPa과 비슷하였고 $500^{\circ}C$와 상온에서 수행된 마모시험 결과는 $500^{\circ}C$에서 마찰계수 0.43으로 상온 마모시험 결과와 거의 비슷한 결과를 보였다. 상온의 경우 Si 함량에 따른 기계적 특성 및 마모특성의 변화는 거의 없었다. 그러나 $500^{\circ}C$ annealing 후 CrZi-Si-N 박막의 기계적 특성 및 마모특성은 Si 함량에 따라 큰 차이를 나타내었다. 이러한 결과들을 통해 Si 첨가가 CrZrN 박막의 고온 안정성 향상에 기여함을 확인할 수 있었다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.11a
• /
• pp.67-74
• /
• 1988

고온성질 및 내마모 성질이 우수한 것으로 알려져 있는 요업재료가 아직 그 사용 영역이 크게 확장되지 못하고 있는 이유는 마모문제 때문이다. 종래 엔진재료로써 사용될 수 있을 것으로 크게 기대되어 왔던 사실과는 달리 아직도 성공하지 못하고 있는 것이 좋은 예이다. 이와 같이 요업재료에서의 마모가 중요한 문제로 대두함에 따라 최근 마모를 이해하기 위한 연구들이 실험적으로 또 이론적으로 활발히 진행되어 왔다. 그러나 마모는 접촉표면 및 부표면(subsurface)에서의 탄성 및 소성변형 또 화학적 반응등이 통상 복합적으로 작용하여 나타나는 매우 복잡한 것이기 때문에 아직도 그 기구는 분명하지 않다. 따라서, 요업재료에서 마모가 어떻게 일어나는 지를 밝히는 것은 아직도 매우 중요하다. 본 연구의 목적은 요업재료에서 미끄럼시의 마모기구를 실험적으로 밝히는 것이다. 비교적 제 성질이 잘알려져 있는 $Al_2O_3$를 모델계로 택하여 마모시험을 행하였으며, 미끄럼 시간에 따른 마모양상의 변화 및 접촉표면과 부표면에서의 미세구조 변화를 관찰하여 마모기구를 규명하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.192-192
• /
• 2013

하이브리드 표면처리는 다른 표면처리법을 동시 또는 연속적으로 행하여 단일표면처리에 비해 더욱 우수한 특성을 부여시키기 위한 표면처리법이다. 본 연구는 붕소와 질소 원소를 이용한 하이브리드 표면처리를 오스테나이트계 스테인리스강인 STS 316L 소재에 적용하여 변화된 특성을 평가하였다. 본 실험에 사용된 하이브리드 표면처리법으로는 붕소분말을 이용한 보로나이징처리와 활성스크린을 이용한 이온질화처리법을 적용하였다. 하이브리드 표면처리된 STS 316L시편은 FE-SEM을 이용하여 표면형상 및 단면조직을 관찰하였으며 GDS와 XRD를 이용하여 깊이에 따른 원소 및 상분석을 실시하였다. 또한 마이크로비커스 경도계와 마모시험기를 이용하여 경도와 마모특성을 측정하였고, 염수분무시험을 통하여 해수환경에서 부식거동을 평가하였다.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.93-101
• /
• 2011

The evaluation of various color coating methods for color maintenance of color asphalt pavement is conducted using the laboratory and field tests on the bus lane. The surface of color asphalt constructed on the bus lane is deteriorated such as changing color and decoloration and abrasion due to the passing of the traffic and time. The total of 9 coating methods were evaluated in this study. The laboratory tests included Ultra violet test, adhesion test and Taber abrasion test and the field tests were british pendulum test and visual survey. The results of tests showed that the different methods showed the their own engineering characteristics and it is dependant upon the main material used. The rubber epoxy material for the main material showed the satisfactory result among the methods tested. However, the performance of the coating methods after 100days are not satisfactory, decoloration, abrasion and peeling up are investigated and need to be studied for the further application in the field.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.70-77
• /
• 2011

A new piece of test equipment, the slurry wear tester (SWT), was proposed in this study to evaluate the wear behavior of rubber vulcanizate in environmental contact with slurry. Natural rubber (NR) and chloroprene rubber (CR) were chosen as the basic matrices to test the slurry wear. The fluids used to fill the chamber of the SWT were 35% HCl and NaCl solution. The Akron abrasion test was used for comparison with SWT. According to the results of the Akron abrasion test, CR vulcanizate abraded more rapidly than NR vulcanizate under same test condition. It was found that the hysteresis of rubber was key factor contribute to the wear behavior. However, the slurry wear rate of the NR and CR vulcanizates did not change significantly, even with changes in the concentration of acid and the immersion time in both HCl and NaCl solutions; the fluid decreased the friction between the abrasive paper and the specimen. It also reduced the heat generated from repeated deformation and wear debris at the surface of the SWT's abrasion arm. Thus, these phenomena affected the wear behavior of rubber vulcanizate and caused different results in the conventional Akron abrasion test. This outcome could have resulted in an incorrect analysis if the slurry wear behavior of the rubber vulcanizate was estimated by the conventional abrasion tests, which are operated under dry conditions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.113-114
• /
• 2012

본 연구는 segment target을 사용하여 unbalanced magnetron sputtering을 활용하여 고 CrZr-Si-N 박막을 합성하고 박막의 미세구조 및 마모 특성을 연구하는데 그 목적이 있다. 박막의 Si 함량을 조절하기 위하여 각 segment target은 Cr,Zr을 일정vol% 유지하며 Si vol%만 변화하여 설계하였다. Si 함량별로 제작된 마모실험 시편의 미세구조는 XRD, FE-SEM, AFM, TEM을 통하여 분석하였으며, ball on disk type의 마모 시험기를 통해 그 마모 특성을 분석하였으며,

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.41-44
• /
• 1996

고하중, 저속에서의 마찰마모특징을 나타내는 건설기계의 작업장치 연결부의 핀/부싱 조인트의 개발 적용성 검토를 위해 기존의 사용방법인 표면경화처리 후 그리이스 급유하는 경우와 ESA(전기방전코팅)처리후 고체윤활제를 도포한 경우의 마찰마모특징을 시험 분석하여 기존 방법보다 ESA처리후 고체윤활제를 도포하는 경우의 마찰마모 특성이 매우 우수한 적을 확인하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2002

When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at $37^{\circ}C$ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2 Hz on the MTS system. During the test, the following parameters were maintained: the lateral excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM observations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multiple comparison test were employed to detect statistically significant differences among the flowable composite resin groups and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.24-31
• /
• 2016

Purpose: Many studies have shown that airborne-particle abrasion of fiber post can improve the bonding strength to resin cement. But, airborne-particle abrasion may influence the property of fiber post. The purpose of this study is to evaluate the influence of airborne-particle abrasion on flexural strength of fiber post. Materials and Methods: Two fiber-reinforced posts; DT Light Post Size 2 (1.8 mm diameter, Bisco Inc) and RelyX Fiber Post Size 3 (1.9 mm diameter, 3M ESPE); were used in this study. Each group was divided into 3 subgroups according to different surface treatments; without pretreatment: $50{\mu}m$ aluminum oxide (Cobra$^{(R)}$, Renfert): and $30{\mu}m$ aluminum oxide modified with silica (Rocatec Soft$^{(R)}$, 3M ESPE). After airborne-particle abrasion procedure, three-point bending test was done to determine the flexural strength and flexural modulus. The diameter of each posts was measured to an accuracy of 0.01 mm using a digital micrometer. There was no diameter change before and after airborneparticle abrasion. The mean flexural moduli and flexural strengths calculated using the appropriate equations. The results were statistically analyzed using One-way ANOVA and Scheffe's post-hoc test at 95% confidencial level. Results: There was no significant difference on flexural strength between groups. Conclusion: In the limitation of this study, flexural strength and flexural modulus of fiber post are not affected by airborne-particle abrasion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1117-1123
• /
• 2014

This study sintered $Si_3N_4$ with different amounts of $SiO_2$ nano-colloid. The surface of a mirror-polished specimen was coated with $SiO_2$ nano-colloid, and cracks were healed when the specimen was treated at a temperature of 1273 K for 1 h in air. Wear specimen experiments were conducted after heat treatments for 10 min at 1073, 1273, and 1573 K. The heat-treated surface that was coated with the $SiO_2$ nano-colloid was slightly rougher than the noncoated surface. The oxidation state of the surface according to the heat treatment temperature showed no correlation with the surface roughness. Moreover, the friction coefficient, wear loss, and bending strength were not related to the surface roughness. $Si_3N_4$ exhibited an abrasive wear behavior when SKD11 was used as an opponent material. The friction coefficient was proportional to the wear loss, and the bending strength was inversely proportional to the friction coefficient and wear loss. The friction coefficient and wear loss increased with increasing amounts of the $SiO_2$ nanocolloid. In addition, the friction coefficient was slightly increased by increasing the heat treatment temperature.