• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1533-1542
• /
• 2021

Eco-friendly polyurethane can be defined as a highly utilized material used in various fields. The various structural properties of the synthesis of isocyanates and polyols provide versatility and customization for use in the manufacturing field. The characteristics of polyurethane vary widely from soft touch coatings to hard building materials like rocks. These mechanical, chemical and biological properties and ease of alignment are drawing tremendous attention not only in the field of research but also in related industries. In order to improve the performance of water-dispersible polyurethane materials, it can be derived through processes such as adjusting the blending of raw materials and adding additives and nanomaterials. This study highlights the basic chemical structure of eco-friendly water-dispersible polyurethane in the fields of medical science, automobiles, coatings, adhesives, paints, textiles, marine industries, wood composite materials, and clothing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.663-669
• /
• 2007

The solvent extracts of Sargassum muticum, which were extracted by using several solvents with different polarities, were prepared for use as natural preservatives. The S. muticum extract with 80% ethanol was sequentially fractionated with n.hexane, dichloromethane, ethylacetate, and butanol. In order to effectively screen for natural preservatives agents, we first investigated the antioxidant activities such as DPPH radical scavenging capacity, superoxide radical scavenging capacity, and xanthine oxidase inhibitory activity of the S. muticum extracts. Through the screening system, we found that dichloromethane and ethylacetate fraction had high antioxidant activity with increments of the extract concentration. The antimicrobial activities and cell growth inhibition were investigated for each strain with the different concentrations of S. muticum extracts. Antimicrobial activities were shown in ethanol, dichloromethane, and n.hexane fractions of S. muticum. However, butanol, ethylacetate and water fractions showed weak antimicrobial activity against the tested microorganisms. Among the five fractions, dichloromethane fraction showed the highest antimicrobial activities against microorganisms tested, such as Bacillus sublitis, Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, Salmonella Enteritidis and Pseudomonas aeruginosa. The polyphenolic compounds from ethanol, n.hexane, dichloromethane, ethylacetate, butanol, and water fractions were 63.96 mg/g, 8.49 mg/g, 28.11 mg/g, 172.64 mg/g, 114.56 mg/g, and 34.91 mg/g, respectively. The dichloromethane fraction could be suitable for development as a food preservative.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1106-1112
• /
• 2007

The solvent extracts of Euphorbia helioscopia, which were extracted by using several solvents with different polarities, were prepared for utility as natural preservatives. The E. helioscopia extract by 80% ethanol was sequentially fractionated with n-hexane, dichloromethane, ethylacetate, and butanol. In order to effectively screen for a natural preservatives agent, we first investigated the antioxidant activities such as DPPH radical scavenging capacity, superoxide radical scavenging capacity, and xanthine oxidase inhibitory activity of the E. helioscopia extracts. By the screening system, we found that ethylacetate fraction had the strongest antioxidant activity in a dose-dependent manner. The antimicrobial activities and cell growth inhibition were investigated for each strain with the different concentrations of E. helioscopia extracts. Antimicrobial activities were shown in ethylacetate fraction of E. helioscopia; however, ethanol, butanol and water fractions showed weak antimicrobial activity against the tested microorganisms. Among the five fractions, ethylacetate fraction showed the highest antimicrobial activities against microorganisms tested, such as Bacillus sublitis, Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Salmonella Enteritidis and Salmonella Typhimurium. The polyphenol content from ethanol, n-hexane, dichloromethane, ethylacetate, butanol, and water fractions were 207.46 mg/g, 45.45 mg/g, 138.23 mg/g, 678.02 mg/g, 278.91 mg/g, and 63.76 mg/g, respectively. There seems to be a close relationship between antioxidant activities, and antimicrobial activities and polyphenol content in natural plant. From these results, it is suggested that E. helioscopia could be used for the ethylacetate fraction and could be suitable for the development of a food preservative.

• Journal of Powder Materials
• /
• v.22 no.1
• /
• pp.39-45
• /
• 2015

In this study, cobalt nanopowder is fabricated by sonochemical polyol synthesis and magnetic separation method. First, sonochemical polyol synthesis is carried out at $220^{\circ}C$ for up to 120 minutes in diethylene glycol ($C_4H_{10}O_3$). As a result, when sonochemical polyol synthesis is performed for 50 minutes, most of the cobalt precursor ($Co(OH)_2$) is reduced to spherical cobalt nanopowder of approximately 100 nm. In particular, aggregation and growth of cobalt particles are effectively suppressed as compared to common polyol synthesis. Furthermore, in order to obtain finer cobalt nanopowder, magnetic separation method using magnetic property of cobalt is introduced at an early reduction stage of sonochemical polyol synthesis when cobalt and cobalt precursor coexist. Finally, spherical cobalt nanopowder having an average particle size of 22 nm is successfully separated.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.578-584
• /
• 2014

To synthesize Sn nanoparticles (NPs) less than 30 nm in diameter, a modified polyol process was conducted at room temperature using a reducing agent, and the effects of different pH values of the initial solutions on the morphology and size of the synthesized Sn NPs were analyzed. tin(II) 2-ethylhexanoate, diethylene glycol, sodium borohydride, polyvinyl pyrrolidone (PVP), and sodium hydroxide were used as a precursor, reaction medium, reducing agent, capping agent, and pH adjusting agent, respectively. It was found by transmission electron microscopy that the morphology of the synthesized Sn NPs varied according to the pH of the initial solution. Moreover, while the size decreased to 11.32 nm with an increase up to 11.66 of the pH value, the size increased rapidly to 39.25 nm with an increase to 12.69. The pH increase up to 11.66 dominantly promoted generation of electrons and increased the amount of initial nucleation in the solution, finally inducing the reduced-size of the Sn particles. However, the additional increase of pH dominantly induced a decrease of PVP by neutralization, which resulted in acceleration of the agglomeration by collisions between particles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.627-633
• /
• 2000

In this paper, the polyphase filter which has micro ripple characteristic in the passband is proposed. This filter consists of the digital all-pass filter of parallel structure and it is the half-band filter with all zeros in unit circle. To approach easily in designing hardware, we determined the coefficients to the 16bit 1.15 format. To evaluate the performance of this filter, we analyzed the phase characteristic in each branch and each filter with small coefficients. Also, we simulated the phase characteristic of passband and stopband, group delay. As the result, we obtained the micro ripple characteristic and linear phase in the passband.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.200-203
• /
• 2007

Parametric investigation of the polyol process for the preparation of carbon supported Pt nano particles as catalysts for fuel cells was carried out. It was found that the concentration of glycolate anion, which is a function of pH, plays an important role in controlling Pt particle size and loading on carbon. It was observed that Pt loading decreased with increasing alkalinity of the solution. As evidenced by zeta potential measurement, this was mainly due to poor adsorption or repulsive forces between the metal colloids and the supports. In order to modify the conventional polyol process, the effect of the gas purging conditions on the characteristics of Pt/C was examined. By the optimization of the gas environment during the reaction, it was possible to obtain high loading of 39.5wt% with a 2.8 nm size of Pt particle. From the single cell test, it was found that operating in ambient $O_{2}$ at 70oC can deliver high performance of more than 0.6 V at 1.44 A $cm^{-2}$.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.422-427
• /
• 2009

We have investigated the effects of polyols and NaCl on the rheological behaviours of surfactant mixtures. Sodium lauryl ether sulfate (SLES), cocamidopropyl betaine (CAPB), disodium cocoamphodiacetate (DSCA), cocamide DEA (CDEA) and lauroyl/myristoyl DEA (LMDE) were used as surfactants. The polyols added into the surfactant mixture were 1,3-butylene glycol, propylene glycol, glycerin, sorbitol, dipropylene glycol, PEG 1500 and PEG 400. The addition of amphoteric surfactant to SLES aqueous solution lead to increase the height of foam and the viscosity of the system. The addition of nonionic surfactant, LMDE or CDEA to the SLES aqueous solution increased the viscosity and the effect of LMDE was better than that of CDEA. The effect of adding polyols and NaCl into the surfactant mixture aqueous solution lead to increase or decrease the viscosity of the systems depending on the concentration of NaCl and the kinds of polyols. These results can be explained through the salting in or salting out of surfactant of the systems.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.669-675
• /
• 2009

A study has been made on the preparation of liquid resin of non-solvent and non-discoloration type for replacement of the soft PVC at room temperature. A new synthetic process was developed by structure-control design of polyurethane synthesis using pre-polymer and polyols as curing agent. The optimum recipe was made according to macro-glycols, molecular weight and reaction conditions, and the final products indicated that the mechanical properties such as tensile strength, tear strength and flexibility was very excellent than PVC products. Also, viscosity, hardness and color operations of the final products can be controlled by this system. And yellowing property by UV and NOx gas was improved from the various additive experiment.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.617-623
• /
• 1997

In this study, the mechanism on the phase behavior of polysorbate nonionic surfactants was investigated. In the ternary system containing water, hexanol as a polar oil and surfactant, the phase behaviors ranging from micellar region to occurrence of liquid crystal phase were observed by crossed microscope. As results, fine mosaic texture of liquid crystal phase and other phases were examined in the range of 20~70 wt%. This range if thought to give information about the basic data for the formulation of more stable emulsifying systems or dispersed systems. According to the alkyl chain length, three phase region diminished, whereas two phase range increased without an observation of the anisotropic liquid crystalline phase.