• Proceedings of the Korean Fiber Society Conference
• /
• 1986.06a
• /
• pp.12-12
• /
• 1986

• Corrugated packaging logistics
• /
• no.48 s.11
• /
• pp.67-68
• /
• 2003

폴리아미드는 산 아미드결합(-CO-NH-)에 의해 구성되는 고분자화합물로 나일론으로 알려져 있다. 나일론은 미국 듀퐁사의 상품명인데 폴리아미드대신 사용되고 있다. 나일론6, 나일론66, 나일론610, 나일론11, 나일론12, 나일론46, 나일론MXD6등이 제조되고 있다. 이들 가운데 가장 많이 사용되고 있는 것이 나일론6, 나일론66이다.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.49-55
• /
• 2001

The bi-functional ion exchangers, SAPP-g-(AN/St) were synthesized with mixed vinyl monomers(acrylonitrile and styrene) onto PP fabric by the pre-irradiation grafting with E-beam and its subsequent amidoximination and sulfonation. The degree of grafting of PP-g-(AN/St) was increased with decreasing acrylonitrile composition in the mixed monomers. The water uptake of copolymers increased with decreasing in the amidoxime ratio in the copolymers and increased by sulfonation, but decreased by amidoximation. The $UO_2^{2+}$ adsorption capacity of SPP-g-St, APP-g-AN, and SAPP-g-(AN/St) were 12.4, 34.0, and 38.0 mg/g, respectively and the optimum adsorption time is about 50 hrs. As a result of uranium adsorption, the synthesized ion exchanger, which we obtained have also good affinity toward the adsorption or chelating with $UO_2^{2+}$ ions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.825-828
• /
• 1997

The market share of plastic fuel tube in automobile part is now growing rapidly. Especially fuel tube makers have had their efforts to develop tube module not only with dimensional accuracy, spring back and cost competitiveness. In this study, we used steam bending process for heat relaxation on PA12 plastic fuel tube's 128 types experimental bending conditions. we present the results of this process system in term of dimensional accuracy, and spring back.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.59-64
• /
• 1995

Two aromatic polysulfones, poly(PhC-co-SDA)-2 and poly(TPhC-co-SDA)-2, were synthesized by interfacial polycondensation of phthaoyl chloride(PhC) and terephthaloyl chloride(TPhC) with P, P'-sulfonyldianiline(SDA), respectively. The properties of the aromatic polysulfones synthesized were as follows : inherent viscosity, $0.32{\sim}0.35dL/g$:glass transition temperature, $220{\sim}240^{\circ}C$:tensile strength, $308{\sim}336Kg/cm^2$:and 5% weight loss temperature by TGA thermogram in the air, $500{\sim}530^{\circ}C$. As the result, thermal properties of the synthesized copolymers proved to be excellent.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.453-462
• /
• 2014

Thin film composite (TFC) polyamide (PA) membranes were prepared on polyester (PET) nonwoven reinforced polysulfone supports for forward osmosis (FO) processes. PSF (polysulfone) supports were prepared via the phase inversion process from PSF casting solutions in dimethyl formamide (DMF) solvents (19 wt%) by using a PET nonwoven (thickness of $100{\mu}m$) as a mechanical reinforcing material for reverse osmosis (RO) membrane. The PSF support from 19 wt% of DMF/PSF casting solution showed sponge-like morphology and asymmetric internal structure. To reduce the internal concentration polarization in FO operation, thin ($20{\mu}m$ of thickness) nonwoven-supported PSF supports were prepared by using PSF/DMF casting solution (9~19 wt%). A desirable support structure with a highly porous sponge-like morphology were achieved from the thin nonwoven-supported PSF layer prepared with 9~12 wt% casting solution. A crosslinked aromatic polyamide layer was fabricated on top of each support to form a TFC PA membrane. The tested sample from 12 wt% of DMF/PSF casting solution presented outstanding FO performance, almost 5.5 times higher water flux (24.3 LMH) with low reverse salt flux (RDF, 1.5 GMH) compared to a thick nonwoven rainforced membrane (4.5 LMH of flux and 3.47 GMH of RSF). By reducing the thickness of the nonwoven and optimizing PSF concentration of casting solution, the morphology of the prepared membranes were changed from a dense structure to a porous sponge structure in the boundary area between nonwoven and PET support layer.

• Korean Journal of Microbiology
• /
• v.30 no.4
• /
• pp.291-298
• /
• 1992

Srrepromycec. corlirolar produces at least 4 catalase activity bands with different electrophoretic mobilities on polyacrylamide gel which vary during development. Spores and mycelia at stationary phase produced all the activity bands(Cat1. 760 kr); Cat3-I, 170 kD: Cat3-2, 140 kD: Cat3-3. 130 kD; Cat4, 70 kD) except for Cat2 (300 kD). Mycelia at mid-logarithmic phase produced only Cat2 and Cat3-2 bands, and mycelia at late-logarithmic phase produced bands except Catl and Cat\ulcorner. Catalase-deficient mutants were screened in S. coelicalur by H201 bubbling test following NTG mutagenesis. Wc tested sevcral non-bubbling or slow-bubbling mutants for their catalase activities. The overall activities in cell extracts decreased more than 5 fold. Activity bands in native gel selectively decreased in intensity or disappeared. In all the non-bubbling mutants testcd, Cat3-2 band decreased significantly or disappeared. suggesting that Cat3-2 is the major catalase. The selective disappearance of bands in mutants suggest that each band is governed by different genes. We purified catalase activity from -:ell extracts obtained at late-logarithmic phase. Following chromatographies on Sepharose CL-4B. DEAE Sepharose CL-6B. Phcnyl Sepharose CL-4B. and hydroxylapatite columns. only the Cat3-2 activity was obtained. The native form of Cat3-2 has molecular weight of approximately 140 kD, judged by gel electrophoresis. Thc electrophoretic mobility on SDS-polyactylamide gel suggests that this enzyme contains 2 identical subunits of 67 kD.